Extension of HT/LT Lines and providing transformer center to Annex Layout at Vasanthanarasapura Industrial Area, Tumakuru District

Extension of HT/LT Lines and providing transformer center to Annex Layout at Vasanthanarasapura Industrial Area, Tumakuru District

PART : A laying of 3CX400sqmm XLPE UG cable.

Supplying of 11 KV (E) 3 core 400 sqmm compacted circular aluminium conductor XLPE insulated screen with semicon & copper tape screened and colour strip w...

Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable Indoor termination kit complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Out door termination kit complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400 sqmm XLPE UG cable complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of manufacture sand for spreading and forming alround the UG cable complete with all lead and lift etc, as per specification and direction of Engineer in charge. 400x0.6x0.1=24

Supply of Cable Covering Tiles 250x125x40 mm or 125x125x40 mmcomplete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying of ‘B’ class 150mm dia GI pipe for culvert crossing and cable raising complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary...

Laying of high tension 11 KV(E) 3 core400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff. a. 3X300 to 3X500sqmm complete ...

Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm. complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Covering the cable with tile complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Refilling the cable Trenches with selected available earth from trench excavated including watering consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead of 2...

Laying of UG cable by Trench less technology by adopting horizontal baring and drawing of cables including preparation at side without HDPE pipe. a)Normal soil 6” bore size complete with all lead a...

Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type pot head (indoor / out door). a.3X300 to 3X400 sqmm complete with all lead and lift etc, as per specification and direction of Engin...

Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint. a. 3X300 to 3X400 sqmm complete with all lead and lift etc, as per specification and direction of Engineer ...

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary complete with all lead and lift e...

Laying of Route and Joint indicating stone complete with all lead and lift etc, as per specification and direction of Engineer in charge.

PART-B Extension of 11KV line using 3CX240 sqmm UG Cable

Supply of 11 kV, 3x240 Sqmm XLPE UG Cable complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Cable Termination Kit Indoor HS Type Suitable for 240 Sqmm Cable complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Cable Termination Kit Outdoor HS Type Suitable for 240 Sqmm Cable complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of manufacture sand for spreading and forming alround the UG cable complete with all lead and lift etc, as per specification and direction of Engineer in charge.140x0.1x0.5=7

Supply of manufacture sand for spreading and forming alround the UG cable (complete with all lead and lift etc, as per specification and direction of Engineer in charge. 140x0.1x0.5=7

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary...

Laying of high tension 11 KV(E) 3 core 240 sqmm in existing trench/GI pipe/stone ware/ RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff. a. 3X300 to 3X500sqmm. complet...

Refilling the cable Trenches with selected available earth from trench excavated including watering consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead of 2...

Making and fixing for 11 KV(E) 3 Core 240 sqmm heat shrinkable type pot head (indoor / out door). a.3X300 to 3X400 sqmm complete with all lead and lift etc, as per specification and direction of Engin...

Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Covering the cable with tile complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary complete with all lead and lift e...

Part - C Providing OD's & RMU's 350MVA, 630Amps

Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 5 Way RMU, 2 OD + 3 VL (One Incomer + Three Breaker...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm GI strip complete with all lead and lift etc, as per specification and direct...

Earth Excavation for RMU Foundation Depositing of earth on Bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr complete with all lead and lift etc, as per specification and direction of Engineer...

Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates and at S/s, DTC's, OD's, RMU's & fencing legs complete with all lead and lift etc, as per specification and di...

Supply of Providing Reinforecement TMT Fe 550/550 D complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top an...

Supplying & fixing M.S rectangular poles made out of 2 equal angles of 65* 65*6 mm welded together & fixed in cc (1:2:4) with 2 nos 16mm dia M.S hold fast rods each of lenth 25 cms, Including cost of...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial fill...

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., complete with all lead and lift etc, as p...

Part - D Extension of HT/LT lines

Supply of RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 complete with all lead and lift etc, as per specification and dir...

Supply of RCC Pole - 8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/GM/QS&S/05 Dtd 24.11.2018) as per IS-7855 complete with all lead and lift etc, as per specification and direction of Engineer in charge. for...

Supply of 11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No.ESCOM/GM/QS&S/04 Dtd 24.11.2018) complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LT 4 Pin Cross Arm - MS complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 1.1 kV Ceramic Pin Insulator (Shell only) complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of No. 8 Strain Insulator complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Spiral Earth Electrode complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Rabbit ACSR Conductor as per IS-398 (Part - 2/1996) (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM ) (complete with all lead and lift etc, as per specification and direction of Engineer ...

Erection of Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing of Horizontal cross arm and LT 4 pin corss arms including Single Top Support Brace and Insulator fixing complete with all lead and lift etc, as per specification and direction of Engineer in ch...

Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Stringing of ACSR Rabbit conductor complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Part E: Providing Transformer center on Spun Pole structure with 3 GOS system.

Supplying of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS...

Supply of Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500 kVA (UG Cable) - GI complete with all lead and lift etc, as per specific...

Supply of 11 kV, 200 Amps, Single Break GOS complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - Star 2 (5 Star Rated) with oil Cable entry type complete with all lead and lift etc, as per specification and direction of...

Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11 kV, 45 KN Polymeric Insulator complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supply of Caution/Danger Board complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of GI Wire 8 SWG complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Guy wire 7/10 SWG complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Al Lead Wire - 240 Sqmm complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Heavy Duty Long Barrel Copper Lug-240 Sqmm complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Spacer for DTC Wiring complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11 kV Lightning Arrester, Metal Oxide 9 kV, 5 kA Polymeric type with ground disconnector complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LT Distribution box for 250 kVA with 2 no MCCB complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 11 kV, Solid Core Type HG Fuse Unit complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil complete with all lead and lift etc, as per specification and direction of Engineer...

Concreting materials for 11 Mtrs Spun Pole a) Base concreting 1:2:4, 1000x1000x150 mm b) Pole concreting 1:2:4, 1000x1000x2500 mm c) Coping 1:2:4 (as per actuals) complete with all lead and lift etc...