Work of Construction of 33 KV Lines at 2 places under the area of EDD-III Ballia on semi-turnkey basis (under Additional Business plan 2024-25)

Supply of following decentralised materials as per RESSPO/PuVVNL norms at the work site.

33 KV ‘V’ Type Cross Arm at 33/11 KV S/S Maaldah

33 KV Side Cross Arm with Clamp with Nut Bolt washer at 33/11 KV S/S Maaldah

11 KV Side Cross Arm with Clamp with Nut Bolt washer at 33/11 KV S/S Maaldah

Cross Arm Holding clamp with Bolt & Nut at 33/11 KV S/S Maaldah

‘F’ Bracket with Bolt & Nut at 33/11 KV S/S Maaldah

Danger Board with Clamp with Bolt & Nut at 33/11 KV S/S Maaldah

Barbed wire at 33/11 KV S/S Maaldah

Earthing at 33/11 KV S/S Maaldah

Packing Piece. at 33/11 KV S/S Maaldah

M.S. Angle Iron 65x65x6mm bracing with clamps at 33/11 KV S/S Maaldah

Top Channel 125X65X3200 mm with clamps at 33/11 KV S/S Maaldah

P.G. Clamp for ‘Dog’ at 33/11 KV S/S Maaldah

‘E’ Bracket for 33 KV with Bolt & Nut at 33/11 KV S/S Maaldah

Guarding Channel/Angle 75x40x3010mm at 33/11 KV S/S Maaldah

Guarding clamp with Bolt & Nuts at 33/11 KV S/S Maaldah

G.I. wire 5 SWG at 33/11 KV S/S Maaldah

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor at 33/11 KV S/S Maaldah

Al. Lug 3x300 SQ mm at 33/11 KV S/S Maaldah

33 KV ‘XLPE’ C/J Kit 3x300mm² Straight through at 33/11 KV S/S Maaldah

Polymer 33 KV Disc Insulator 70 KN at 33/11 KV S/S Maaldah

Disc fitting B&S Type at 33/11 KV S/S Maaldah

33 KV Polymer Pin Insulator at 33/11 KV S/S Maaldah

33 KV isolater 800 amp at 33/11 KV S/S Maaldah

Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer with concrete grouting) at 33/11 KV S/S Maaldah

33 KV ‘V’ Type Cross Arm at 33/11 KV S/S Gaura Madanpura

Side Bracket / 11 kv Steel X-arm at 33/11 KV S/S Gaura Madanpura.

Earthing at 33/11 KV S/S Gaura Madanpura

Polymer 33 KV Disc Insulator 70 KN at 33/11 KV S/S Gaura Madanpura

33 KV Polymer Pin Insulator at 33/11 KV S/S Gaura Madanpura

33 KV Line Isolator & Bus Isolater, Structure at 33/11 KV S/S Gaura Madanpura

Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer with concrete grouting) at 33/11 KV S/S Gaura Madanpura

Nut & Bolt at 33/11 KV S/S Gaura Madanpura.

Shifting,loading ,carriage& unloading of following materials on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site . (at 33/11 KV S/S Maldah)

S.T. Pole 11 M long IS-410 SP-55

S.T. Pole 13 M long.

ACSR ‘Dog’ Conductor

33 KV ‘XLPE’ Cable 3x300mm² (900x2) mtr

Shifting,loading ,carriage& unloading of following materials on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site . (at 33/11 KV S/S Gaura madanpura)

S.T. Pole 11 M long IS-410 SP-55

ACSR ‘Dog’ Conductor

33 kv VCB with Singlr T/F Control Panel and CT200/100/1A With Structure

Work of following materials as per RESSPO/PuVVNL norms at the work site. (at 33/11 KV S/S Maldah)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Single pole structure on 13 mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Double pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Erection of Four pole structure on 11 Mtr ST Pole/PCC Pole 9Mtr including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per RESSPO Norms

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place by required place of forest department. ( Rate as per site due to heavy tree cuttung)

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per RESSPO Norms

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² S/T

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) of Double cable by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method as per site required.

Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3.5 m long Complete work.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Fabrication of 13 M long S.T. pole by welding 3.0 M long 5" dia M.S. pipe & Flat Iron 50x6 mm 12" long by providing M.S. pipe and all other materials by the contractor and only S.T. poles 11 Mtr. Long will be provided by the department.

Dismentling of existing 11 KV V-xarm/ top channel on existing poles and fitting of new side arm on existing poles & Shifting of Existing 11 KV line/LT Line on ACSR weasal/Dog Conducter by safe dismentling of ACSR weasal/Dog Conducter & Re-Stringing of ACSR weasal/Dog Conducter on shifted poles/side arm with complete work after providing all required materials for shifting.

Fabrication of 33 KV Cable stand at 132 KV S/S Sikandarpur 33KV Bay for cable hanging infront of 33 KV bay by 33 KV top channel and other required materials after providing all materials etc complete work .

Shifting of Existing single Poles of HT/LT lines for providing passage for 33 KV line Maldah by safe dismentling of existing single pole & Re-Erection of existing poles with complete work after providing side -arm with all accessories etc complete work after providing all required materials for above work.

Earthing of poles by MS earthing rod 20x2500 mm with GI Wire as per RESSPO Norms

Concriting of poles as per RESSPO Norms

Making plinth for Poles as per RESSPO Norms

Fixing of danger boards on poles as per RESSPO Norms

Fixing of Barbed wire on poles as per RESSPO Norms

Painting of ST Poles as per RESSPO Norms by red oxide paint & Alluminium paint by two coats .

Fitting of 33 KV MS Bracing angle on Double pole , TRI-Pole & four Pole

Jumpering of 33 KV Cable to overhead 33 KV Line by Alluminium Lug & PG Clamp for dog with complete work.( 1 Job=1 No D/P)

Fixing of PG Clamps

Dismentling of existing Damaged 33 KV isolater at 33/11 KV S/S Maldah Ballia & Installation of new 33 KV isolater on erected structure with complete fitting,setting & earthing after providing all required materials for insttalation of 33 KV isolater.

Work of following materials as per RESSPO/PuVVNL norms at the work site. (at 33/11 KV S/S Gauramadanpura)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Double pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per RESSPO Norms

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place by required place of forest department. ( Rate as per site due to heavy tree cuttung)

GI Pipe Earthing Complete for Cable jointing Kit with materials

Dismentling of existing 11 KV V-xarm/ top channel on existing poles and fitting of new side arm on existing poles & Shifting of Existing 11 KV line/LT Line on ACSR weasal/Dog Conducter by safe dismentling of ACSR weasal/Dog Conducter & Re-Stringing of ACSR weasal/Dog Conducter on shifted poles/side arm with complete work after providing all required materials for shifting.

Earthing of poles by MS earthing rod 20x2500 mm with GI Wire as per RESSPO Norms

Concriting of poles as per RESSPO Norms

Making plinth for Poles as per RESSPO Norms

Fixing of danger boards on poles as per RESSPO Norms

Fixing of Barbed wire on poles as per RESSPO Norms

Painting of ST Poles as per RESSPO Norms by red oxide paint & Alluminium paint by two coats .

Fitting of 33 KV MS Bracing angle on Double pole , TRI-Pole & four Pole

Jumpering of 33 KV Cable to overhead 33 KV Line by Alluminium Lug & PG Clamp for dog with complete work.( 1 Job=1 No D/P)

Dismentling of existing Damaged 33 KV isolater at 33/11 KV S/S Gauramadanpura Ballia & Installation of new 33 KV isolater on erected structure with complete fitting,setting & earthing after providing all required materials for insttalation of 33 KV isolater.

Dismentling of existing Damaged 33 KV VCB at 33/11 KV S/S Gauramadanpura Ballia & Installation of new 33 kv VCB with Singlr T/F Control Panel and CT200/100/1A With Structure & with complete fitting,setting & earthing after providing all required decentralised materials for insttalation of 33 kv VCB with Singlr T/F Control Panel and CT200/100/1A

MILAN CONTRUCTION WORK

PRAVEEN CONSTRUCTION AND SUPPLIER

M/s. Yuwa Shakti Construction