Supply, installation, testing and commissioning of Fire Safety equipment and Protecting System for Fodder hub at Nilambur under MRCMPU Ltd

Amount

TERRACE PUMP : Supply, installation, testing and commissioning of Electric Driven terrace pump for automatic pressurization of down comer system in cases of leakages, consisting of the following: a) Horizontal, end suction, monoblock type Centrifugal fire pump CI impeller, running at minimum 2900 RPM capable of delivering 1350 LPM 35 MTR HEAD b) Squirrel cage TEFC induction motor suitable for 415V, 3 phase, 50Hz AC supply of 15 HP conforming to IP-55 protection & class ‘F’ insulation. c) The rate shall include base plate common to pump and motors, foundation bolts, Coupling, coupling guards and standard mounting Accessories.(RCC foundation & Cabling included) Make - KIRLOSKAR

PRESSURE GAUGE: Supply,Installation,Testing and Commissioning charges of Pressure gauge arrangement for total system. Make -H Guru/Micro/Mass

PRESSURE SWITCH: Supply, Installation, Testing and Commissioning of Pressure switches of suitable range for pump sets with required accessories. Make -Indfoss/Danfoss

Above Ground Piping: Supply, Installation, Testing & Commissioning of M.S class 'B' (Medium class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, hanging supports with standard spacing, suitable supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 100 mm dia, Make: TATA/Jindal or equivalent

Above Ground Piping: Supply, Installation, Testing & Commissioning of M.S class 'B' (Medium class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, hanging supports with standard spacing, suitable supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 80 mm dia, Make: TATA/Jindal or equivalent

Above Ground Piping: Supply, Installation, Testing & Commissioning of M.S class 'B' (Medium class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, hanging supports with standard spacing, suitable supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 65 mm dia Make: TATA/Jindal or equivalent

Above Ground Piping: Supply, Installation, Testing & Commissioning of M.S class 'B' (Medium class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, hanging supports with standard spacing, suitable supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 50 mm dia, Make: TATA/Jindal or equivalent

Above Ground Piping: Supply, Installation, Testing & Commissioning of M.S class 'B' (Medium class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, hanging supports with standard spacing, suitable supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 40 mm dia, Make: TATA/Jindal or equivalent

Above Ground Piping: Supply, Installation, Testing & Commissioning of M.S class 'B' (Medium class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, hanging supports with standard spacing, suitable supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 25 mm dia, Make: TATA/Jindal or equivalent

Under Ground Piping: Supply, Installation,Testing and Commissioning of M.S pipe "B" Class Medium grade IS 1239, IS3589 complete with all necessary fittings such as bends, flanges, Nut bolts, gaskets, reducers etc. piping shall have anti corrosive wrapping treatment.100mm Dia, Make: TATA/Jindal or equivalent

Butterfly Valve: Supply,Installation,Testing and Commissioning of wafer type butterfly valve Stainless steel/SG iron disc , lever operated in PN 1.0 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type. 100mm dia, Make - Lehry/Kartar

Butterfly Valve: Supply,Installation,Testing and Commissioning of wafer type butterfly valve Stainless steel/SG iron disc , lever operated in PN 1.0 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type. 80mm dia, Make - Lehry/Kartar

Non Return Valve : Supply, Installation, testing and commissioning of Slim seal Non Return Valves wafer type, SS Disc with required flanges,nuts,bolts,washers,gaskets etc., complete as required.100 mm dia, Make - Lehry/Kartar

Ball Valve:Supply, Installation, Testing and Commissioning of Ball valves with fittings of screwed end type.20mm dia, Kartar/Neu G

Hydrant Valve: Supply,Installation,Testing and Commissioning of ISI Marked single headed Hydrant valve 63 mm dia, oblique type, SS body & working parts, with instantaneous hose coupling adaptor and PVC blank cap & chain. Make -Andex/Elitech

Branch Pipe:Supply,Installation,Testing and Commissioning of branch pipe made out of SS short male instant. Inlet male threaded outlet, fitting with 15 mm bore nozzle ISI , Make -Andex/Elitech

Fire Hose: Supply,Installation,Testing and Commissioning of ISI Marked Fire Fighting Hose , all synthetic fiber circular woven jacketed,control perculated delevery hose , 38kg/cm2 burst pressure, 22kg/cm2 proof pressure, 14 kg/cm2 working pressure, bearing IS:636-88 type B , in 15 mtrs length, 63 mm dia, duly bounded with SS body coupling 63 mm dia pair of male & female parts, instantaneous type . Make -CRC/Tulsi

Hose Reel Drum:Supplying, Installing, Testing & Commissioning of Hose reel drum made of Mild Steel, with mounting brackets 19 mm dia nylon braded smooth surface rubber thermo plast hose 30 mtrs length with shut off nozzle Make - Kartar/Elitech

Hose Box:Supply,Installation,Testing and Commissioning of Hose Box (Fire Hose cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of M.S Sheet with glass fronted hinged doors and lock. - Make - Friends

Air Release Valve: Supply, installation, testing and commissioning of Air release valve, 20mm dia, Make - Kartar/Neu G

Fire Brigade Connection(FBC): Supply, installation, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built - in S.S Non- return valves instantaneous coupling type arranged on 100 mm dia flanged outlet complete with bolts, nuts and gaskets etc as required. Pipe manifold and connected to discharge header. Make -Andex/Elitech

Sprinkler Supply,Installation,Testing and Commissioning of Sprinkler 15 mm size , 1/2" BSPT end connection having temp. rating 68 deg. C made out of forged brass and SS decorative finish with supports. UL listed a Pendent type, Make- Omex/Kartar

18 M.S Structural support Supply,Installation,Testing and Commissioning of M.S structural support including, cutting welding with nut, bolt & Anchor fastners etc…including 2 coats enamel painting over enamel primer

Fire Extinguisher Supply, Installation of Fire Extinguisher ABC type fire extinguisher ISI mark ,4 kg capacity with initial charger and installation brackets. Make -Andex/Safex/Safepro

Supply,Installation,Testing and Commissioning of 2 Zone Fire Alarm Control Panel conventional type, micro processor based control panel, made of MS powder coated CRCA sheet with audio and visual display & supplied with all standard mounting accessories. Make - Ases/Ravel

Supply,Installation,Testing and Commissioning of Manual Call Point break glass type powder coated MS box ,24/12 Volt DC operated, and with necessary attachments. Make - Ases/Ravel

Supply,Installation,Testing and Commissioning of Audio alarm hooter (sounder) powder coated MS box, 24/12 Volt DC operated with necessary attachments.Make - Ases/Ravel

Supply,Installation,Testing and Commissioning of Fire Alarm Cable - PVC insulated fire retardant copper flexible wire 1 sq.mm with ISI mark.Make - Finolex/Vilvex/Bonton/Gloster

Supply,Installation,Testing and Commissioning of 20 mm dia PVC conduit ISI mark with elbow, tees, jn: boxes, saddle clip and with necessary fittings. Make - ISI Marked

charge for Concealing of PVC Conduit

charge for Concealing of MCP & Hooter

SIGNAGES: Supply & installation of 1 x 6W, 240 V, 1 ph, 50 Hz indoor type emergency light fixture with 1.3 AH 4hrs battery backup unit, LED Lamps, indicating Fire Exit, fire Duct and Exit; recess mounted type. 24 hrs x 7 days working conditional. (Ups power supply to be provided near to the device)

Supply, installation of in position the signages of "Fire boards approved by Kerala state fire service made out of PVC rigid sheet 3mm thick with computer cut luminescent self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with screws". with lettering "ASSEMBLY AREA".

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, luminescent self adhesive vinyl painted foam board, complete with mirror fasteners: FIRE DUCT

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, luminescent self adhesive vinyl painted foam board, complete with mirror fasteners: EXIT

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, luminescent self adhesive vinyl painted foam board, complete with mirror fasteners: FIRE EXIT

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, luminescent self adhesive vinyl painted foam board, complete with mirror fasteners: NO SMOKING

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, luminescent self adhesive vinyl painted foam board, complete with mirror fasteners: EVACUATION PLAN

ESCORTSENGINEERS PVT.LTD

Devi Engineering Works

RAYAN FIRE PROTECTION SYSTEMS

USHA FIRE TECH

KKL FIRE EQUIPMENT

COCHIN FIRE TECH INDIA PVT. LTD.