REPAIR MAINTENANCE OF INTERNAL WIRING MCBs DBs SUB MAIN WIRING AND ELECTRICAL FITTINGS IN OTM ACCN AT ALHILAL MIL STN

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area , two single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping of 25mm size and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS-H cable as earth continuity conductor for One light point/ fan/bell point controlled by one switch & making good to disturbed surface as well as matching with existing whitewash colour/surface complete all as specified.

All as per the description of Serial item No. 2 above but one 5 pin socket outlet, 5/6 Amp on the same board complete all as specified and directed.

All as per the description of Serial item No. 2 above but one 5 pin socket outlet, 5/6 Amp on independent board complete all as specified and directed.

All as per the description of Serial Item No. 2 above but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire,complete all as specified and directed.

M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, two single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including concealed PVC rigid conduit not less than 20mm wide, ISI marked with accessories fixed wall/roof/floor etc, with mild steel/pressed steel sunken box duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS-H cable as earth continuity conductor for One light/ fan/ bell point controlled by one switch & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

All as per the description of Serial item No 6 above but for 5/6 Amps socket outlet on same board.

All as per the description of Serial item No 6 above but for 5/6 Amps socket outlet on independent board.

All as per Item No. 6 above but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

S&F switch piano 6 Amp flush type single pole one way with ISI marked,complete all as specified and directed.

S&F socket outlets 2-in-1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F socket outlets 16 Amps, 3 pin flush type, complete all as specified and directed.

S&F switch piano 16 Amp flush type single pole one way with ISI marked,complete all as specified and directed.

S&F ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified and directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ding dong bell musical type AC 230 volt single pole complete all as specified and directed.

S&F bell Push flush type 5A switch, complete all as specified and directed.

Supply and fix steped type electronic fan regulator flush type on the existing phenolic laminated sheet suitable for 240 volts AC 100 watt etc. complete all as specified and directed.

Supply & fix LED bulb of 9 watt complete all as specified and directed.

S&F LED complete fitting including batten & T-8 Retro LED polytcarbonate 1 x 20 watt tuberod, appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete all as specified and directed. Make: Bajaj Cat Part No. for batten BLRB-DB118 and Cat Part No. for tube rod BLRB20WLED/Havells Cat Part No. for batten STREAKNEOT8UPTO1x22wSSBSWH Cat part of tube rod TITANIAEO1213T8SSTL20WLED865SPC/Polycab Cat Part No. for Battern PID0502001/Cat Part Tube rod LTU0101009P

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head fitting LED luminaire comprising of high brightness LEDs 10 watt, IP66 protection class complete all as specified and directed. Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPC/Bajaj Cat Part No. BIBWP 10W LED WH/Philips Cat No. WT202WLED 10S

S&F LED light fitting 1x 36/33 watt, 2ft x 2ft, ceiling surface type environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed. Make: Havells Cat part No. PLANO2x2PLR36WLED840S/Bajaj Cat Part No. BZRSQL 36 W LED GX WH/Philips Cat Part No. RC375B LED 865/840 PSU W60L60 52 WH

S&F Factory made DB TPN 4 way double door with suitable size of copper bus bar concealed in wall IP 43 protection,415 V,3 phase 50 Hz for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. Note: Distribution board and MCB's should be same make.

S&F Factory made DB SPN 12 way double door with 200 Amps rated bus bar concealed in wall IP42/ 43 protection,240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. Note: Distribution board and MCB's should be same make.

S&F Factory made DB SPN 8 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection,240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. Note: Distribution board and MCB's should be same make.

S&F Factory made DB SPN 4 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection,240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. Note: Distribution board and MCB's should be same make.

S&F MCB SP ‘B’ curve, 10KA, 240V, 6 to 32 amps, in the MCB DB including necessary connection complete all as specified and directed.

S&F MCB SPN ‘C’ curve, 10KA, 240V, 32 amps, in the MCB DB including necessary connection complete all as specified and directed.

S&F MCB SPN ‘B’ curve, 10KA, 240V, 40 to 63 amps in the MCB DB including necessary connection complete all as specified and directed.

S&F MCB TPN ‘B’ curve, 10KA, 415V, 63 amps in the MCB DB including necessary connection complete all as specified and directed.

M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS-H, cable of 2 run 6 Sq mm for phase and neutral and one run of 6 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS-H, cable drawn through non metallic rigid PVC conduit not less than 20mm dia ISI marked including all conduit and fixing accessories complete all as specified and directed. Note:- (i) Two runs of cable for phase/neutral, one run of cable for earth and one run PVC conduit will be measured and paid as one unit length complete all as specified and directed. (ii) Wiring shall be done in proper colour coding.

M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS-H, cable of 2 run 4 Sq mm for phase and neutral and one run of 4 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS-H, drawn through non metallic rigid PVC conduit not less than 20mm dia ISI marked including all conduit and fixing accessories complete all as specified and directed. Note:- (i) Two runs of cable for phase/neutral, one run of cable for earth and one run of PVC conduit will be measured and paid as one unit length. (ii) Wiring shall be done in proper colour coding.

Taking down unserviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

Taking down main switches, distribution board, steel enclosure with MCB's any way and rating including wooden board or from steel boad and making good disturbed surfaces complete.

S&F in repairs 6 amps flush type single pole one way, ISI marked complete all as specified and directed.

S&F in repairs socket outlets 2-in-1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F in repairs bell Push flush type 5A switch, complete all as specified and directed.

S&F in repairs switch piano 16 Amp flush type single pole one way with ISI marked,complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1, 5/3 pin, 6 and 16 Amp flush type universal, ISI marked complete all as specified and directed.

S&F in repairs socket outlets 6 and 16 Amps 2-in-1, 5 pin flush type, complete all as specified and directed

S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F in repairs ding dong bell type AC, 230 volts, single pole complete all as specified and directed.

S&F in repairs capacitor 2.50 Mfd, 240V, complete all as specified and directed.

S&F in repairs lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repairs MCB SPN ‘C’ curve, 10KA 40 to 63 amps complete all as specified and directed.

S&F in repairs MCB SP ‘B’ curve, 10KA 6 to 32 amps complete all as specified and directed.

S&F in repairs MCB TPN ‘B’ curve, 10KA, 415V, 63 amps in the MCB DB including necessary connection complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 9" x 11" including cutting of sheet for fixing switch/socket complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 8" x 5" including cutting of sheet for fixing switch/socket complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 5" x 5" including cutting of sheet for fixing switch/socket complete all as specified and directed.

S&F in replacement of PVC non metallic casing caping of 25mm size with accessories including dismantling/taking down of old unserviceable/broken PVC conduit/casing caping fixed on surface/concealed including making good the disturbed surface complete all as specified and directed.

S&F in replacement PVC flexible pipe 20mm ISI marked complete all as specified and directed.

S&F in repairs environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head fitting LED luminaire comprising of high brightness LEDs 10 watt, IP66 protection class complete all as specified and directed. Make Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPC/ Bajaj Cat Part No. BIBWP 10W LED WH/Philips Cat Part No. WT202WLED 10S

S&F light fitting pre wired suitable for single T8 LED tube along with fitting of nominal wattage - 18 watt, Lumen out put- 2100 Lm, Colour Temp- 6500 Kelvin, Size & length- G13/T8/4 Feet, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and as directed.

S&F in repairs surface mounting 2 ft length, 10/12 watt LED batten with light fitting complete all as specified and directed. Make: Havells Cat Part No. LUMILINEPLUSBS10WLED865SPCWH/ Bajaj Cat Part No. BCLSB10W WH/Philips Cat part No. BN021LED125 6500K/4000k PSU

S&F in repairs 4ft length ultra bright 20W LED polycarbonate tube rod with THD<10% with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders (single side connection) complete all as specified and directed. Make: Havells Cart Part No. PHOTONULTRA2.01213T8SSTL20WLED865SPC or equivalent in Crompton Greaves /Bajaj/Philips/Wipro as approved by GE.

S&F in repairs LED light fitting 1 x 36/33 Watt, 2ft x 2ft ceiling surface type environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed. Make: Havells Cat Part No. PLANO2x2PLR36WLED840S/Bajaj Cat part No. BZRSQL 36W LED GX WH/Philips Cat part No. RC375B LED 865/840 PSU W60L60 52WH

S&F in repairs 3 pin plug top 6 Amp, complete all as specified and directed. Make: Crabtree/Havells/Anchor/SSK

S&F in repairs 3 pin plug top 16 Amp, complete all as specified and directed. Make: Crabtree/Havells/Anchor/SSK

S&F in repairs switch socket combination 20A unit box 2 fixing holes complete all as specified and directed.

S&F in repairs switch socket combination 6A unit box 2 fixing holes complete all as specified and directed.

Note for Srl item No. 35 to 61 1. The contractor has to maintain a separate complaint slip book and complaint register for attending the day to day complaints pertain to internal electrification. 2. The Contractor/rep have to collect daily complaints from E&M complaint cell Alhilal Mil Stn and get them signed from user after completing the job and submit to E/M complaint cell. 3. The contractor has to complete the work assigned for above items within 36 hours failing which recovery at the rate Rs. 25 per day per complaint will be recovered. 4. The contractor will ensure deployed of sufficient manpower with equiped all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job and also ensure as availability of every type of requisite T&P items to his tradesman

S&F factory made CRCA sheet powder coated double door panel board, 2mm thick, suitable size, wall mounted type partially grouted in wall and with locking arrangement, handle and including provn of the followings and connection & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. (a) MCB TPN 63A, 415 volts, C Series - 01 Nos (Incoming). (b) MCB SPN 6-32 Amp, 230 volts- 05 Nos (outgoing for each qtr & common stair case light point) (c) Fixing only existing energy meter of old DB-04 Nos

M&L 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 06 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site complete all as specified and directed.

M&L 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 10 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion.

Note:-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item. (iv) The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item.

M/s Sheetal Associates

SAINI AND SAINI BUILDERS

M/S SEALINE BUILDERS

M/S MALHI CONSTRUCTIONS