REPAIRS TO COMPOUND WALL BOUNDARY WALL JAFRY WALL CULVERT DRAIN FOOTPATH HARDSTANDING ETC IN CERTAIN OTM ACCN OF OMC ENGR REGT AND ASC SUPPLY AREA UNDER GE MISSAMARI

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for PCC (1:4:8) type-D2 with using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc.(each layer), laid bedded and pointed in any cement mortar complete all as directed.

M&L Bricks, sub class B, laid on edge in brick walls drain; old size bricks, bedded in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), including all mouldings in cement conctete Type B0 1:2:4 (12.5mm graded aggregate) and set in cement mortar 1:4 complete all as specified and directed.

M&L providing plain cement concrete type B0 (1:2:4), (using 12.5 mm graded stone aggregate), as in copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and including liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of new wall surface applying Two of cement base paint over and including priming coat of exterior primer complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any positioncomplete all as specified and directed.

M&L Reinforced cement concrete ( Nominal mix) Type A1, 1:1.5:3 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L Reinforced cement concrete ( Nominal mix) Type A1, 1:11.5:3 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts concrete complete all as specified and as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, etc. flat, roughed finished surfaces, complete all as specified and as directed.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions. Square,rectangular or polygonal, roughed finished surfaces, complete all as specified and as directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and conosoldiation complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including 20mm thick backing layer in cement mortar 1:6 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L 100mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as sub base of floor finished even and fair complete all as specified and directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in pavement/hard standing laid in alternate bays (not exceeding 2 Sqm each) and finished even and fair without using extra cement complete all as specified and directed.

M&L Heavy duty coloured vitrified tiles 300x 300x10mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, including dismantling existing unservicaeable floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Heavy duty coloured vitrified tiles 15mm thick for treads of stair case ( extra grip near step edge self embossed tread lines,bull nosed tile, anti skid)set and jointed in neat cement slurry & pointed in white or colour cement to match set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, including dismantling existing unservicaeable floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Heavy duty coloured vitrified tiles 12mm thick for Risers of stair case set and jointed in neat cement slurry & pointed in white or colour cement to match set and jointed in neat cement slurry and pointed in white or coloured including 10mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes, including dismantling existing unservicaeable floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 including dismantling existing unservicaeable floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

Demolition and breaking up reinforced drain pipes 600mm bore set in cement mortar of any description including demoliation of PCC pacling and haunching of pipe complete all as directed.

M&L 600mm bore Reinforced concrete pipes, class NP3, laid and jointed with collars complete all as specified and directed.

M&L 600mm bore Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete Type C2, 1:3:6 (40mm grraded aggregate) complete all as specified and directed.

S&F 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer, complete all as specified and as directed.

M&L preparation new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair, 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as directed.

S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil, each n exc 0.5 cu. m, getting out,and removing soil out of the site ,complete all as specified and as directed.

M&L for PCC (1:2:4) type-B2 with using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Please Enable Macros to View BoQ information