Notified Area Office Ankleshwar

Name of Work: - Providing, Laying & Fitting Of 80mm paver block at different location in housing

area at NA, GIDC, Anklehwar.

Sr. No Item Qty Unit Rate

Box Cutting for road suface to proper slope and

camber for making a base for road work

1 including removing the excavated stuff and 5251.00 Cum 104.20

despositing on the road side slope as directed

upto 50.0m lead.

Graded Granular sub base (GSB)

Providing & laying Closed Graded Granular sub

base (GSB) laying in uniform layer(each layer

should be less than 150 mm)of graded granular

material consisting of black trap machine cut

crushed stone aggregate as per grading - V

given in table 400-1 of the specification

MORT&H and compactor to the required density

with 8 - 10 tonne vibratory roller with plain drum

or heavy pneumatic tyred roller of minimum

to 300 KN weight in all seasons as per MORT&H

maintaining the required slope & grade during

the operation as approved by the engineer in

charge & watering to the proper moisture

content and sprinkled with the help of truck

mounted water tank fitted with suitable

arrangement. (fully saturated having CBR value

Providing, laying, spreading and compacting

graded stone aggregate to wet mix macadam

spacification including trimix the materials with

water at OMC in mechanical mix plant carriage

of mixed materials by tipper to site laying in

uniform layers (Layer should not be more than

150 mm)with paver in sub base/base course on

well prepared surface and camber with Sensor

paver consolidation by vibratory road roller to

achieve the desired density by using machine

crushed chips as per required gradation mixing

with required optimum quantity of water incl

material, labour, plant and machinary and

equipment etc. complete.

Providing And fixing pre-cast Steel dye Inter

locking Concrete block 80mm thick with grade

of concrete M-30 pnumatic compreesd by

vibrated mechanically pressed and as

approved design including 40mm thick sand

4 layer for levelling and filling the joint with sand in 12503.00 Sqm 913.89

proper line and level etc. compacted as

directed by Engineer-in-charge. (The Side/Edges

paver blocks must be required Machine Cut).

Providing and laying Cement concrete 1:2:4 ( 1:

Cement, 2: Coarse sand, 4: graded stone

5 aggregates20 mm Niminal Size) and Curing 93.00 Cum 3481.28

complete excluding cost of formwork in (A)

Foundation and Plinth.

( * Rate are exclusive of GST.)

I / we agree to carry out the above work at __________% above the estimated rate put to tender

I / we agree to carry out the above work at __________% below the estimated rate put to tender.

Estimated amount Estimated amount

put to tender Rs.

17493330.91 put to tender Rs.

Net amount Rs.___________________ Net amount Rs.______________________

Signature of Contractor with Seal Chief Officer

NAA GIDC Ankleswhar