RequiredExperience with Government
RequiredOEM Authorization Certificate Bid to RA enabled Yes Chest Press - Outdoor Gym Equipments ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) TYPE Type Chest Press Double Chest Press Double SIZE Length 1000 * Width 650 * Height 1600 * CAPACITY Maximum User Weight ( Kg ) 110 110.0 MATERIAL Governing Specification for GI BIS specification No IS 1239 ( Part 1 )- 2004
RequiredBIS specification No IS 1239 ( Part 1 )- 2004
Required1/5 Pipes latest latest All the GI Pipes are ISI marked Yes Yes Main Central Pipe 100mm Nominal Bore G.I. Pipe 100mm Nominal Bore G.I. Pipe Main Central Pipe
RequiredClass as per IS 1239 Heavy Heavy Designation of Main Central Pipe ( as per IS 1161 ) - * Handle Frame 40mm Nominal bore G.I. pipe 40mm Nominal bore G.I. pipe Handle Frame Pipe
RequiredClass as per IS 1239 Heavy Heavy Designation of Handle Frame Pipe ( as per IS 1161 ) - * Seat Frame 40mm Nominal Bore G.I. Pipe 40mm Nominal Bore G.I. Pipe Seat Frame Pipe
RequiredClass as per IS 1239 Heavy Heavy Designation of Seat Frame Pipe ( as per IS 1161 ) - * Connecting Links 40mm Nominal Bore G.I. Pipe 40mm Nominal Bore G.I. Pipe Connecting Links Pipe
RequiredClass as per IS 1239 Heavy Heavy Designation of connecting link Pipe ( as per IS 1161 ) - * Foot Rest Pipe 32mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe Foot Rest Pipe
RequiredClass as per IS 1239 Heavy Heavy Designation of Foot Rest Pipe ( as per IS 1161 ) - * MS Foundation Plate Thickness 12 12.0 Foundation Pipes with anchoring 500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm 500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 100mm 100mm
Required150mm 2/5 Foundation Pipe
RequiredClass as per IS 1239 Heavy Heavy Designation of Foundation Pipe ( as per IS 1161 ) - * Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. * Seat and Back Rest 6mm thick
RequiredFibre Reinforced plastic with uniform bending radius to avoid sharp edges 6mm thick
RequiredFibre Reinforced plastic with uniform bending radius to avoid sharp edges Hand Grips Rubber * Nuts and Bolts for Assembly G.I. * Movement must be supplied with bearings Yes * Bearings Ball Bearing Ball Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes * Closing Caps of open ends of the pipes
Requiredbearings
Requiredbushes and base G I Caps * Thickness of closing caps ( min ) 2 * All Plastic Components U V stabilised
Requiredweather resistance * COLOUR Colour Green * Paint/Finish Powder Coated
RequiredUV resistant * Paint Coating Thickness ( min ) 80 * OTHER REQUIREMENTS Ergonomic Design Yes * Moving Scope should be Limited Yes * There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes * Equipment shall be free from entrapments and sharp edges Yes * 3/5 Installation Instructions must be provided Yes * Installation Included Included Safety and quality Requirements European Standard EN 16630: 2015 latest * Instruction Plate Stainless Steel
RequiredSize 150 X 230 X 0.7mm
Requiredwith indelible printing * CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630 Registration No and Validity of Registration - * APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation
Requiredif desired by buyer Yes * WARRANTY Warranty ( years ) 2 2.0 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
