PERIODICAL SERVICES SMART PERIODICAL AND REP TO ROOF CEILING ROOF PAINT REP TO CHAJJAS AND OHT FOR CERTAIN MD AND OTM ACCN OF 7A, 161 MH, MES IB, 5119 COY, ASC AND OMC CHAMPAWAT UNDGER GE PITHORAGARH

Amount

DESCRIPTION OF ITEMS

M&L for applying one coat of white wash on plastered or unplasred surfaces of walls of old treated surfaces all as specified includingPreparation of old plastered surfaces or unplastered white washed/colour /cement base paint wasshed surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified

Ditto all as per item No 1 above but on ceiling surfaces

M&L for applying one coat of oil bond distemper on old distempered surfaceses of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails, applying putty wherever required and making good complete all as specified

Ditto all as per item No 3 above but on ceiling surfaces

M&L for applying one coat of cement base paint of old plastered or unplasred surfaces of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered white washed/colour /cement base paint wasshed surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified

M&L for applying one coat of plastic emulsion paint incl. prepation of old painted plastered surfaces of walls over 10 cm in with or girth all as specified

Ditto all as per item No 6 above but one coat of plastic emulsion paint on ceiling

M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description or girth over 10cm width or girth all as specified

Ditto all as per item No 8 above but applying one coat of synthetic paint on surface of steel n.exc 10cm width or girth.

M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description over 10 cm width or girth all as specified.

Ditto all as per item No. 10 above but applying one coat of synthetic paint on surface of wooden n.exc 10cm width or girth.

M&L french polishing on surfacesof any description , with or girth including cleaning and preparing the surfaces including a coat of wood filler

M & L for preparation of old decorated surfaces of walls and applying one coat of exterior weather proof acrylic emulsion paint complete all as specified

M & L for preparation of old surfaces and applying one coat of acrylic emulsion paint on ceilings complete all as specified

M&L for writing letters or figures (Block, romman, itallic or Indian) n. exc. 30 cm high, complete all as specified and directed.

M&L for stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of walls, concrete etc finished even and smooth without using extra cement in complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of walls, concrete etc finished even and smooth without using extra cement complete all as specified and directed.

Ditto all as per item No 19 above but 5 mm thick as on ceiling in C:M(1:4)

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified.

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.

Preparation of Newly plastered surfaces of walls and applying two coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old painted steel roof surfaces of corrugated/ plain steel sheet of any description, over 10cm in width or girth, not otherwise described and applying one coat of antisol roof paint (MB Green) complete all as specified and as directed.

M&L for preparation of old painted surfaces of concrete, brickwork or stone etc over 10 cm width or girth and applying a coat of synthetic enamel paint (any tint) complete all as specified and as directed

M&L for cleaning of vegitation growth on roofs (any number of stories) of buildings, removing algal growths by brooming down or steel wire brushing and applying bleaching powder complete.

Taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc by means of MS scrapper patty or any other suitable tools and removing to a distance 500 mtr from the starting point and depositing as directed.

Cleaning of vegetation, plants, bushes etc from roofs / walls including taking out of root and making good the disturbed surface with PCC 1 : 2 : 4 and plastering with CM 1 : 4 and painting with matching finish complete all as specified and directed.

Demolition of plain Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of cement concrete ( unreinforced ) above ground floors n. exc 15cm thickness i.e from RCC roof slabs/terrace.

M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement

Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges Type C-1, 1:3:6 (20 mm graded ag-gregate)

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc.

M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement.

M&L rendering or screed bed 5 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC @ 2% by wt of cement including finishing even and smooth without using cement.

Supply only integral water proofing compound.

Providing and laying APP modified water proofing membrane 3 mm thcik with non woven ployster reinforcement having weight not less than 3.5 Kg per sqm over a coat bituminous primer oil based for membrane by the respective manufacture @ 0.30 ltr per sqm including overlapping as specified and as approval of make as specified in PS including two coat of bituminous based aluminium paint on top surface as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 complete all as specified and as directed

Supply and fixing 0.63 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutter, drip, crumple and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specied.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specied.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed

Dismantling framed trusses span n exc 10 mtr

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

Ditto all as per item No 46 above but except material complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over one coat of red oxide.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed.

Demolition of precast concrete block walling, dressed stone work built in cement mortar complete all as specified and directed.

Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Material & Labour for Providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar ( 1:6 ) complete all as specified and directed.

Material & Labour for 6 to 8 mm dia TMT bars , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in Slabs,chajja supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab,chajja such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

M&L for repair to existing chajjas of any thickness not exc 100mm thick and including necessary form work ,reinforcement ,RCC (Nominal mix) (1:1.5:3),rendering in CM 1:4 etc & applying 2 coat of cement base paint / weather coat complete all as specified and directed by Engr in charge.

M&L for repair to leakage /seepage from 'J' Hooks of CGI /AC/Galvalume roof sheets by replading cup washer and bitumen washer including necessary T & P complete all as specified and directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S &F PVC (SWR) 75 mm dia vent cowl

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

Supply & Fix 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

Supply & Fix 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor complete all as specified and directed.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M&L for applying two coat OBD on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

S&f GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists etc in walls, ceilings, beams etc including all laps, cutting and waste complete all as specified and as directed.

M/S YASHCON CONSTRUCTIONS

M/s D K Sharma