REPAIRS TO STEEL OR WOODEN FURNITURE INCLUDING POLISHING AND PAINTING AT PANGODE MILITARY STATION UNDER GE ARMY TRIVANDRUM

Amount

Almirah Large Steel (FD-1031 , FD-1033 and FD/E6/MAP/18)

Removing UNSV leg from almirah large steel and S&F new leg made of 1mm thick MS sheet as per drg and specification.

Removing UNSV shelf from almirah large steel and S&F new shelf made of 1mm thick MS sheet as per drg and specification.

Removing UNSV 3 way locking device from almirah large steel and S&F new 3 way locking device as per existing pattern of drg and specification.

Removing UNSV cleates from almirah large steel and S&F new cleates as per drg and specification.

Removing UNSV locks from almirah large steel and S&F new locks of approved make as per drg and specification.

Removing UNSV CP handle from almirah large steel and S&F new CP handle and appropriate bush as per drg and specification.

M & L for preparation of inner and outer surface of Almirah large steel and filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Almirah Medium steel (FD-1032)

Removing UNSV leg from almirah medium steel and S&F new leg made of 1mm thick MS sheet as per drg and specification.

Removing UNSV shelf from almirah medium steel and S&F newshelf made of 1mm thick MS sheet as per drg and specification.

Removing UNSV 3 way locking device from almirah medium steel and S&F new 3 way locking device as per existing pattern of drg and specification.

Removing UNSV locks from almirah medium steel and S&F new locks of approved make as per drg and specification.

Removing UNSV CP handle from almirah medium steel and S&F new CP handle and appropriate bush as per drg and specification.

M & L for preparation of inner and outer surface of Almirah med steel and filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Charpoy GI Pipe 32mm with plywood top (FD-220)

Removing UNSV plywood and MS flat iron from charpoy GI pipe and tightening the frame and S&F new MS flat iron 40mmx3mm each 2 Nos welded as per existing pattern and S&F new plywood 12mm BWR of approved make with appropriate 6mm screw headless as directed by Engineer-in-charge.

Removing UNSV long rail from charpoy GI 32mm and S&F new long rail as per drg and specification.

Removing UNSV short rail and making short rail from UNSV long rail removed from existing charpoy and fix as per drg and specification.

Removing UNSV leg and making leg from UNSV short rail removed from existing charpoy and fix arrangement for musquito frame holder as per drg and specification.

Removing UNSV elbow from charpoy GI and S&F new elbow 32mm of approved make as per drg and specification.

Removing UNSV check nut from charpoy GI and S&F new check nut 8mm as per drg and specification.

Chair Verandah (FD-256 & FD-259)

Removing UNSV cane from chair verandah and clean the surface with steel brush and apply one coat of paint enamel white with entire satisfation and caning with 4mm wide new cane of approved make in mat pattern and S&F new rubber shoe of best quality as per drg and specification.

M&L for Spot welding on chair verandah above as required as directed by Engr-in-charge. (spot size not less than 10mm).

Locker Bedside Steel (FD-1029)

Removing UNSV leg from locker bed side steel and S&F new leg made of 1mm thick MS sheet as per drg and specification.

Removing UNSV hanging rod and S&F new CP hanging rod 18mm as per drg and specification.

Removing UNSV hasp and stapple and S&F new hasp and stapple 100mm of best quality be fixed with appropriate nut and bolt as per drg and specification.

Removing UNSV handle 100mm and S&F new CP handle 100mm of best quality be fixed with appropriate screw as per drg and specification.

M & L for preparation of interior and exterior surfaces of locker bed side steel and filling with metal putty and denting and applying one coat of synthetic enamel paint OG colour complete all as specified and directed.

M&L for Spot welding on locker above as required as directed by Engr-in-charge. (spot size not less than 10mm).

Table 3'x3'x760mm Steel (FD-1009)

Removing UNSV top from table 3'x3' steel and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

M&L for preparation the suface and apply one coat of synthetic enamel OG in entire satisfaction as directed.

M&L for Spot welding on table above as required as directed by Engr-in-charge. (spot size not less than 10mm).

Chair CBA steel (FD-75M )

Removing UNSV seat and back from chair CBA steel with arms and clean the surface and apply one coat of paint synthetic enamel OG as per drg and specification.

S&F seat with appropriate screw to chair CBA steel made out of Ist class teak wood and apply black synthetic enamel paint and wooven with 2mm cane plastic with perimeter wooven with 3mm cane as per drg and specification.

All as per item No 7.02 here-in-before but back.

Removing UNSV arm rest and S&F new arm rest as per drg and specification.

Chair CBB steel (FD-75M )

Removing UNSV seat and back from chair CBB steel with out arms and clean the surface and apply one coat of paint synthetic enamel OG as per drg and specification.

S&F seat with appropriate screw to chair CBB steel made out of Ist class teak wood and apply black synthetic enamel paint and wooven with 2mm cane plastic with perimeter wooven with 3mm cane as per drg and specification.

All as per item No 8.02 here-in-before but back.

Charpoy T/S for OR with ply top (CECZ-FD 77/ FD/E6/MAP-II/01)

Removing UNSV plywood from Charpoy T/S for ORS and S&F new plywood 12mm commercial BWR with appropriate nut and bolt as per drg and specification.

M&L for clean the surfaces and apply one coat of synthetic enamel paint black as directed.

S&F shoes rubber of superior quality.

Table Office Clerk Steel (FD-1004)

M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OG as directed.

Removing UNSV top from table clk steel and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

M&L for Spot welding on table above (spot size not less than 10mm)

Table Office Officer Steel (FD-1003)

M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OG as directed.

Removing UNSV top from table office offr steel and S&F new top made out of 18mm thick prelamintaed particle board beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

M&L for Spot welding on table above as required as directed by Engr-in-charge. (spot size not less than 10mm).

Table 3x2 with dr steel

Removing UNSV top from table 3x2 with drawer steel and S&F new top made of prelaminated particle board 18/19mm and 4mm teak wood beading around the top as per drg and specification.

M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OG as directed.

Bed hard 6'x3' with hard top FD/E6/MAP/08(R)

M&L for removing UNSV plywood from bed hard 6'x3' and apply one coat of paint black synthetic enamel and S&F new plywood 12mm commercial BWR type with appropriate nut and bolt as per existing and S&F new rubber shoes of best quality as approved . Rest all as per drg and specification.

Charpoy folding with hard top FD-388(R)

Rremoving the UNSV ply wood and clean the surfaces and apply one coat of paint synthetic enamel and S&F new ply wood commercial 12mm BWR type with appropriate nut and bolt as per existing and S&F new rubber shoes of best quality as approved . etc complete all as per drg and specification.

Teapoy verandah

Removing UNSV top from Teapoy verandah and apply one coat of paint enamel white and S/F new top made of prelaminated particle board 18/19mm exterior grade and 4mm teak wood beading around the top as per drg and specification.

M&L for Spot welding on teapoy verandah above as required as directed by Engr-in-charge. (spot size not less than 10mm).

Table Dining 6/8 Persons (FD-239, 273 & 376)

Removing UNSV top from table dining 6 pers and apply french polish in high glossy finish and S&F new top made out of 18mm thick prelamintaed particle board exterior grade beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

S&F for replacement of long rail made of Ist class teak wood as per drg and specification.

All as per item No 16.02 here-in-before but short rail.

All as per item No 16.02 here-in-before but corner.

Removing UNSV top from table dining 8pers and apply french polish in high glossy finish and S&F new top made out of 18mm thick prelamintaed particle board exterior grade beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

S&F in replacement of long rail made of Ist class teak wood as per drg and specification.

All as per item No 16.06 here-in-before but short rail.

All as per item No 16.06 here-in-before but corner.

Chair Dining (FD - 228, 270 & 279)

Removing UNSV front leg from chair dining and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 17.01 here-in-before but back leg.

All as per item No 15.01 here-in-before but front rail.

All as per item No 15.01 here-in-before but back rail.

All as per item No 15.01 here-in-before but side rail.

All as per item No 15.01 here-in-before but stiffener complete.

Removing UNSV cane from chair dining and re-caning with 2 mm wide new plastic cane, half round and perimeter wooven with 3 mm wide cane plastic and clean the surface and apply french polish in high glossy finish complete all as specified and directed.

Chair Easy (FD-17(M) & 229)

Removing UNSV front leg from chair easy and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 18.01 here-in-before but back leg.

All as per item No 18.01 here-in-before but front rail.

All as per item No 18.01 here-in-before but back rail.

All as per item No 18.01 here-in-before but side rail.

All as per item No 18.01 here-in-before but cane patti.

Removing UNSV cane from chair easy seat and back and re-caning with 2 mm wide new plastic cane, half round and perimeter wooven with 3 mm wide cane plastic and clean the surface and apply french polish in high glossy finish complete as per drawing all as specified and directed.

Chair Writing (FD-280)

Removing UNSV front leg from chair writing and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 19.01 here-in-before but back leg.

All as per item No 19.01 here-in-before but front rail.

All as per item No 19.01 here-in-before but back rail.

All as per item No 19.01 here-in-before but side rail.

All as per item No 19.01 here-in-before but stiffener complete.

All as per item No 19.01 here-in-before but arm rest.

Removing UNSV cane from chair writing and re-caning with 2 mm wide plastic cane, half round and perimeter wooven with 3 mm wide new cane plastic and clean the surface and apply french polish in high glossy finish complete as per drawing all as specified and directed.

Bed Plywood Top (FD-246 & 247)

Removing UNSV plywood from bed hard and S&F new plywood 12mm commercial BWR type with appropriate wooden screw and clean the surface and apply french polish in high glossy finish as per specification.

Removing UNSV long rail from bed hard and S&F new long rail made of Ist class teak wood as per drg and specification.

Removing UNSV head board from bed hard and S&F new head board as per drg and specification.

Removing UNSV foot board from bed hard and S&F new foot board as per drg and specification.

Peg Table (FD-277)

Removing UNSV leg from peg table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 21.01 here-in-before but for long rail.

All as per item No 21.01 here-in-before but for short rail.

Removing UNSV top from peg table and S&F new top made out of 18mm thick prelamintaed particle board exterior grade beaded with 4mm thick teak wood beading and apply french polish as per drg and specification.

Side Board (FD-241)

Removing existing UNSV side board and S & F new teak wood legs of 125 mm height and 45 mm x 45 mm in section up to 45 mm from top, new drawers with 19 mm x 19 mm teak wood bearers and 6 mm thick plywood bottom, new doors with 18 mm pre-laminated particle board exterior grade, new top with 18 mm prelaminated particle board exterior grade back side with 6 mm thick commercial ply wood and clean the surface and apply french polish in high glossy finish as per specification.

Table Dressing Gents with Mirror (FD-379)

Removing UNSV mirror from table dressing gents and repairs the frame and S&F new mirror 5mm of approved make and clean the surface and apply french polish in high glossy finish as per specification.

Removing UNSV knob from table dressing gents and S&F new knob 40mm of best quality and as directed.

Table Dressing Ladies with Mirror (FD-378)

Removing UNSV mirror from table dressing ladies and repairs the frame and S&F new mirror 5mm of approved make and clean the surface and apply french polish in high glossy finish as per specification.

Removing UNSV channel and sliding shutter and S&F new aluminium channel and glass shutter 3mm as per drg and specification.

Removing UNSV knob from table dressing ladies and S&F new knob 40mm of best quality and as directed.

Sofa Sets 5 Seater (FD-281,373)

Removing UNSV foam cushion from sofa set 5 seater and S&F new foam cushion 530x500x100mm and 40 density of approved Make: Kurlon/Sleepwell duly upholsterised with tapestry cloth rate not less than Rs 300/- per metre and provide Zip for easy usage and as directed.

Removing UNSV foam cushion from sofa set 4 seater and S&F new foam cushion 530x500x100mm and 40 density of approved Make: Kurlon/Sleepwell duly upholsterised with tapestry cloth rate not less than Rs 300/- per metre and provide Zip for easy usage and as directed.

Sofa Sets 5 Seater (FD-373),Removing existing unserviceable/ damaged cushioned seat and back and providing new foam cushion 75mm thick, 530mm x 500mm size and 32 density duly upholterised with best quality tapestry (Rate of tapestry cloth rate not less than Rs 300/- Per mtr) as per drawings and specification and directed by Engr-in-charge.

Chair Dining Long Back (FD-357)

Removing UNSV damged seat of chair dining long back and re-tightening the frame and repairs the perished seat and back with foam cushion 50mm and upholsterised with cloth tapestry rate not less than Rs 300/- per metre of approved cloth with entire satisfaction and as directed.

Bin linen multi purposes FD/E6/MAP/09

Removing UNSV door shutter 2 Nos each from bin linen multi purposes and S&F new door made of prelaminated particle board 18/19mm thick exterior grade with hinges as per existing pattern etc complete all as per drg and specification.

Removing UNSV top from bin linen multi purposes and S&F new top made of prelaminated particle board 18/19mm thick exterior grade with hinges as per existing pattern etc complete all as per drg and specification.

Removing UNSV side from bin linen multi purposes and S&F new side made of prelaminated particle board 18/19mm thick exterior grade with hinges as per existing pattern etc complete all as per drg and specification.

Removing UNSV shelf from bin linen multi purposes and S&F new shelf made of prelaminated particle board 18/19mm thick exterior grade with hinges as per existing pattern etc complete all as per drg and specification.

Chair dining cushioned seat:-

Removing UNSV seat complete and re-tightening the frame and replace the seat frame, S&F new foam cushion 50mm of 32 density duly upholtersied with cloth tapestry of approved quality Note: (Rate of tapestry not less than Rs 300/- per metre) and clean the entire surface and apply french polish in high glossy finish as per specification.

Chair school with writing board:-

Removing UNSV seat and witing board and apply one coat of paint black enamel & S&F new seat PVC of approved make and writing board made out of prelamintaed particle board 18/19mm exterior grade as per drg and specification.

Hat stand with mirror

Rremoiving UNSV hooks and S&F new hooks aluminium as drg and specification.

Removing UNSV mirror from hat stand and S&F new mirror 5mm thick of approved make as per existing pattern and clean the surface and apply french polish in high glossy finish as per specification.

Table writing

Removing UNSV top from table writing and S&F new top made of prelaminated particle board 18/19mm exterior grade and 4mm teak wood beading around the top and clean the entire table surface and apply french polish in high glossy finish as per specification.

Removing UNSV leg from table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 31.02 here-in-before but for long rail.

All as per item No 31.02 here-in-before but for short rail.

Table 3'x2'

Removing UNSV top from table 3x2 and S&F new top made of prelaminated particle board 18/19mm exterior grade and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

Removing UNSV leg from table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 32.02 here-in-before but for long rail.

All as per item No 32.02 here-in-before but for short rail.

Teapoy (W)

Removing UNSV top from Teapoy and S&F new top made of prelaminated particle board 18/19mm exterior grade and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

Removing UNSV leg from peg table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 33.02 here-in-before but for long rail.

All as per item No 33.02 here-in-before but for short rail.

Table centre

Removing UNSV top from Table centre and tightening the frame and S&F new top made of prelaminated particle board 18/19mm exterior grade and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

Removing UNSV leg from peg table and S&F new leg made of Ist class teak wood and tightening the frame as per drg and specification.

All as per item No 34.02 here-in-before but for long rail.

All as per item No 34.02 here-in-before but for short rail.

Table dining 1200x900mm

Removing UNSV top from table dining and tightening the frame with necessary corner and S&F new top made of prelaminated particle board 18/19mm exterior grade and 4mm teak wood beading around the top as per drg and clean the entire surface and apply french polish in high glossy finish as per specification.

Removing UNSV leg from Table dining 1200 x900mm and S&F new leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

S&F in replacement of long rail made of Ist class teak wood as per drg and specification.

All as per item No 35.03 here-in-before but short rail.

Chair dining MAP (FD/MAP-II/05)

Removing UNSV seat PVC from chair dining and tightening the frame and S&F new seat PVC of approved make and clean the entire surface and apply french polish in high glossy finish as per specification.

Removing UNSV front leg from chair dining and S&F new front leg made out of Ist class teak wood free from creaks and knots as per drg and specification.

All as per item No 36.02 here-in-before but back leg.

All as per item No 36.02 here-in-before but front rail.

All as per item No 36.02 here-in-before but back rail.

All as per item No 36.02 here-in-before but side rail.

M & L for clean the surface with emery paper and filling the creaks and bores with putty and apply fench polish in high glossy finish all as specified and directed for following furniture items:-

Sofa set 4 Seater

Sofa set 5 Seater

Bed plywood top

Chair Dining

Chair Dining MAP

Chair Writing

Teapoy (W)

Peg Table

Table Dinning 6 Persons

Table Dinning 8 Persons

Table Writing

Table Dressing Gents with Mirror

Table Dressing Ladies with Mirror

Table Centre

Table Bed Side

Chair Easy

Chair dining long back

Chair dining cushioned seat

Side Board

Stool dressing CB

Mahesh Traders

BALAJISTEELINDUSTRIES

M/s National Traders

Yash enterprises

Surabhi Buildcon

SHANMUGA TRADERS