SPECIAL REPAIRS FOR REPLACEMENT OF BER LIFTS AT GODAVARI BLDG AT NCB AREA AND MO V AREA UNDER GE UTILITY-II, VISAKHAPATNAM

Amount

[c] Battery operated emergency light [LED Ceiling Fitting] alarm [speaker for emergency alarm system to be fixed] and stop button in car with rechargeable arrangement for battery. [d] Designer Six sleek circular LED light fitting 5 Watts x 6 Nos. in false ceiling. [e] Provision of one cross flow fan suitable for recessed mounting in false ceiling. [f] Provision of premium quality Jet black Granite stone slab of 18-20 mm thick as in flooring for lift car (Not more than two parts) over 3 mm thick aluminium chequered sheet. [g] Nonstop button/ independent operation. [h] Over load warning indicator with both audio and visual type with overload protection/ tripping system having relays , etc. [j] Front landing door operations with a minimum time of 10 sec and up to a maximum time of 30 seconds. [k] Stainless steel sliding doors with front opening for all Landings made of 16 gauge stainless steel sheet with Mirror finish with vision panel of size 300 X 1700mm covered with 8mm thick toughened plain glass. [l] All the dimensions of the lift and connected items shall be designed in conformity with IS 14665 standards and the contractor shall submit the design drawing to Accepting Officer for approval before commencementof work. The body shall be stainless steel of 16 gauge with Mirror finish with 38mm dia stainless steel hand rail with hairline finish. [m] Set of three in number limit switches at the bottom and top most position of lift hoist ways as specified in IS. [n] Stainless steel hand rail 38mm dia with hairline finish. [o] Specification plate with complete details [p Full length display indicator panel.

[q] Provision of suitable phase reversal relays to the controller to protect lift/ equipment against phase reversal, phase failure and low voltage. [r] Provision of Intercom. [s] Continuous earthing for machine and equipment [t] Steel Wire rope of adequate size as per relevant IS and as per manufacturers specification. [u] Other standard fixtures and fittings like guide rails, sheaves, counter weights with guards, buffers, gear unit brakes, control panel, car operational panel, governor, locks, power control and trailing cables complete all as per latest IS specifications. [v] Main drives and controls shall be high efficient and low power consumption. [w] Lift design, specifications, drawings, manufacturers instructions shall be got approved from Accepting Officer before placing order for procurement. [x] The contractor shall carry third party load testing for each lift installed once in every six months till defect liability period and shall submit staisfactory test results and the rate quoted shall be deemed to be included for this provision. [y] The Contractor shall shift the old dismantled lift to MES Storeyard as per direction of Engineer-in-Charge and the rate quoted shall be deemed to included transportation charges.

Notes: The lift shall be provided with and including the following: [a] Fireman Switch [b] Automatic Rescue Device [ARD] during power failure including manual operation provision with suitable capacity of battery designed for running the lift with full load. [c] Battery operated emergency light [LED Ceiling Fitting] alarm [speaker for emergency alarm system to be fixed] and stop button in car with rechargeable arrangement for battery. [d] LED light fitting 5 Watts x 6 Nos. in false ceiling. [e] Provision of one axial flow fan suitable for recessed mounting in false ceiling. [f] Provision of 5 mm thick aluminium chequered plate in flooring for lift car. [g] Nonstop button/ independent operation. [h] Over load warning indicator with both audio and visual type with overload protection/ tripping system having relays , etc. [j] Front landing door, operations with a minimum time of 10 sec and up to a maximum time of 30 seconds. [k] Stainless steel sliding doors with front opening for all Landings made of 16 gauge stainless steel sheet with Mirror finish/ moonrock finish with vision panel of size 300 X 1700mm covered with 8mm thick toughened plain glass. [l] All the dimensions of the lift and connected items shall be designed in conformity with IS 14665 standards and the contractor shall submit the design drawing to Accepting Officer for approval before commencementof work. The body shall be stainless steel of 16 gauge with Mirror finish/ moonrock finish with 38mm dia stainless steel hand rail with hairline finish.

[m] Set of three in number limit switches at the bottom and top most position of lift hoist ways as specified in IS. [n] Stainless steel hand rail 38mm dia with hairline finish. [o] Specification plate with complete details [p Full length display indicator panel Dot matrix type (COP) [q] Provision of suitable phase reversal relays to the controller to protect lift/ equipment against phase reversal, phase failure and low voltage. [r] Provision of 3 way Intercom system with built in system announcing system without hand set. [s] Continuous earthing for machine and equipment [t] Steel Wire rope of adequate size as per relevant IS and as per manufacturers specification. [u] Other standard fixtures and fittings like guide rails, sheaves, counter weights with guards, buffers, gear unit brakes, control panel, car operational panel, governor, locks, power control and trailing cables complete all as per latest IS specifications. [v] Main drives and controls shall be high efficient and low power consumption. [w] Lift design, specifications, drawings, manufacturers instructions shall be got approved from Accepting Officer before placing order for procurement. [x] The contractor shall carry third party load testing for each lift installed once in every six months till defect liability period and shall submit staisfactory test results and the rate quoted shall be deemed to included for this provision. [y] The Contractor shall shift the old dismantled lift to MES Storeyard as per direction of Engineer-in-Charge and the rate quoted shall be deemed to included transportation charges.

VTC ENGINEERING P LIMITED

Escon Elevators Pvt Ltd