GE-K-39-2023-24 SPECIAL REPAIR OF CERTAIN ITEMS IN BLDG NO T-108 TO T-466A AT MH KARGIL AND BLDG NO T-106B TO T-113C (OR BATHROOM) AT 92 FD REGT UNDER GE KARGIL

Amount

Taking down shutters of any description exc 1 sq. m but n exc 2 sq m each all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F Aluminum Anodised barrel tower bolts of extruded section, 100mm long.

S & F anodised aluminium handle, cast type anodised section 100mm size.

S&F second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

S & F butt hinges medium weight cold rolled mild steel of 100mm long

S&F Aluminum Anodised barrel tower bolts of extruded section, 200mm long.

S & F anodised aluminium handle, cast type anodised section 150mm size.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F sheet glass 3.00 mm thick ordinary quality, and glazing with oil putty in square nexc. 0.50 Sqm each pane all as specified & directed.

M&L for prepration of new wooden surfaces of any description, not otherwise descri-bed over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for prepration of old wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finishing of surface even and smooth with out using extra cement all as specified.

M&L for preparing new plastered surfaces of wall applying two coats of cement paint all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surfaces of wall applying two coats of cement paint all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finishing of surface even and smooth with out using extra cement all as specified.

M&L for preparing new plastered surfaces of wall applying three coats of white wash all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surfaces of wall applying three coats of white wash all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:3 as in ceiling finishing of surface even and smooth with out using extra cement all as specified.

M&L for preparing new plastered surfaces of ceiling applying three coats of white wash all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surfaces of ceiling applying two coats of white wash all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed by Engr-in-Charge.

S & F glazed ceramic tiles colured of size 300m x 200mm x 7mm thick on vertical surfaces such as dados, skirting etc, set and jointed inn neat cement slurry and pointed in white cement with pigment to match over 10mm thick rendering in CM 1:6 all as specified.

S&F in repair stainless steel squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe all as directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc all as specified and directed by Engr-in-Charge.

S&F 25mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc all as specified and directed by Engr-in-Charge.

S&F 25mm PP-R Gate valves (brass insert) as per requirement of the site

S&F in repair fancy type bib taps 15mm bore, cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe and fixed chromium plated

Dismantling water tanks exc 500 but n exc 1000 litres and removing to store

S & F rotational moulded polyethylene water storate tank 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms)

S&F 75 mm Bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC (SWR) bend 75mm bore

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door.

S&F 110mm PVC (SWR) vent cowl

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F grating doom 100mm dia of PTMT Minimum weight 25gms

S&F grating doom 125 mm dia with waste hole of PTMT.Minimum weight 40gms

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repairs vitreous China wash basin, while, flat back, size 550x400irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including bracket

S&F 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F waste pipe 32mm dia

S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)

M&L for pre-cast cement concrete block masonry 1:3:6 type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

S&F in repair chromium plated fancy stop valves, 15mm bore cast opper alloy,screwed down, high pressure,with crutch or butterfly handle, crewed both nds for iron pipe or for unions and fixed

S&F PVC connection 15mm size with PTMT nuts of length 600mm

S&F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F 40mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F urinal waste pipe 40mm dia

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) on floor sub base all as specified and directed by Engr-in-Charge.

M&L for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engr-in-Charge.

S&F galvanised, corrugated mild steel sheeting 0.63mm with two corrugations side lap fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 all as specified and directed by Engr-in-Charge.

S&F plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and directed by Engr-in-Charge.

M&L for prepration of new steel surfaces of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position as in unframed work, complete all as specified and directed.

S&F for second class soft wood (KAIL) plain fillets area exc 13 & n exc 25 sqcm square,rectangular or triangular in section, clean sawn, secured with nails or brads all as specified and directed.

S&F 9mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails to timber frame work all as specified and directed.

S&F second class soft wood moulding as in cornices, picture rails and the like sectional area n exc 6.00 Sqm cm all as specified and directed.

M&L plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads.sectional area n exc 3.00 Sqm cm all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc over 40 Sqcm, in any position as in framed work, complete all as specified and directed by Engr-in-Charge.

S&F Fe 410-W (Grade -E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. as diretected and specified by Engr-in-Charge.

S&F 12mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails to timber frame work all as specified and directed.

S & F 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing fixed with nails to timber frame work on ceiling complete all as specified and directed.

M&L Plain fillets of second class soft wood (KAIL), wrought, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, square, rectangular or triangular in section, secured with nails, complete all as specified and directed by Engr-in-Charge.

M&L for Mouldings, beads, , n. exc 75mm girth on softwood complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

M & L for second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick second class soft wood Glazed and skeleton shutters, open rebated and prepared to raceive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, ed-es of framing plain, chamfered.all as specified and directed.

S & F second class soft wood (KAIL), 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkats complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F anodised aluminium barrel tower bolt extruded sections 150 mm size complete all as specified and directed.

S&F 75mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc

M&L 25mm thick cement concrete (1:2:4) type B-0 (using 12.5 mm graded aggregate) as sub base to floor as specified.

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection, etc complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.

M&L preparation of newly plastered wall and applying two coats of Oil Bound Distemper over a coat of primer including applying 1mm wall care putty for smoothness of surfaces all as specified and directed by Engr in-charge.

M & L for complete removal of existing treatment and applying two coats of Oil Bound Distemper over a coat of primer including applying 1mm wall care putty for smoothness of surfaces all as specified and directed by Engr in-charge.

M & L for complete removal of existing treatment and applying Two coats of cement base paint complete all as specified and directed.

M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed.

M&L for taking down sub main wiring or service wire of 1100 volts grade heavy duty cable PVC insulated aluminium conductor of any size complete all as specified and directed.

M&L of point wiring for light/fan/bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box/PVC box, surface/ flush type with 3 mm thick pre laminated hylem sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc complete all as specified and directed.

M&L for point wiring for socket outlet with FRLS cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, for multi 5 pin 5 amp flush type socket outlet on independent board, complete all as specified and directed.

M&L for point wiring for socket outlet with FRLS cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, for multi 6 pin 15 amp flush type socket outlet on independent board, complete all as specified and directed.

Supply and fixing Switch piano flush type single pole one way, 5/6 Amps, ISI Marked fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and directed.

Supply and fixing Switch piano flush type single pole one way, 15/16 Amps ISI Marked fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and directed.

Supply and fixing Socket Outlet 2 in 1, 6 Amp flush type fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and directed.

Supply and fixing Socket Outlet 5 in 1, 16 Amps flush type fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and directed.

M&L of ceiling rose on PVC square Blocks surface bakelite 3 terminal complete all as specified and directed.

Supply & Fixing LED complete fitting 1 x 20 Watt, appx 4 feet long extruded polycarbonate environment friendly and aluminium housing & integrated driver, including electric connection with using 2 core flexible copper conductor cable of size 1.0sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications all as directed. (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10 C to plus 45 C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) IP rating IP- 20. (g) Aluminium housing & Integrated Electronic driver (h) LED Driver of the make as of the luminire. (j) LED driver should be complete with all protections viz open/short protection, over voltage protection, all as per standard design of manufacture. (k) Surge protection minimum 2.5 KV. (l) CCT 6500K (m) CRI : More than 80. (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily).

M&L for Distribution Board double Door 12 way SPN made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting with bus bar rating 200 Amps, dust and vermin proof , IP-43 protected, suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

Supply and fixing 220V 10KA 'C' curve MCB SPN of 32 amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed..

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F of Magnum Flood light LED 70 W with high pressure die cast housing and IP65 Protection,including hanging materials complete,all as specified and directed. Make Havells / PHILIPS/ Crompton or equivalent

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipement,including watering arrangement with GI light grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber.CI cover with frame,40 mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata,returning,filling,removal of soil outside MD land,filling of charcoal and salt complete all as shown in electrical plate No.3 of MES Sch Part I,connected to Earthing test point all as specified and directed on testing on completion. Notes: (i) Earth continuity conductor including protection pipe up to 7.5 metres from earth electrode will be include in unit rate,complete all as specified and directed. (ii) Arrangement for earth resistance test should carried out by the contractor.no extra payment shall be provided for the same.

Supply & fixing light grade GI Pipe of size 40 mm bore, ISI marked on pole/wall for cable protection complete all as specified and directed.

M&L of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 4 core complete all as specified and directed.

Excavation in trenches hard and dense soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, not exceeding 10 sqm on plan and not exceeding 1.5Mtr in depth & getting out of hard and danse soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as specified and directed.

Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm laid dry over electric cable for protection,complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable of 16 sq mm, flat or circular.

S&F Switch socket combination 2 in 1, 6A flush type

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal

Supply & Fixing LED complete fitting 1 x 18/20 Watt, appx 4 feet long extruded polycarbonate environment friendly and aluminium housing & integrated driver, including electric connection with using 2 core flexible copper conductor cable of size 1.0sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications all as directed. (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10 C to plus 45 C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) IP rating IP- 20. (g) Aluminium housing & Integrated Electronic driver (h) LED Driver of the make as of the luminire. (j) LED driver should be complete with all protections viz open/short protection, over voltage protection, all as per standard design of manufacture. (k) Surge protection minimum 2.5 KV. (l) CCT 6500K (m) CRI : More than 80. (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily).

Supply & Fixing LED complete fitting 1 x 10 Watt, appx 2 feet long extruded polycarbonate environment friendly and aluminium housing & integrated driver, including electric connection with using 2 core flexible copper conductor cable of size 1.0sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications all as directed. (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10 C to plus 45 C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) IP rating IP- 20. (g) Aluminium housing & Integrated Electronic driver (h) LED Driver of the make as of the luminire. (j) LED driver should be complete with all protections viz open/short protection, over voltage protection, all as per standard design of manufacture. (k) Surge protection minimum 2.5 KV. (l) CCT 6500K (m) CRI : More than 80. (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily).

M&L for Distribution Board double Door 4 way SPN made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting with bus bar rating 200 Amps, dust and vermin proof , IP-43 protected, suitable for incorporation of MCB’s and isolators etc complete all as specified and directed,including taking down of DB's.

Note : Deduction for amount of Rs 49285.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S Ghulam Mustafa