Rewinding, Repairing And Maintanance of Power pump And mechanical accessories installed at RWSS And Bore wells In Aurangabad District for the year of 2020-21

Amount

Submersible Pump Motor Rewinding charges

0 to 2.5 HP Submersible Motor Rewinding Charages

3 to 5 HP Submersible Motor Rewinding Charages

6 to 7.5 HP Submersible Motor Rewinding Charages

8 to10 HP Submersible Motor Rewinding Charages

11 to 15 HP Submersible Motor Rewinding Charages

16 to20 HP Submersible Motor Rewinding Charages

21 to 25 HP Submersible Motor Rewinding Charages

26 to 30 HP Submersible Motor Rewinding Charages

31 to 40 HP Submersible Motor Rewinding Charages

41 to 50 HP Submersible Motor Rewinding Charages

V.T.Pump Motor Rewinding charges

0 to 15 HP V.T. Motor Rewinding charges

20 to 25 HP V.T. Motor Rewinding charges

26 to 40HP V.T. Motor Rewinding charges

41 to 80 HP V.T. Motor Rewinding charges

Monoblock /centrifugal coupled Motor Rewinding charges

0 to 5 Monoblock /centrifugal coupled Motor Rewinding charges

6 to 7.5 Monoblock /centrifugal coupled Motor Rewinding charges

8 to11 Monoblock /centrifugal coupled Motor Rewinding charges

12 to 20 Monoblock /centrifugal coupled Motor Rewinding charges

21to 25 Monoblock /centrifugal coupled Motor Rewinding charges

26to30 Monoblock /centrifugal coupled Motor Rewinding charges

31 to 40 Monoblock /centrifugal coupled Motor Rewinding charges

41 to 50 Monoblock /centrifugal coupled Motor Rewinding charges

51 to 75 Monoblock /centrifugal coupled Motor Rewinding charges

Ejectopump /Jet pump Motor Rewinding Charges

0 to 3 HP Ejectopump /Jet pump Motor Rewinding Charges

3 to 5 HP Ejectopump /Jet pump Motor Rewinding Charges

Sinkoblock /Openwell submersible Motor Rewinding Charages

0 to 5 HP Sinkoblock /Openwell submersible Motor Rewinding Charages

5 to 10 HP Sinkoblock /Openwell submersible Motor Rewinding Charages

11 to 20 HP Sinkoblock /Openwell submersible Motor Rewinding Charages

21 to 30 HP Sinkoblock /Openwell submersible Motor Rewinding Charages

Submersible Pump Openingservicing greasing Pump shaft checking & fitting charges

0 to 10 HP Submersible Pump Openingservicing greasing Pump shaft checking &fitting charges

11 to 25 HP Submersible Pump Openingservicing greasing Pump shaft checking &fitting charges

26 to 50 HP Submersible Pump Openingservicing greasing Pump shaft checking &fitting charges

Monoblock / centrifugal Ejecto pump Motor servicing ,greasing, Pump shaft checking & fitting charges

0 to 10 HP Monoblock / centrifugal Ejecto pump Motor servicing ,greasing, Pump shaft checking & fitting charges

11 to 20 HP Monoblock / centrifugal Ejecto pump Motor servicing ,greasing, Pump shaft checking & fitting charges

21 to 50 HP Monoblock / centrifugal Ejecto pump Motor servicing ,greasing, Pump shaft checking & fitting charges

51to75 HP Monoblock / centrifugal Ejecto pump Motor servicing ,greasing, Pump shaft checking & fitting charges

Sinkoblock /Openwell submersible Motor servicing,greasing, Pump shaft checking & fitting charges

0 to 10 HP Sinkoblock /Openwell submersible Motor servicing ,greasing, Pump shaft checking & fitting charges

11 to20 HP Sinkoblock /Openwell submersible Motor servicing ,greasing, Pump shaft checking & fitting charges

21 to 30 HP Sinkoblock /Openwell submersible Motor servicing ,greasing, Pump shaft checking & fitting charges

Providing & fixing Spare parts for Submersible Motor& pump including Jobwork

Providing & fixing bronze Impeller suitable for 100 mm dia submersible Pump

Providing & fixing bronze Impeller suitable for 150 mm dia submersible Pump

Providing & fixing bronze Impeller suitable for200 mm dia submersible Pump

Providing & fixing Pump Impeller Noril

Providing & fixing noril Impeller suitable for 100 mm dia submersible Pump

Providing & fixing noril Impeller suitable for 150 mm dia submersible Pump

Providing & fixing noril Impeller suitable for 200 mm dia submersible Pump

Providing & fixing Thurst Block

Providing & fixing Thurst Block suitable for 100 mm dia submersible Pump

Providing & fixing Thurst Block suitable for 150 mm dia submersible Pump

Providing & fixing Thurst Block suitable for 200 mm dia submersible Pump

Providing & fixing Thurst Bearing (with Sirclip lock)

Providing & fixing Thurst Bearing suitable for 100 mm dia submersible Pump

Providing & fixing Thurst Bearing suitable for 150 mm dia submersible Pump

Providing & fixing Thurst Bearing suitable for 200 mm dia submersible Pump

Providing & fixing Pump bush

Providing & fixing pump Bush suitable for 100 mm dia submersible Pump

Providing & fixing pump Bush suitable for 150 mm dia submersible Pump

Providing & fixing pump Bush suitable for 200 mm dia submersible Pump

Providing & fixing Motor bush

Providing & fixing Motor Bush suitable for 100 mm dia submersible Pump

Providing & fixing Motor Bush suitable for 150 mm dia submersible Pump

Providing & fixing Motor Bush suitable for 200 mm dia submersible Pump

Providing & fixing Pump coupling mail/ femaile

Providing & fixing pump coupling mail/femaile suitable for 100 mm dia submersible Pump

Providing & fixing pump coupling mail/femaile suitable for 150 mm dia submersible Pump

Providing & fixing pump coupling mail/femaile suitable for 200 mm dia submersible Pump

Providing & fixing Non return valve assemble

Providing & fixing Non return valve assemble suitable for 100 mm dia submersible Pump

Providing & fixing Non return valve assemble suitable for 150 mm dia submersible Pump

Providing & fixing Non return valve assemble suitable for 200 mm dia submersible Pump

Providing & fixing suction housing

Providing & fixingsuction housing suitable for 100 mm dia submersible Pump

Providing & fixingsuction housing suitable for 150 mm dia submersible Pump

Providing & fixingsuction housing suitable for 200 mm dia submersible Pump

Providing & fixing Upper & lower flange

Providing & fixingUpper & lower flange suitable for 100 mm dia submersible Pump

Providing & fixingUpper & lower flange suitable for 150 mm dia submersible Pump

Providing & fixingUpper & lower flange suitable for 200 mm dia submersible Pump

Providing & fixing Pumpshaft

Providing & fixing pumpshaft suitable for 100 mm dia submersible Pump

Providing & fixing pumpshaft suitable for 150 mm dia submersible Pump

Providing & fixing pumpshaft suitable for 200 mm dia submersible Pump

Motor rotor balansing, Silver brazing, turning & shaft checking etc lathe maching Job work

Motor rotor balansing, Silver brazing, turning & shaft checking etc lathe maching Job work suitable for 100 mm dia submersible Pump

Motor rotor balansing, Silver brazing, turning & shaft checking etc lathe maching Job work suitable for 150 mm dia submersible Pump

Motor rotor balansing, Silver brazing, turning & shaft checking etc lathe maching Job work suitable for 200 mm dia submersible Pump

Providing & fixing pump defuser noril

Providing & fixing pump dufuser noril suitable for 100 mm dia submersible Pump

Providing & fixing pump dufuser noril suitable for 150 mm dia submersible Pump

Providing & fixing pump dufuser noril suitable for 200 mm dia submersible Pump

Providing & fixing pump defuser metal

Providing & fixing pump dufuser metal suitable for 100 mm dia submersible Pump

Providing & fixing pump dufuser metal suitable for 150 mm dia submersible Pump

Providing & fixing pump dufuser metal suitable for 200 mm dia submersible Pump

Providing & fixing pump neckring metal

Providing & fixing pump neckring metal suitable for 100 mm dia submersible Pump

Providing & fixing pump neckring metal suitable for 150 mm dia submersible Pump

Providing & fixing pump neckring metal suitable for 200 mm dia submersible Pump

Providing & fixing motor studring

Providing & fixing motor studring suitable for 100 mm dia submersible Pump

Providing & fixing motor studring suitable for 150 mm dia submersible Pump

Providing & fixing motor studring suitable for 200 mm dia submersible Pump

Providing & fixing motorthrust base

Providing & fixing motor thrust base suitable for 100 mm dia submersible Pump

Providing & fixing motor thrust base suitable for 150 mm dia submersible Pump

Providing & fixing motor thrustbase suitable for 200 mm dia submersible Pump

Providing & fixing pump locking stud

Providing & fixing motor stud & nut

Providing & fixing studring locking sirclip

Providing & fixing pump strainer

Providing & fixing pump stages

Providing & fixing pump stages suitable for 100 mm dia submersible Pump

Providing & fixing pump stages suitable for 150 mm dia submersible Pump

Providing & fixing pump stages suitable for 200 mm dia submersible Pump

Providing & fixing cable wire

Providing & fixing 2.5 sq mm x3 core flat submersible cable wire

Providing & fixing 4 sq mm x3 core flat submersible cable wire

Providing & fixing 6 sq mm x3 core flat submersible cable wire

Providing & fixing 10 sq mm x3 core flat submersible cable wire

Providing & fixing 16 sq mm x3 core flat submersible cable wire

Providing & fixing 6 sq mm x 4 core aluminium armored cable

Providing & fixing10 sq mm x 4 core aluminium armored cable

Providing & fixing 25 sq mm x 4 core aluminium armored cable

Providing & fixing 35 sq mm x 3.5 core aluminium armored cable

Providing & fixing 50 sq mm x 3.5 core aluminium armored cable

Providing & fixing 70 sq mm x 3.5 core aluminium armored cable

Providing & fixing 95 sq mm x 3.5 core aluminium armored cable

Removing broken studs with help of welding & re-tapping

Providing & fixing pump distance slvees

Providing & fixing pump distance slvees suitable for 100 mm dia submersible Pump

Providing & fixing pump distance slvees suitable for 150 mm dia submersible Pump

Providing & fixing pump distance slvees suitable for 200 mm dia submersible Pump

Providing & fixing discharge out let

Providing & fixing sandguard

Providing & fixing roter assembly

Providing & fixing roter assembly suitable for 100 mm dia submersible Pump

Providing & fixing roter assembly suitable for 150 mm dia submersible Pump

Providing & fixing roter assembly suitable for 200 mm dia submersible Pump

Providing & fixing pump shaft key

Providing & fixing motor coupling key

Pamp shaft balancing (machine job work)

Providing & fixing Jet / Monoblock pumpset spare part

Providing & fixing pump bush

Providing & fixing pump stud with nut

Motor rotor balansing, Silver brazing, turning & shaft checking etc lathe maching Job work

Pump impeller bronze brazing, turning & cutting etc lathe maching Job work

Providing & fixing pump impeller

Providing & fixing dom nut

Providing & fixing grease cap inner side

Providing & fixing grease cap outer side

Providing & fixing terminal plate with screw

Providing & fixing motor fan Aluminum

Providing & fixing motor fan plastic

Providing & fixing boll bearing 6204

Providing & fixing boll bearing 6205

Providing & fixing boll bearing 6206

Providing & fixing boll bearing 6207

Providing & fixing boll bearing 6208

Providing & fixing boll bearing 6209

Providing & fixing boll bearing 6210

Providing & fixing boll bearing 6211

Providing & fixing boll bearing 6212

Providing & fixing boll bearing 6305

Providing & fixing boll bearing 6306

Providing & fixing boll bearing 6307

Providing & fixing boll bearing 6308

Providing & fixing boll bearing 6309

Providing & fixing boll bearing 6310

Providing & fixing boll bearing 6311

Providing & fixing boll bearing 6312

Providing & fixing boll bearing 6314

Providing & fixing boll bearing 6315

Providing & fixing bearing N 312 ( rollar thrust)

Providing & fixing bearing N 314 ( rollar thrust)

Providing & fixing bearing7312 ( rollar thrust)

Providing & fixing bearing 7316(BECBM)

Providing & fixing bearing 29324 ( rollar thrust)

Providing & fixing bearing 51210 ( rollar thrust)

Providing & fixing bearing 3307 (rollar )

Providing & fixing bearing 7320 (rollar )

Providing & fixing motor fan cover

Removing broken studs with help of welding & re-tapping & new stud fitting

Providing & fixing foot valve assemblysuitable for all type monoblock/ coupled centrifugal pump

Providing & fixing of sparepart for V.T. Motor pump set & V.T. pump repairing

Providing & fixing 38 mm x 3 m long line shaft for vertical turbine pump

Damaged V.T.pump line shaft slot filling by help of welding, turning,shaft balancing, & re-threding on lathe mechine

Providing & fixing G.M.bush bearing for V.T. Motor pump line shaft.

Providing & fixing S.S.coupling for V.T. Motor pump line shaft.

Damaged V.T.pump line shaft spider bush holder slot filling by help of welding, cutting, reaming,on lathe mechine

Providing & fixing rubber centrilizer for V.T.pump line shaft.

bowl assembly opening,servicing, greasing & re-fitting.

Providing & fixing G.M.bush bearing for V.T. Motor pump bowl assembly of the required size.

Providing & fixing Impeller distance sleeve for V.T. Motor pump bowl assembly of the required size.

Damaged bronze Impeller slot filling by brazing & cutting on mechine

Providing & fixing suction housing for V.T. Motor pump bowl assembly of the required size.

Providing & fixing oil seal for V.T. Motor pump bowl assembly of the required size.

Providing & fixing neckring for V.T. Motor pump bowl assembly of the required size.

Providing & fixing Impeller Key for V.T. Motor pump bowl assembly of the required size.

Providing & fixing Impeller for V.T. Motor pump bowl assembly of the required size

Providing & fixing 200 mm dia & 3 m long G.I.pipe for V.T. pump.

Providing & fixing 100 mm dia G.I.Pipe

Providing & fixing 75 mm dia G.I.Pipe

Providing & fixing 50 mm dia G.I.Pipe

Providing & fixing 32 mm dia G.I.Pipe

Providing & fixing 25 mm dia G.I.Pipe

Providing & fixing 100 mm dia G.I.Bend

Providing & fixing 75 mm dia G.I.Bend

Providing & fixing 50 mm dia G.I.Bend

Providing & fixing 32 mm dia G.I.Bend

Providing & fixing 25 mm dia G.I.Bend

Providing & fixing 100 mm dia Flang

Providing & fixing 75 mm dia Flang

Providing & fixing 50 mm dia Flang

Providing & fixing G.I. coupling suitable for 200 mm dia G.I.pipe

Monoblock /coupled centrifugal pump side reparing

Impellers of monoblock /centrifugal pump range from 25 HP to 75 HP, reparing by bronze brezing & cutting on suitable machine.

Providing & fixing Impeller for 20 to 75 HP certrifugal coupled pump.

Providing & fixing rotating assembly,pump shaft for 20 to 75 HP certrifugal coupled pump.

Providing & fixing Impeller neckring for 20 to 75 HP certrifugal coupled pump.

Neck ring of Impellers of monoblock /centrifugal pump reange from 25 HP to 75 HP, reparing cutting to the suitable size on machine.

Pump center distance sleeve repairing, by welding ,boring, cutting, mecking steel bush & Key slot on machine.

Pump shaft repairing, by welding , cutting,turning, balanceing, and mecking key slot & required size on machine.

G.M nut repairing, by welding , cutting,turning, required size on machine.

Pump housing casing body of rotating assembly repairing, by welding , cutting, turning, required size on machine.

Providing & fixing pump housing stud of required size.

Gland packing housing repairing, by welding, boring, cutting,turning,steel bush macking required size on machine.

Bearing cone housing repairing, by welding, silver brazing, cutting turning, threding & nut bolt fitting on machine.

Providing & fixing water seal of required size.

Providing & fixing Gland rope of required size.

Providing & fixing rubber ring for neckring of required size.

Providing & fixing 4 mm thick rubber packing sheet.

Providing & fixing 80 to 250 mm size rubber packing.

Providing & fixing Gland packing rubber O ring.

Gland packing flang repairing, by welding, boring, cutting,turning, required size on machine.

Providing & fixing Rubber spaider bush for pump coupling pully of required size.

Damaged pump coupling pully welding, boring, bush fitting on mechine & making required size.

Dismentling& Replacement old boll valve of size 25 mm with new approved make with labour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 65 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 80 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along with labour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 100 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along with labour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 150 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along with labour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 200 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 250 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 300 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old non return valve of size 400 mm with new approved make D.F non return valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 65mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 80 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along with labour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 100 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along with labour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 150 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 200 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 250 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 300 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Dismentling& Replacement old D.F sluice valve of size 400 mm with new approved make D.F sulice valve with all necessary materials like nut bolt, packing etc.along withlabour charges as directed by Engineer Incharge.

Providing & fixing pressure gauge100 mm dia 0 to 15 Kg.

Providing & fixing 1/2 inch x 2 inch long Nutbolt.

Under repair submersible pumpset of various HP dismenteling from RWSS with labour charages & transporting charges.

0 to 2.5 HP submersible motor pumpset dismenteling charges.

3 to 5 HP submersible motor pumpset dismenteling charges.

6 to 7.5 HP submersible motor pumpset dismenteling charges.

8 to10 HP submersible motor pumpset dismenteling charges.

11 to 15 HP submersible motor pumpset dismenteling charges.

16 to 20 HP submersible motor pumpset dismenteling charges.

21 to30 HP submersible motor pumpset dismenteling charges.

31to 40 HP submersible motor pumpset dismenteling charges.

41to 50 HP submersible motor pumpset dismenteling charges.

Under repair V.T. motorpumpset of various HP dismenteling from RWSS with labour charages & transporting charges.

0 to 15 HP V.T. motor pumpset dismenteling charges.

20 to25 HP V.T motor pumpset dismenteling charges.

26 to 40 HP V.T motor pumpset dismenteling charges.

41 to 80 HP V.T motor pumpset dismenteling charges.

Under repair Monoblock/centrifugal coupled motorpumpset of various HP dismenteling from RWSS with labour charages & transporting charges.

0 to 15 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

6 to 7.5 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

8 to 11 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

12 to 20 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

21to 30 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

31to 40 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

41to 50 HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

51to75HP Monoblock/centrifugal coupled motorpumpset dismenteling charges.

Under repair Eject /jet motor pumpset of various HP dismenteling from RWSS with labour charages & transporting charges.

0 to 3 HP Eject /jet motor pumpset dismenteling charges.

3 to5 HP Eject /jet motor pumpset dismenteling charges.

Under repair Sinko block / open well submersible pumpset of various HP dismenteling from RWSS with labour charages & transporting charges.

0 to 5 HP Sinko block / open well submersible pumpset dismenteling charges.

6to 10 HP Sinko block / open well submersible pumpset dismenteling charges.

11 to 20 HP Sinko block / open well submersible pumpset dismenteling charges.

21 to 30 HP Sinko block / open well submersible pumpset dismenteling charges.

Repaired submersible pump set of various HP Errection charges on RWSS with labour charges transportation & giving test triale

0 to 2.5 HP submersible pumpset Errection charges.

3 to 5 HP submersible pumpset Errection charges.

6 to 7.5 HP submersible pumpset Errection charges.

8 to 10 HP submersible pumpset Errection charges.

11 to 15 HP submersible pumpset Errection charges.

16 to 20 HP submersible pumpset Errection charges.

21 to 30 HP submersible pumpset Errection charges.

31 to 40 HP submersible pumpset Errection charges.

41 to50 HP submersible pumpset Errection charges.

Repaired Vertical turbine pump set of various HP Errection charges on RWSS with labour charges transportation & giving test triale

0 to 15 HP Vertical turbine pump set Errection charges.

20 to 25 HP Vertical turbine pump set Errection charges.

26 to 40 HP Vertical turbine pump set Errection charges.

41 to 80 HP Vertical turbine pump set Errection charges.

Repaired Monoblock/centrifugal coupled motorpump set of various HP Errection charges on RWSS with labour charges transportation & giving test triale

0 to 5 HP Monoblock/centrifugal coupled motorpump set Errection charges.

6 to 7.5 HP Monoblock/centrifugal coupled motorpump set Errection charges.

8 to 11 HP Monoblock/centrifugal coupled motorpump set Errection charges.

12 to 20 HP Monoblock/centrifugal coupled motorpump set Errection charges.

21to 30 HP Monoblock/centrifugal coupled motorpump set Errection charges.

31to 40 HP Monoblock/centrifugal coupled motorpump set Errection charges.

41to 50 HP Monoblock/centrifugal coupled motorpump set Errection charges.

51to 75 HP Monoblock/centrifugal coupled motorpump set Errection charges.

Repaired Eject / jet motorpump set of various HP Errection charges on borewell with labour charges transportation & giving test triale

0 to 3 HP Eject / jet motor pump set Errection charges.

3 to5 HP Eject / jet motor pump set Errection charges.

Repaired sinko block/ open well pump set of various HP Errection charges on RWSS with labour charges transportation & giving test triale

0 to 5 HP sinko block/ open well pump set Errection charges.

6 to 10 HP sinko block/ open well pump set Errection charges.

11to 20 HP sinko block/ open well pump set Errection charges.

21 to 30 HP sinko block/ open well pump set Errection charges.

Water falkulater gear box, falkulater mixer, repairing

Providing & fixing falkulaterpower transmision gear box unit greaves & greves make warm reducer type A -287 modal no-24 with oil filling charges & Errection charges on RWSS with labour charges transportation & giving test triale

Providing & fixing gearbox speed pully

Providing & fixing gearbox oil seal.(frant, back side)

Damaged drive gear-teeth filling by welding & re-teeth cutting on machine.

Damaged lower crown wheel gear -teeth filling by welding & re-teeth cutting on machine.

Damaged Idealar gear -teeth filling by welding & re-teeth cutting on machine.

Damaged gear shaft (lower gear shaft, speed gear bearing housing slot) filling by welding & cutting, truning making required size on machine.

gear box, flash mixer dismatling ftom RWSS side for repairing & after repairing irrecting charges with labour & transportation & giving test & trial.

gear box opening, servicing, greasing, refitting.

providing and fixing of sheet metal work in CRCA sheet with fabrication for panel box

providing and applying two coat of flat oil paint of approved color to the old structural steel work,iorn work prevesly painted

Providing & fixing bearing greas AP-3.

Providing & fixing SAE -10 Oil.

òWelding Works (Valve, Pipe, Bush, Nut bolt, Folkuletar Plate, Joint etc

Sluce Valve Repairing

80mm Sluce Valve Repairing (Gate , body sheet, Threading, Slive brass. Spindal LH threading, reparing, gland bush & Rope etc com.)

100 mm Sluce Valve Repairing (Gate , body sheet, Threading, Slive brass. Spindal LH threading, reparing, gland bush & Rope etc com.)

150 mm Sluce Valve Repairing (Gate , body sheet, Threading, Slive brass. Spindal LH threading, reparing, gland bush & Rope etc com.)

200 mm Sluce Valve Repairing (Gate , body sheet, Threading, Slive brass. Spindal LH threading, reparing, gland bush & Rope etc com.)

250 mm Sluce Valve Repairing (Gate , body sheet, Threading, Slive brass. Spindal LH threading, reparing, gland bush & Rope etc com.)