Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC V P O NAGANPATT TEHSIL DHARAMSHALA DISTT KANGRA HP | DHARAMSHALA | KANGRA | HIMACHAL PRADESH | ₹8.7 L Quoted ₹8.8 L | L1 | Accepted-AOC Due to lowest rate |
| 2 | L2₹8.9 LRejected-Finance VILLAGE DHUNDHIYARA P O BELLI TEHSIL DALHOUSIE DISTT CHAMBA HP | ₹8.9 L | L2 | Rejected-Finance Due to highest rate |
| 3 | L3₹9.0 LRejected-Finance AT GROUND FLOOR MAIN BAZAAR MEHRE TEHSIL BARSAR DISTT HAMIRPUR H P PIN CODE 174305 | HAMIRPUR | HIMACHAL PRADESH | 174305 | ₹9.0 L | L3 | Rejected-Finance Due to highest rate |
| Sl No | Description | Qty | Unit | SIKANDER KUMAR L1 | RAVI KUMAR L3 | ANITA KUMARI L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/KSB/Kirloskar as per BIS : 1520-1980 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to squirrel cage drip proof induction motor of standard make such as Kirloskar/Crompton/NGEF and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments (RPM-2900) | 40 | 2 Set 2x20 = 40 HP | 18,500 ₹7.4 L | 18,900 ₹7.6 L | 18,700 ₹7.5 L |
| 1.01Discharged 3.00 LPS | ||||||
| 1.02Total Head 270 Mtrs. | ||||||
| 1.03Dia of Rising Main = 125mm dia | ||||||
| 1.04Pumping Hours 8 Hours. | ||||||
| 2.00 | Supply of L&T Star Delta Starter, Amp Meter, Singale Phase Prevental, make conforming to BIS 8544-1979 latest with upto date amendments for squirrel cage induction motor (make to be specified by the tenderers) mounted on panel board with magnetic type over load release and gas-pots, time legs, under voltage release & initial oil filing of suitable capacity. | 2 | Nos. | 40,000 ₹80,000 | 42,000 ₹84,000 | 41,000 ₹82,000 |
| 3.00 | Providing and laying copper PVC insulated armoured power cable ( one cable carrying all the three phases) of suitable size and capacity to and all other electrical equipments as per IS: 1554 (P-I)1988 or latest with upto date amendments of Siemens/ IEC/ICC/GICO/Grandly/National make including all other accessories such as thimbles, flexible, pipes solder, nuts and bolts, cable glands etc. laid in pipes or trenches under floor. | 1 | Mtr. | - | - | - |
| 3.01 | 10 Sq.mm 3 Core | 30 | Mtr. | 1,100 ₹33,000 | 1,150 ₹34,500 | 1,100 ₹33,000 |
| 4.00 | Installation of all the items appearing at Serial No. 1 to 5 as per the systematic drawing attached with the tender documents ( Drg.No.1) | 1 | Job | 22,000 ₹22,000 | 23,500 ₹23,500 | 23,000 ₹23,000 |
Tender Value
₹5.2 L
EMD Value
₹10,400
Closing Date
4 Oct 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Shahpur
Providing and fixing centrifugal pumping machinery alongwith accessories (LWSS Balla Sanalla
2025_HPIPH_115620_1
EE/JSDS/NIT/2025-5204-53 dated- 23/09/2025
Open Tender
Civil Works
90 days
Shahpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Executive Engineer
₹10,400
10 Mar 2026
23 Sept 2025
4 Oct 2025
23 Sept 2025
4 Oct 2025
23 Sept 2025
23 Sept 2025 - 4 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid