SPL REPAIR TO BLDG NO P 50 BLOCK OF 10 QTRS AT NAGTALAO UNDER GE BANAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes complete all as specified.

M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in steps, jambs, riser, cooking plateform, oval type WHB counter, sink & etc. machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe complete all as specified.

M&L of 20-25mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including 10mm thick backing coat in CM (1:3) complete all as specified.

M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including M&L 15mm thick screed bed in CM (1:6) complete all as specified.

All as item No. 9.00 above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified.

Taking down cement plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified.

M&L for 10 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement complete all as specified.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified. Note :- WPC will be measured and paid seperately.

M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified.

S&F in repair sheet glass 3.00 mm thick ordinary quailty and glazing with oil putty in square n exc 0.5 Sqm in each pane including hacking down down old glasses.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified.

M&L for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified.

M&L for three coats of white wash including preparation of new surfaces on walls complete all as specified.

M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified.

M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper complete all as specified.

M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any type of surfaces complete all as specified.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each complete all as specified.

Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc 4.0 sqm each complete all as specified.

M& L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

Taking down of window and ventilators of any description complete all as specified.

S&F for 35mm thick flush shutters, solid core construction with block board core and plywood face panels ,commercial type on both side of door, coloured complete all as specified.

S & F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over & including M&L single coat of pink primer complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing complete all as specified.

S &F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size complete all as specified.

S&F 150 mm long aluminium anodised tower bolt complete all as specified.

S&F 150mm long aluminium anodised handle extruded section complete all as specified.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Taking up or down GI steel water tubing 15 mm bore and connection, including cleaning for refixing or remove to site complete all as specified.

Taking up or down GI tubing 20 mm bore and connection, including cleaning for refixing or remove to site complete all as specified.

Supply & Fixing 15mm bore GI Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supply & Fixing 20mm bore GI Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

S&F in repair of bib cock 15mm dia, cast copper alloy fancy type chromium plated, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified.

S&F in repair angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union complete all as specified.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified.

S&F in repair tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as specified.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end complete all as specified.

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete wherever required complete all as specified.

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified.

Dismantaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified.

Dismantaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified.

Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified.

Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified.

S&F in PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to wall/ceiling with MS clamp complete all as specified.

S&F in PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to wall/ceiling with MS clamp complete all as specified.

S&F 75 mm bore PVC bends any radius with oval acess door complete all as specified and as directed.

S&F 110 mm bore PVC bends any radius with oval acess door complete all as specified.

S&F for 100mm dia PVC cowls, diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply and fixing in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed and flush pipe complete all as specified.

S&F Framed work as in doors or gates of angle or other section(confirming to Fe-410 W(Gde-E-250)- quality-A) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

S&F in replacement 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified.

S&F in replacement Kitchen sink without drainage board made of stainless steel 1mm thick with plug, washers and waste Including bedding in cement mortar or Including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm & bowl size 410mm x 330mm x 160mm including brass waste coupling, PVC wastepipe complete all as specified.

M&L 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor , hard standing flooring finished even and smooth without using extra cement complete all as specified.

M&L 50 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished complete including forming joints in 2 mtr interval and filled with bitumen mastic complete all as specified.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified.

M&L for roof treatement in the following stages :-(a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified . (b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer fIlm 20 micron both sides, thickness 1.5 mm having weight 2.25 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm. (e) 40mm thick PCC padding in cement concrete 1:2:4 (12.5 mm graded aggregate finishing even and smooth and cutting V joints @ 120 cm bothways and filling with bitumen 85/25 @1.2 kg/Sqm.

Treatment of sunken portion is as follows:- (i) demolition of lean concrete and other type of filling in sunken portion & cleaned portion incl vertical wall surface complete as directed (ii) M&L for providing 12 mm dia holes of 40 mm deep @2.00 mm c/c at junction of beams and columns as co-ordial points for inserting /pouring cement slurry by pressure grouting for sunken floors of toilet , including sealingthe hole with CM 1:3,all specified and as directed by EIC. (iii)M&L for water proofing for sunken portion in CM 1:3,20 mm thick two coats with water proofing compound at rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement .(WPC to be measured and paid separately) (iv)M&L for apply in evenly two coats of industrial bitumen 85/25 at rate of 1.20kg/sqm (v)A layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer folm 20 micron both sides thickness 3 mm having weight 2.25 Kg/Sqm. (v)M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in filling (sunken portion),etc. (vi)M&L for PCC1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @2% by wt of cement as sub base, 75 mm thick. .(WPC will be measured and paid separately) on top (vii)M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at rate of 2% by weight of cement and finishing the surface even and fair.(WPC will be measured and paid separately)(screed bed to recieve ) Note:a) Test again of water tightness by pounding for 72 hrs & rectify defects if any till total elimination of defect (b) The sunken portion shall be tested for leakage /seepage/dampness by pounding with water for 72 hours . in case of any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical &tested again.The process of grouting and testing shall be repeated till leakage /seepage/dampness is eliminated (c) Horizontal flat area to be measured.

S&F in replacement rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed of capacity 1000 ltrs a Including 20mm bore brass ball valve high pressure with polythene float complete all as directed.

Supply only integral water proofing compound (ISI marked).

Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified.

M&L for 15 mm thick rendering in CM 1:4 on stone masonry finished even and smooth all as specified.(Note-WPC shall be measured separately)

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified.

S&F mild steel 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement complete all as specified.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as specified.

S&F in repair SS Soap Dish complete all as specified.

S&F as in repairs stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample kept in GE's office complete all as specified.

M&L for writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified.

Supply & laying jointing and testing 150mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed and haunching at side in cement, inluding demolition of old existing RCC/SGSW pipe complete all as specified.

M&L for cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork all as specified.

Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each complete all as specified.

Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed by Engg-in-charge for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depth nexc 60 cm complete all as specified.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification complete all as specified.

M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified.

Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails complete all as specified.

S&F 0 degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample complete all as specified.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters complete all as specified.

Material & Labour for stainless steel tray including suitable length slider both side (Grade 304) of required size ,on the top of floor or the side of waist slab with suitable arrangement complete all as specified.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3 complete all as specified.

S&F in replacement PVC SWR gully/floor trap 125/110mm bore, plain with grating including jointing with cement solvent cement complete all as specified.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars complete all as specified.

S&F factory made box type windows (steel) (BWM) with side hung shutter including cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified. Note : (i)-Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii)- Guard bar, Glass panes & wirecloth shall be measured and paid seperately.

All as per item No. 101.00 above but without glazing bars complete all as specified.

S&F in repair of Vitreous China wash basin size 450 x 300mm, white, flat back, including 32 mm CP waste coupling, waste pipe, PVC Connection 450 mm long, brackets complete all as specified.

S&F in relplacement 15 mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F MS chromium plated peg set of five fixing with wall complete all as specified.

Demolition for cement concrete in ground floors and pavings exc 15 cm thickness but above ground level complete all as specified.

M&L for 100 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified.

S&F Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.Office laid over sand filling layer & spreading fine sand over the tiles to fill in the joints & cleaning the same after filling of joints complete all as specified.

M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6 complete all as specified.

All as per item No. 109.00 here-in-above, but as in skirting with 10 mm thick backing coat in cement motar CM 1:4 complete all as specified.

S&F in replacement Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified.

S&F 150 mm single action spring hinge mild steel with steel wire spring-Stove enameled, black complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, lamp holder and conduit etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified. Note:- The damaged surfaces to be made good with plastering & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.

Taking down old DBs ,Sheet metal enclosures (including MCBs) complete, including fixture and fittings removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified. Note:- The damaged surfaces to be made good with plastering & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.

Taking down old light fittings of any type and capacity complete, including fixture and fittings removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified.

Taking down old submain wiring of any type and capacity complete, including fixture and fittings removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified.

Taking down old rusted earthing complete, including fixture and fittings removing materials to store for taking credit complete all as specified.

M&L for concealed point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables confirming to IS-694 and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC conduit (ISI Marked) not less than 20 mm dia heavy duty with accessories etc ,confirming to IS specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified. Note- Quoted Rates is deemed to be inclusive of chasing/cutting & making good of disturbed surface match as per existing.

All as per item No. 117.00 above One fan/ exhaust fan point controlled by one switch.

All as per item No. 117.00 above but One light point controlled by two 2-way switches.

All as per item No. 117.00 above but One switch socket out let point 5 Amps on independent board complete all as specified.

All as per item No. 117.00 above but One bell/buzzar point controlled by one bell push independent complete all as specified.

All as per item No. 117.00 above but One switch socket out let point 5 Amps on same board complete all as specified.

All as per item No. 117.00 here-in-above but with 4 sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified.

Supply and fixing switch piano flush type 5 Amp single pole, one way complete all as specified.

Supply and fixing switch piano flush type 5 Amp single pole, two way complete all as specified.

Supply and fixing for ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified.

Supply and fixing socket outlet 2 in 1 3 pin 6 Amps, flush type complete all as specified.

Supply and fixing switch socket combination multipurpose 5 pin 5/15 Amp flush type, universal complete all as specified.

Supply and fixing Switch-Socket outlet combination 2 in 1 3 pin 6 flush type universal complete all as specified.

Supply and fixing bell/buzzer Ding dong AC 230 Volts single pole complete all as specified.

Supply and fixing lamp holder insulated body with back plate for batten fitting including necessary connection complete all as specified.

Supply and fixing stepped type electronic fan regulator, resistance type complete all as specified.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including PVC casing-N-capping of size 25 to 32 mm width (external) (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc complete all as specified. NOTE: Two runs of 6 Sqmm cable with one run of 6 Sqmm earth wire and PVC casing-N-capping shall be measured & paid for as one length.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including PVC casing-N-capping of size 25 to 32 mm width (external) (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc complete all as specified. NOTE: Two runs of 4 Sqmm cable with one run of 4 Sqmm earth wire and PVC casing-N-capping shall be measured & paid for as one length.

Supply and fixing powder coated sheet metal enclosures MCB DB, double door, single pole and neutral 8 way 240 Volt fitted with bus bar, DIN channel, neutral link and incoming contact and making good disturbed surfaces of walls including plaster cutting of wall etc complete all as specified.

S&F powder coated sheet metal enclosures MCCB VTPN DB, double door, tripple pole and neutral, 4 way 415 volts fitted with insulated vertical phase bus bar/neutral bar of capacity 125 A with shround earth bar cement spill proctector interconnecting wire set cable tiesblanking plates and circuit indentificationlables etc all as per IS-8623-1 IK-09 and making good disturbed surfaces of walls including plaster cutting of wall etc complete all as specified.

Supply and fixing MCB SP 40 Amps 240 volts complete all as specified.

Supply and fixing MCCB 415V,16KA, 4 Pole 100 Amps Adjustable overload setting & fixed magnetic setting, making good disturbed surfaces of walls including plaster cutting of wall etc complete all as specified.

Supply and fixing MCB SPN 32 Amps 240 volts complete all as specified.

Supply and fixing MCB SP 6 Amps to 32 Amps 230 Volt complete all as specified.

S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x22 Watt,(4 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete all as specified.

S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x10 Watt,(2 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete all as specified.

S&F building security light LED fitting 35 watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant , epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 35 watt, fixed / connect properly at directed location on building with IP 65/66 protection complete all as specified.

Supply and fixing bracket for street light fittings of any size made out of GI pipe medium grade 32 mm dia 1.25 mtr length bend to required size and shape including provision of clamps and fittings in position and two coat of aluminum paint over a coat of red oxide primer all as specified and directed including taking down old bracket complete all as specified.

Taking down Old Ceiling fan & deposit to AGE E/M Store and S&F Ceiling fan 1200mm sweep 230V with bushless direct current motor (BLDC) with three blade min air delivery 200CPM with service value 6.00 BEE 5star rating ,down rod , canpoy,nut bolt washer etc with all accessories to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr complete all as specified.

Taking down Old Exhaust fan & deposit to AGE E/M Store S&F Metallic body Exhaust Fan 300 mm sweep, single phase 240 volts AC, 1200 RPM four blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and prepaire suitable hole for exhaust fan complete all as specified.

Taking down old water heater & deposit to AGE E/M Store and Supply,fixed and tested Electric water heater storage type steel body with copper inner tank and heating element upto 2 Kw capacity 25 Ltr BEE 5 Star for 230 volts 50 Hz complete with all accessories such as safety valve ,thermostate,NRV,connection pipe etc complete fixed properly on wall surface with provisioning of suitable size of faster bolts,nuts washer and to connect by using PVC cable complete all as specified.

M & L earthing complete with galvanised steel earth plate electrode 60 x 60x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron strip 32x6mm as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 complete all as specified.

Bhawani Enterprises (BID ID -3389145)

Narender Constrution Company (BID ID -3385148)

MAHARANI CONSTRUCTION COMPANY (BID ID -3391915)

RISING ELECTRICALS (BID ID -3385191)

S AND S Constructions (BID ID -3384989)