Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance ANANTNAG ANANTNAG JAMMU AND KASHMIR | ANANTNAG | JAMMU AND KASHMIR | 192101 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹8.8 L
Closing Date
20 Dec 2021, 6:00 pmClosed
PEK
Sanat Ghar Bemina
Repair renovation of common Facility Centre building including walling at Sumbal Bandipora Handicrafts and Handloom Department
2021_SICOP_150948_1
17a-PEK of 2021 DATED 01-12.2021
Open Tender
Civil Works
Item Rate
30 days
Sumbal Bandipora
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
PEK
Exempted
13 Jan 2022
1 Dec 2021
21 Dec 2021
1 Dec 2021
20 Dec 2021
1 Dec 2021
Amount
Earthwork excavation by mechanical means(Hydraulic excavation) over areas (exceeding 30cm in depth, 1.5mtrs in width, and 10sqm on plan)including disposal of excavated earth lead upto 50 mtrs and lift upto 1.50 mtr disposal earth to leveled and neatly dressed.
Providing and laying of stone soling tightly hand packed under foundation & under floors including all leads lifts and all carriages upto site of work complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:4:8 mix (1 Cement :4 coarse sand :8 graded stone agg.40mm Normal Size) using crushed agg. Including all leads, lists and all carriages. Upto site of work complete
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 mix (1 Cement :3 coarse sand :6 graded stone agg.20mm Normal Size) using crushed agg. Including all leads, lists and all carriages. Upto site of work complete
Formwork of ordinary timber planks so as to give rough finish including removal of the same in foundation and plinth.
Cement concrete flooring 50 mm thick in 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20mm nominal size -crushed) finished with a floating coat of neat cement incl. cement slurry, but excl. the cost of nosing of steps etc. Including all carriages up to site of work complete
P/F paneled or paneled and glazed shutters for doors, windows and clerestory windows including ISI marked black enameled M.S pressed butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge (1st class imported kail wood) 35mm thick incl. 3.5mm thick glass panes o cost of hardware fittings complete job.
P/F 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows and clerestory windows including ISI marked M.S pressed but hinges bright finished of required size with necessary screws of 1st class Kail wood
Providing and fixing of laminated door shutters of approved brand including all hardware fittings complete job.
Providing and fixing of 40mm thick budloo wood Planks of approved brand and manufacture in walls, ceiling & partitions etc include cost of wooden frame work of 1st class budloo wood (2”x1’ ½ “) and nails scaffolding charges with carriage of material upto site of work complete.
Providing and fixing of Electrifications: - a) Wiring for lighting point/exhaust fan point with 1.5 sqmm copper conductor including cost of switch modular board complete job as required.
b) Wiring for heating point with 2x2.5 sqmm copper conductor including cost of 16amp switch and socket complete as required.
Painting with synthetic enamel paint of approve brand and manufacture to give an even shade two or more coats including with ready mixed of approved brand and including priming coat complete in all respects.
P/F white vitreous china pedestal type water closet (European type W.C pan) with seat and lid 10 litre low level white P.V.C flushing cistern incld flushing pipe with manually controlled device (Handle lever) conforming to IS: 7231 with all fittings C.I/M.S brackets 40mm diameter flush bend with fittings and fixtures complete incld cutting and making good the walls and floors wherever required (W.C pan with ISI marked white solid plastic seat and lid) (Cera/ Hindware make).
Providing and fixing of CP Fittings (Jaguar) a) Wall Mixer 15mm
b) Bib cock 15mm
c) Geyser 50 ltr Venus make
d) Angle value 15mm
Structure steel work welded in built up section for construction of gate and framed work including cutting hoisting fixing in position and applying priming coat with approved steel primer
Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor 2 level in cement mortar 1:6 mix (1 cement :6 fine sand) including cost of all carriages mechanically / manually complete job.
Providing and laying of reinforced cement concrete of specified grade excluding the cost of centering and shuttering all work upto floor V-level in 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg.20mm normal size) using crushed agg. Including all carriages upto site of work complete
Steel reinforcement for RCC work including straightening, cutting, bending, binding and placing in position complete.
P/L of vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 ( 1 cement : 4coarse sand) incld grouting the joints with white cement and matching pigments etc complete size of tile 60x60 cm
M/S BILAL AHMAD WANI
FAYAZ AHMAD SHEIKH
SOFI MUBASHER HUSSAIN
MALIK AND SONS
GHULAM HASSAN WAGAY
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .