CONSTRUCTION OF CR (RADIAL) CUM VRB @ Ch. 18320 M OF KOSAMBA BRANCH CANAL

Name of Work :-

Sr. No. Qty. Unit. Description of Items. Rate Per Amount

1 Jungle cutting for preliminary surveys

329.35 m2 (a) Light jungle cutting (bushes, hedges ) 13.44 m2

Dismentalling the existing brick masonry including sorting out

and stacking the useful materials and removing the debries

and making good the damage etc. complete as directed.(b) In

Dismentalling the existing foundation concrete including

disposing the dismentalled stuff including sorting out and

3 1261.88 m3 stacking the useful materials and removing the debries and 1310.8 m3

making good the damage etc. complete as directed.(c) R.C.C

for super structure.

Excavation of canal/drains in all sorts of soils (including wet

and slushy condition of soil) including depositing the

excavated stuff in uniform layers in canal/Drain banks or in

4 2547.49 m3 spoil banks or as and where directed including dressing the 72.00 m3

canal/drain section upto lead of 1.0 K.M. and all lift including

clearing the site etc. complete. (By machinery for canal/drain

maintanance ) above 1.5 cumecs capacity.

Providing and laying Non Woven GeoFabric Filter over the

excavated surface as per specification including stitching with

overlap to design profile as directed in tidal range etc.

Providing and laying 300 mm thick pucca rubble pitching in

cement mortar 1:5 proportion with the surface pointed with

cement mortar of 1:3 proportion including curing etc.

complete for all leads & lifts

Providing and laying plain/ reinforced Design Mix cement

concrete of various grade with cement, sand and coarse

aggregates including centering, shuttering, batching, mixing,

transporting, placing, vibrating, smooth finishing, curing etc.

complete for all lead and lift.(Batching Plant Based, Including

1.99 m3 (ii) M-10 grade. 3836 m3

(B) Raft, Bottom slab of barrel, footing of columns,piers,

abutment and bottom slab of sump etc.

(C) Raft, Bottom slab of barrel, footing of columns,piers,

abutment and bottom slab of sump etc.

(D) Walls of barrels,brestwall,staunchingrings,pedestals of

bearing, stoplog piers,well staining, transition wall, etc.

(E)Roadway slab, approach slab, chute floor slab,kerb,

pier cap, abutment cap, hoisting platform,top slab of

33.07 m3 (iii) M-25 grade 5206.3 m3

(F) Walls of barrels,brestwall,staunchingrings,pedestals of

bearing, stoplog piers,well staining, transition wall, etc.

Providing and placing in position reinforcement bars

8 including cutting, bending welding, joints where necessary,

hooking etc. complete as per drawing for all lead and lifts.

524.21 Qtl. (A) TMT 7194 Qtl.

Providing and fixing in position PVC heavy duty water stops

in barrels, trough, and wing wall with 25 mm wide expension

joint as shown in drawing including filling the joints with

asphalt pad or bitumins or cork board of approved quality.

209.38 m (A) 225mm wide PVC water stop. 384.9 m

Providing and filling the polysulphide joint selent of the

10 231.48 m approved make in the expansion and contraction joints in the 533 m

c.c. lining including clearing the joints with air water jet.

Providing and fixing in position 110 mm dia PVC pipe weep

11 30.6 m holes in abutment, wing wall, and laying training etc. 263.7 m

Earthwork in embankment using soil, soft & hard murrum

excavated from approved borrow area/village tanks

12 893.96 m3 etc.including breaking clods, dressing to the design section 118.10 m3

with lead up to 5.0 kilometer and all lifts. (By Poclane

Providing & fixing in position sign board of standard size of

1.20mx0.90m with M.S angle 40mmx40mmx6mm with 3mm

13 1 No. thick iron plate including fixing in 1:5:10 prop. Concrete 3011.3 No.

block size 40cmx40cmx75 cm including painting existing data

on the board etc. complete as directed.

Providing and laying dry rubble pitching of various thickness

to required grade including trimming of earth work , hand

packing the interstices with spauls, filling earth in interstices

panneling complete for all leads and lifts (a) 300mm thick.

Providing gauge plate of following size of material fibre glass

reinforced plastic with engraved bands width and figures with

15 1 No. necessary clits and fastenersand fixing the same at the site of 14786.6 No.

work etc complete asdirected

For 0.60 mt. x 1.0 mt. gauge patti

Providing videography on the occasion of function or for

16 1 4 Hrs. ongoing construction work including dubbing, titling 1230.51 4 Hrs.

etc.complete including cost of cassate/CD. (b) up to 4.0 hours

Providing and laying plain/reinforced cement concrete lining

of M-15 grade in bed,side slopes and curvature including

batching,mixing,transporting placing,smooth finishing,curing

including dewatering where required.(machinery based

without Paver).

(b) 10 Cm thick lining in Bed & Slope

Providing, Fabricating & erecting of new embedded parts like

wall plate assemblies, sill beam etc. complete including

Labour, Tools & tackles, Scaffoldings, Safety equipment etc as

18 1 Gate per drawing, Specification & Instruction of Engineer In charge 120136 Gate

for C.R. radial Gate (Size:3.65 Mtr. X 2.10 Meter- 1 Nos. ) as

per drawing, specification and instruction of engineer

incharge at chainage 18320Meter of Kosamba Branch Canal

Providing, Fabricating & erecting of new gateleaf assembly

including Labour, Tools & tackles, Scaffoldings, Safety

equipment etc as per drawing, Specification & Instruction of

19 1 Gate Engineer In charge for C.R. radial Gate (Size:3.65 Mtr. X 2.10 310281 Gate

Meter- 1 Nos. ) as per drawing, specification and instruction

of engineer incharge at chainage 18320Meter of Kosamba

Providing, Fabricating & Erecting of new arm assembliy,

Trunnion assembly, Anchor Girder etc. complete including

Labour, Tools & tackles, Scaffoldings, Safety equipment etc as

20 2 Set per drawing, Specification & Instruction of Engineer In charge 160015 Set

for C.R. radial Gate (Size:3.65 Mtr. X 2.10 Meter- 1 Nos. ) as

per drawing, specification and instruction of engineer

incharge at chainage 18320Meter of Kosamba Branch Canal

Providing, Fabricating & erecting of new hoist platform

assembly including Labour, Tools & tackles, Scaffoldings,

Safety equipment etc as per drawing, Specification &

21 1 Gate Instruction of Engineer In charge forC.R. radial Gate (Size:3.65 218697 Gate

Mtr. X 2.10 Meter- 1 Nos. ) as per drawing, specification and

instruction of engineer incharge at chainage 18320Meter of

Kosamba Branch Canal

Manufacturing, Providing & Erecting of new 2 T Capacity rope

drum type hoist including Labour, Tools & tackles,

Scaffoldings, Safety equipment etc as per drawing,

22 1 Gate Specification & Instruction of Engineer In charge forC.R. radial 169639 Gate

Gate (Size:3.65 Mtr. X 2.10 Meter- 1 Nos. ) as per drawing,

specification and instruction of engineer incharge at chainage

18320Meter of Kosamba Branch Canal

Deputy Executive Engineer Executive Engineer

Ilav Distry Sub Division U.R.B.C. Inv. Division

Ilav Ankleshwar