Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹5.4 Laccepted-aoc | accepted-aoc |
Tender Value
₹8.5 L
EMD Value
₹21,200
Closing Date
10 Sept 2026, 5:00 pmClosed
Karnataka Power Corporation Limited
Ravi Ilager
Providing rest room to contractor female workers working around auxiliary buildings near Time office and improvement works to steel silo at RTPS
KPCL/2026-27/OW/WORK_INDENT4638
KPCL/2026-27/OW/WORK_INDENT4638
Open
Other Works
Two Tender Document System(Two Cover)
KPCL Executive Engineer PCM1 Office RTPS Raichur
Any reputed individual/Company having valid KPWD contractor registration certificate of Class IV & above are eligible for participation for which scanned copy of the same shall be uploaded.
The bidder should upload the scan copy of Income tax PAN
The bidder should upload the scanned copy of Independent PF
The bidder should upload the scan copy of valid GST registration certificate.
The Bidders should upload the following declarations duly signed . I/we shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by KPCL/KPWD or by any State Government/Government of India/ Union Territory. II. I/we declares that EMD has not been forfeited and None of my contracts have been terminated/foreclosed on account of default in KPCL/KPWD or elsewhere during the past 3 (Three) years. III. My/our offer has no conditions contravening the commercial conditions of the bid. IV. I/we have studied the site conditions, labour conditions and read the Bid documents and related matters carefully and diligently and that he has submitted the bid having studied understood and accepted the full implications of the agreement. V. I/we shall pay fair and prevailing wages, which shall not be less than the minimum wages fixed by GOK to the labours/workmen employed in the contract. VI. I/we have accepted the condition that KPCL reserves the right to foreclose the contract at any point of time without assigning any reason.
Not applicable
Not applicable
Not applicable
Not applicable.
Not applicable.
Not applicable.
Not applicable.
₹500
₹21,200
10 Sept 2026
27 Aug 2026
11 Sept 2026
7 Sept 2026
Providing rest room to contractor female workers working around auxiliary buildings near Time office and improvement works to steel silo at RTPS
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disp...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Providing rubble and Pond Ash/flyash filling in layers of 250 to 300 mm including cost of all materials, machinery, labour, watering, ramming etc., with all lead and lift. (Pond Ash/Bottom Ash will b...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal ...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as pe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing Brick work with clay flyash Non Modular brick of class designation 3.5 in superstructure above plinth level up to floor I level in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Providing and laying vitrified floor tiles 600x600 mmwith thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing Brass full way valve gate with C.I. wheel ofapproved quality (screwed end) : 25 mm nominal bore
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing ,supplying, lowering, laying jointing ,testing and commissioning factory-made from high-grade polyethylene(PE) or Linear low density polyethylene (LLDPE) septic tank including machine hole...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Three Way 5 Pin Socket Make : L&T/Legrend/ Schneider/ CGL / Havells/Anchor.)
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using ...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply (12" Sweep (300 mm) Make :Havells/Crompton/V-Guard
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying & fixing retrofit type-PL- LED Lamp . W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 :400Watts Dimmer.(Make: Anchor/Legrand/Havells/GM modular.)
Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.(16 - 32 A TP)
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff (2.5 to 25 Sqmm)
Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) (2.5 to 25 Sqmm (Single/3.5/4 Core)
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Declaration new.docx
Others - The Bidders should upload the declarations by duly signed • 0.02 MB
Bid Document.docx
Tender Document • 16.62 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .