Repair/replacement of window grill, steps, tiles, floor and wall tiles, roof covering and renovation of kitchen at Zone-1 and Zone-5 Offrs Md accn under GE (S) Tezpur

Amount

Taking down chowkats or frames not exc 1.5 Sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.Complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete including taking down old one all as specified and as directed

Dismantling aluminum window with shutter incl aluminum/iron mongries complete all as specified and as directed.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete shall as specified etc complete all as specified and as directed

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete complete all as specified Note Glass and wire mesh shall be measured and paid separately under respective items.

S&F 4 mm thick tinted glass as in window shutters all as specified and directed by Engr-in-Charge

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters all as specified and directed by Engr-in-Charge

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.Complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub base/floor etc complete all as specifed and as directed.

M&L Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

All as per item No 82 above but in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

M&L Vitrified steps stone 9 to 10 mm thick 1200 x 300 mm including riser of 150 mm height light or dark shade, polished, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M/L Granite (of any type) tiles 18-20 mm thick machine cut (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L 18-20 mm thick Granite (of any type) tiles machine cut (table rubbed and polished), in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4 including grinding the edges half round and polishing including etc complete all as specified and directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

Material and labour for (old size bricks)brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar ( 1:6) all as specified and directed.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) all as specified and directed.

Demolition of reinforced cement concrete in reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position

M&L for RCC M-25 (Design Mix) (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like.Complete all as specified and as directed.

S&F mild steel TMT bar 8 to 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Use & Waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs,self, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).Complete all as specified and as directed.

S&F Solid PVC moulded frame of size 50mm x 90 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification.Complete all as specified and as directed.

S&F 100 mm thick butt hinges, stainless steel and fixed etc complete all as specified and as directed

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.Complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.Complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.Complete all as specified and as directed.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.Complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.Complete all as specified and as directed.

Supply & fixing of pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with 0.5mm thick of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws.Complete all as specified and as directed.

All as per item No. 36 above but plain sheet for ridge ,gutter etc fixed with self tapping screws as specified.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 38 here in before but 20 mm bore.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 40 here in before but 20 mm bore.

Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc.Complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately).Complete all as specified and as directed.

M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.Complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only water proofing compound. Conforming to IS -2645.Complete all as specified and as directed.

M&L preparation of newely plaster surfaces of wall and appplying two coats of weather coat by smart painting method over a coat of damp proof primer to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L Applying two coats of acrylic emulsion distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm thick layer of wall care putty over a coat of wall primer including preparation of newly platsered wall all as specefied and directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed. Nirali /Anjali/Prayag/Bluestar

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. Make - Nirali /Anjali/Prayag.

S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed. Make:Jaguar,Marc or equivalent.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

M&L 12 mm thick prelam Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face, fixed with screws to timber frame work (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) including taking down old onecomplete all as specified.

M&L 19 mm thick prelam Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face, fixed with screws to timber frame work (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) including taking down old onecomplete all as specified.

S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as directed by Engr-in-charge.

S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black all as specified.

S&F Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size all as specified.

S&F SS304 box type Cargo cutlery basket with width 436 mm, depth 500 mm and height 94mm fixed in kitchen cabinet complete all as specified.

S&F OrgaTray 570 - 500mm Depth, 900mm Width for 94 mm drawer side profile height set includes variable dividers for organising drawer in any way plastic silver, dividing elements, anthracite fixed in kitchen cabinet complete all as specified.

S&F CargoTech M Stainless Steel Wire Basket (Thali/Jar Basket) size 536 mm (W) x 500 mm (D) x 200 mm (H) ,Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified.

S&F CargoTech M Stainless Steel Wire Basket (Plain) size 436 mm (W) x 500 mm (D) x 150 mm (H),Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified.

S&F Stainless Steel, Chrome plated Bottle Pullout Carcase width 300 mm fixed both layers with acrylic plastic sheet makes it visually appealing and sturdyin kitchen cabinet complete all as specified.

Supply and fix, in repairs 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls with access door all as specified and directed.

S&F PVC (SWR) 75 mm dia bends any radius with access door all as specified and directed.

S&F PVC (SWR) branch75 mm bore pieces, single ( single Y ) equal or unequal with access door all as specified and directed.

S&F PVC (SWR) junction75 mm bore single ( single t) equal or unequal with access door all as specified and directed.

M&L for 75 mm dia of outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Chinmay Traders

M/S KAUSHICK CONSTRUCTION

M/S MOHANPASARI