Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance PLOT NO 1076 BEHERA SAHI NAYAPALLI BHUBANESWAR 751012 | KHORDHA | ODISHA | 751012 | Admitted-Finance |
Tender Value
₹7.1 L
EMD Value
₹14,184
Closing Date
8 Aug 2022, 3:00 pmClosed
DIRECTOR NISER
NISER, Jatni
Cable laying from LCS-5 to SPS building with cable termination, testing and 30KVA UPS point installation and UPS wiring in the CMS Lab of SPS building
2022_NISER_703081_1
NISER/IWD-ELECT/SPS/22-23/06
Open Tender
Electrical Works
Works
30 days
NISER, Jatni
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹14,184
Yes
23 Aug 2022
26 Jul 2022
9 Aug 2022
27 Jul 2022
8 Aug 2022
27 Jul 2022
Supply, Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench with sand and bricks etc as required. (To be laid from LCS-5 to SPS building) 3.5Cx300 Sq MM AL Armoured XLPE Cable Make: Polycab/Finolex/RR Kabel
Supplying and making end termination with double compression gland and tinned copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 300 sq. mm (70mm) for 3.5Cx240 sqmm AL XLPE Armoured Cable
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door Make: Legrand/Hager/Schnieder
Supply and fixing of 63 Amp rating, four pole 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple Pole MCB Make: Legrand/Hager/Schnieder
Supplying of 32 Amp rating, three pole 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing an commissioning etc. as required. Triple Pole MCB Make: Legrand/Hager/Schnieder
Supplying of 25 Amp rating, single pole 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole MCB Make: Legrand/Hager/Schnieder
Supplying and fixing of 4 pole Steel Enclosure along with 63 amp 4 pole MCB, rating, 240/415 V, 10 kA, "C" curve on wall surface or concealed as required. Make: Legrand/Hager/Schnieder
Supply, Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 3.5Cx25 Sq MM AL Armoured XLPE Cable Make: Polycab/Finolex/RR Kabel
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5Cx25 sqmm AL XLPE Armoured Cable
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Make: Polycab/Universal/Finolex/RR
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required for UPS and Insrtument Earthing.
M/S TATHAGATA ENGINEERING
KISLAY KUMAR
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .