Kerala

Active

Works

Civil Works - Buildings

Annual Plan-Annual Plan Chalissery GP 2026- 27, Pro no 88 Anganavadi-Rennovation- General Civil Work

Local Self Government Department

WORK | Kerala

Amount: ₹5.2 LCloses: 14 Oct 20269 Oct 2026Due today

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published1 Oct 2026
Closes14 Oct 20269 Oct 2026
Bid Opening16 Oct 202612 Oct 2026

Corrigenda

Corrigendum

1 updatesLatest on 8 Oct 2026Submission Ends:9 Oct 202614 Oct 2026

Date changes

Download Ends9 Oct 202614 Oct 2026Submission Ends9 Oct 202614 Oct 2026Bid Opening12 Oct 202616 Oct 2026

Tender Value

₹5.2 L

EMD Value

₹13,121

Closing Date

14 Oct 2026, 5:00 pmDue today

Tender Inviting Organisation

Name

Address

LIDEW

Work Description

Annual Plan-Annual Plan Chalissery GP 2026- 27, Pro no 88 Anganavadi-Rennovation- General Civil Work

Tender Information

Tender ID

2026_LSGD_874933_1

Reference Number

009/2026/AE/LIDEW/CHY PHASE

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

WORK

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical/Finance

RequiredTENDER SCHEDULE (BOQ) (.xls)

RequiredSCANNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredSCANNED COPY OF E - PAYMENT FORM,AADHAR CARD,LICENSE,GST REGISTRATION,PANCARD (.pdf)

RequiredSCANNED COPY OF AFFIDAVIT (.pdf)

RequiredSCANNED COPY OF FORM OF TENDER (.pdf)

RequiredTENDER SCHEDULE (BOQ) (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,160

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹13,121

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

14 Oct 2026

Published

1 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

1 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

1 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (31 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Anganwadi no 96 Alikkara
1.001	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.77	cum	-	-
1.002	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	101.91	sqm	-	-
1.003	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	101.91	sqm	-	-
1.004	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	101.91	sqm	-	-
1.005	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	2.52	sqm	-	-
1.006	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	374.4	kg	-	-
1.007	4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts	2	sqm	-	-
1.008	4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.13	cum	-	-
1.009	OD177403/2026-2027:51.20. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required	72	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.08 MB

Tendernotice_2.pdf

PDF • 0.03 MB

Tendernotice_3.pdf

PDF • 0.03 MB

Work Item Documents

PA.pdf

Tender Documents • 0.04 MB

viewsbd.pdf

Tender Documents • 4.11 MB

FOT.pdf

Tender Documents • 0.03 MB

AFF.pdf

Tender Documents • 0.03 MB

BOQ_1485234.xls

BOQ • 0.32 MB

Corrigendum Documents

CORR_20261008_0001.pdf

PDF • 0.70 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Anganwadi no 96 Alikkara
1.001	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.77	cum	-	-
1.002	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	101.91	sqm	-	-
1.003	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	101.91	sqm	-	-
1.004	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	101.91	sqm	-	-
1.005	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	2.52	sqm	-	-
1.006	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	374.4	kg	-	-
1.007	4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts	2	sqm	-	-
1.008	4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.13	cum	-	-
1.009	OD177403/2026-2027:51.20. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required	72	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Anganwadi no 96 Alikkara

1.001

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

0.77

cum

1.002

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

101.91

sqm

1.003

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

101.91

sqm

1.004

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

101.91

sqm

1.005

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

2.52

sqm

1.006

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

374.4

1.007

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

sqm

1.008

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.13

cum

1.009

OD177403/2026-2027:51.20. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required

sqm