REPAIR TO MES INSTALLATION BUILDING IN PKT 5 TO 8 IN AGE B R III UNDER GE ROORKEE AND REPAIR CLEANING LAYING TO SEWAGE LINES MANHOLES SEPTIC TANKS AND LIFT WELL CLEANING AND REPAIR MAINT OF PUMPS AND PANELS INSTALLED AT SEWAGE LIFT WELL ETC IN POCKE

Amount

Demolition of Brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

M & L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M & L for brick work in CM 1:4 using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete all as specified and directed .

Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc(each layer) laid bedded and pointed in any mortar etc complete all as specified and directed.

Forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

Add or deduct from item No. 5.00 for forming fair finished channels or drains for each 25 mm girth or part thereof or drains for each 25mm girth or part thereof over or under 30cm Note: - This term is only for adjustment of rate if applicable.

Demolition of cement concrete (un-reinforced) of any description and laid in any position complete all as specified and directed.

M&L 75mm thick Cement concrete type B- 2, 1:4:8 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm thick screed bed and Dismantling floor, hearth or wall tiling including complete all as specified and directed. Make:- NTC/NITCO.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 and dismantling floor, hearth or wall tiling including complete all as specified and directed.

M & L for glazed ceramic colour joint free tiles in vertical surface size 450X 350X 7 mm/ 450x 300 x7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 and dismantling floor, hearth or wall tiling including complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 and dismantling floor, hearth or wall tiling including complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc.

M & L for providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for providing 15 mm thick rendering with cement mortar 1 : 4 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 15 mm thick rendering in 1:4 CM stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for applying 2 coats of white wash including preparation of new plaster surfaces on wall complete all as specified and directed

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of Appex wall care putty as directed. Make : Asian Paint/Berger.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified and directed.

M & L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required and including taking down complete all as specified complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH.

M & L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH.

Fixing only GI water tubing of bore 20 mm with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed

Fixing only GI water tubing of bore 15 mm with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed

Dismantling of water tanks 500 ltrs of capacity and removing to store complete all as specified and directed.

M&L 500 ltrs Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- prayag) hoisted and fixed in position all as specified in SSR Part I.

S&F /in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 mm - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S & F in repairs of 15 mm bore size CP bib tap complete all as specified and directed. (Make : Prayag/ Polytuf/Symat).

S&F In repair 15mm bore bib tap, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S&F in repair 15mm dia Stop/ angle valve of CP any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms)

S&F in repair 20mm dia Stop valve of CP any colour high pressure screwed for iron pipe and fixed. (Minimum weight 20mm-90gms/ 20mm- 92gms)

S&F in repair 15mm dia Pillar taps of CP any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)

S & F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (MODEL : 88910 Make : Prayag, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON).

S & F in repairs 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly or push button type handle as required, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440mm with integral foot rest including 'P' or 'S' complete and all as specified and directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S&F in repair PVC seat cover for wash down water closet ( Pedestal Pattern ) with mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S & F in repairs 10 ltrs PVC (White) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S & F plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.(Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S & F in repairs vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding tap) but including Waste coupling, waste pipe, porcelain stopper and a pair of MS bracket etc complete all as specified and directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

Ditto all as per BOQ item No. 41.00 but with pedestal and any colour as approved complete all as specified and as directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S&F in repair 100mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete Type B-1(1:2:4) complete all specified and directed.

S&F 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed(Model : 8903 Make : Prayag OR EQUIVALENT RANGE OF Jaquar, JOHNSON).

S&F in repair vitreous china urinal, half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed. (Make : Premium quality of Cera/Hindware/ Parryware /HR Johnson).

S&F in repair Grating round 100mm dia of CP complete all as specified and directed.

S&F in repair 125 mm size brass CP shower rose with or without joints including fixing to steel pipe or union complete all as specified.

S&F Health faucet including CP connector and fixing arrangement complete.

Supply and fixing of 750 mm long PVC waste pipe suitable for 32 to 40 mm size waste coupling.

S&F in repairs 32 mm bore waste coupling PTMT half or full threaded complete and all as specified and directed

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete (Make:- Nirali and equivalent).

S & F in repairs PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed .

S & F 2nd class hard wood plain solid, straight chowkhat and frame rebated on the solid rounded or chamfered put together with glue pinned at point complete all as specified and directed .

S & F 30 mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhat complete all as specified and directed .

M&L for mild steel TMT bars 10 mm dia and over , cut to length bent to shape required incl necessary cranking, bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L for mild steel TMT bars 6 to 8mm dia and over , cut to length bent to shape required incl necessary cranking, bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

S & F 250 mm MS sliding door bolts, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhat at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S & F Mild steel barrel tower bolts, stove enameled black with bright bolts and fixed 150mm long bolts ,fixed in repair complete all as specified and directed.

S & F MS pressed handles oval type stove enameled black, 150 mm size as in repair complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, water proof/ weather proof type on both sides complete all as specified and directed.

S & F in repairs 250 mm MS sliding door bolts, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repairs mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhat at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S & F in repairs Mild steel barrel tower bolts, stove enameled black with bright bolts and fixed 150mm long bolts ,fixed in repair complete all as specified and directed.

S & F in repairs MS pressed handles oval type stove enameled black, 150 mm size as in repair complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed . Make : Rajshree / Syntax.

S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. Make : Rajshree / Syntex.

S&F PTMT butt hinges 100 mm Make : PRAYAG / POLYTUF

S&F PTMT Tower Bolt 150 mm Make : PRAYAG / POLYTUF

S&F PTMT door handles 125 mm Make : PRAYAG / POLYTUF

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed .

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed.

S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs galvanised MS, wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack/galvanised wire staple complete all as specified and directed.

M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over framed work in section, in any position complete.

M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Taking down ( AC corrugated sheet) as specified complete all as spfd & directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Taking down as specified complete all as spfd & directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n exc 2.50 Sqm and joints filled with mastic filling complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed (Make:- NTC/NITCO) .

M&L cement concrete TypeB0 1:2:4 (12.5mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including taking down complete all as specified and directed. Make : Prince or equivalent.

S & F in repairs PVC (SWR) 'T' 110 mm complete all as specified and directed. Make : Prince or equivalent.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed natural ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed in Concrete, brick work, masonry, etc ground

Dismantling Barbed wire any description complete all as specified and directed

Excavating in post holes in hard/dense soil each n. exc. 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering & removing surplus soil to a distance N.exc 50 m and making good surface .

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165)complete all as specified as directed. (Make - TATA STEEL / SAIL / TISCO)

Dismantling fencing wire mesh of any type and of any description complete all as specified and directed.

Supply only Chain link MS galvanisd fencing any size any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing & straining and fixed to any type of standard rail incl securing or tying at crossing with and provision of galvanised MS wire staple or steel pins complete all as specified and directed by Engr- In - Charge complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Taking down rain water pipes (any size or pattern including all fittings heads, shoes, bends etc and removal complete and all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete and all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete and all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete and all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings jointslaid in trenches or in floors complete and all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequa complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequa complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in CM (1:3) finished even and smooth w/o using extra cement and using waterproofing compound on fair faces of brick work or concrete surfaces complete all as specified and directed. NOTE: WPC will be measured and paid for separately.)

M&L Epoxy coating (1) Clean the surface free from dust, loose material etc. (2) If required provide & fix 12mm dia. GI Nozzle @1.5 mt. c/c on the entire area of the sunken portions. Apply chemical injection grouting through the nozzles with cement slurry admixture with DURA EV (Non shrink Polymeric grouting compound) with 40 PSI Pressure pump. Seal off the nozzle and cutting the same after the grout has set. (3)Make Angular fillets or Gola with cement sand mortar (1:3) admixed with diluted DURAKRIT (1 Durakrit: 3 Water) at the junctions of the wall. (4) Wet the surface with water to make it SSD condition. (5) Apply one coat of DURAKRIT- Acrylic Polymer Modified Cementatious…(PMC) slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight on the sunken floor surface; turned up and finished up to 100mm from FFL. (6) Apply second coat of DURAKRIT - Acrylic Polymer Modified Cementatious slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight over the first coat at right angles. The second coat is usually applied after first layer slurry coat has touch dried usually after 4 hrs. (7) Ponding Test for water leakage will be carried out as per IS 3370 part 1 for seven days as instructed.

M&L for Bituminous water proofing treatment by applying bitumen coat @ 3 Kg per Sqm for receiving APP Membrane complete all as directed by Engr-in-Charge

M&L for laying APP membrane of 3.5 Kg Per Sqm including overlapping and sealing complete all as specified and directed

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foundation, sub base of floor and mass concrete complete all as specified and directed.

M & L for cleaning of blocked/chocked CI pipe line of 100 mm dia from WC to gully trap, manhole or from cleaning eyes in any depth by Roding or by mechanical means and well flushing the complete line including removing of sludge /waste to low lying areas within 200 m distance and burring the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers duly set in cement mortar 1 : 4 as wherever required complete all as specified and directed.

M & L for cleaning of blocked/chocked CI pipe line of 150 mm dia from WC to gully trap, manhole or from cleaning eyes in any depth by roding or by mechanical means and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burring the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers duly set in cement mortar 1 : 4 as wherever required complete all as specified and directed.

M & L for cleaning of blocked/chocked CI pipe line of 150 mm dia sewage line (exc 1.5 m and n.exc 3.00 m in depth from top of manholes to bottom of pipe line) by roding or by mechanical means and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burring the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers duly set in cement mortar 1 : 4 as wherever required complete all as specified and directed.

M & L for cleaning of blocked/chocked CI pipe line of 200 mm dia sewage line (exc 1.5 m and n.exc 3.00 m in depth from top of manholes to bottom of pipe line) by roding or by mechanical means and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burring the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers duly set in cement mortar 1 : 4 as wherever required complete all as specified and directed.

M & L for cleaning of blocked/chocked CI pipe line of 200 mm dia sewage line (exc.3 m and n.exc 4.5 m in depth from top of man holes to bottom of pipe line) by roding or by mechanical means and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burring the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers duly set in cement mortar 1 : 4 as wherever required complete all as specified and directed.

M & L for cleaning of blocked WC incl cleaning line from WC trap upto first manhole complete all as specified and directed.

M & L for cleaning of blocked nahani trap of bathroom, kitchen & WHB including cleaning of pipe line upto gully trap as required complete all as specified and directed.

M & L for cleaning of blocked gully trap complete all as specified and directed.

Taking off existing covers of septic tank, cesspool, soak well, lift well, soak pit or manholes and cleaning the same of any size/capacity by dewatering and taking out sludge in liquid mud, silt or in solid state after emptying the water with the help of combined high pressure water jetting cum suction (Vacuum) type machine mounted on vehicle having facilities of high pressure of water thermoplastic fiber blended water jetting hose & through conical or round shape nozzle pipe and removing the sludge to a distance not exceeding 1500m and burying the sludge in newly excavated pits of suitable sizes and covering the same with excavated earth and placing back in position the removed covers and set in cement mortar 1 : 4 complete all as specified and directed.

Soak well/ septic tanks/ manhole cleaning by mechanical suction pump tanker of capacity 3000 ltrs and laying/ throwing out of MOD Land as per all arrangement of contractor.

Excavation in trenches n.exc 1.50 m wide & n.exc 1.50 m in depth for foundation etc or for manholes, cesspits, shafts etc not exc 10 Sqm on plan and getting out in soft / loose soil, complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide & exc 1.50 m but n.exc 3 m in depth for foundation etc or for manholes, cesspits, shafts etc not exc 10 Sqm on plan and getting out in soft / loose soil, complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide & exc 3 m but n.exc 4.50m in depth for foundation etc or for manholes, cesspits, shafts etc not exc 10 Sqm on plan and getting out in soft / loose soil, complete all as specified and directed.

Taking out / demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of dia 150 mm dia set in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L SWG drain pipe 150 mm internal dia, grade `A' laid in trenches & jointed in cement mortar 1:1 complete all as specified and directed by Engineer-in-Charge.

M & L PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in bed of drain pipes including packing under and hunching against sides of pipes after they are laid and tested for 150 mm dia, complete all as specified and directed by Engineer-in-Charge.

Taking out / demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of dia 200 mm dia set in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L SWG drain pipe 200 mm internal dia, grade `A' laid in trenches & jointed in cement mortar 1:1 complete all as specified and directed by Engineer-in-Charge.

M & L PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in bed of drain pipes including packing under and hunching against sides of pipes after they are laid and tested for 200 mm dia, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation of manholes etc complete all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in surface channel & drain complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping etc including necessary form work complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in manhole covers incl necessary form work and set in CM 1:4 complete all as specified and directed.

Returning filling in trenches incl spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated materials n.exc 50m & depositing where directed at a level n.exc 1.5m above from starting point complete all as specified and directed.

M & L for PVC (SWR) floor trap, diameter of outlet in 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

sagar associates

AMAR NATH SHARMA

Nanda Brothers

Alankar Traders

shreyansh construction

nautiyalandcompany

M/S IRFAN AHMAD CONTRACTOR

HARNAM SINGH ANIL SINGH