Allied EI work for subway at Dum Dum Park Crossing of KNI Avenue (VIP Road) under Barasat Highway Division No. I.

Amount

Supply of Hooded type Distritbution Piller Box of size 750x500x200mm with both side opening & accessible door and locking arrangement made of 5mm M.S plate fixed to be on masonry base as per direction of EIC. The box should be comprising of 415V, 200A , 3/4 WAY Stud Type Power Terminal – 12 nos. Erection of Pillar Box of above size on 10" brick pedestal of 10" size 1200X1200X600mm (height 600mm bellow Ground level and 600mm above G.L) incl. sand cement plastering and neat cement finishing. Inside the brick pedestal will be filled up by loose sand where the incoming & outgoing cable will be rest.

Supplying ready mixed concrete of M20 Grade with well graded stone chips of 20 mm norminal size containing designed qty of cement per Cu. M of wet concrete produce in computerised batching plant under controlled condition using approved super plastisizer , designing mix following I.S. 10262 and I.S . 456 , transporting the mix with agitation in transit mixer to work site depositeing the mix on a platform erected for the purpose at required level of concreting and then placing the mix its final location of form work , compacting and curing the same complete as per specification & direction of Engineer - in - charge including computerized batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental of platform and its supporting. Extra Conceret used in repairing of road for laying of 50mm G.I pipe on road (Bituminus) 300 mm X 300 mm X 800 mm = 0.072 Cu.Mtr minus(-) 0.05mm x 0.05mm x 0.05mm = 0.000125 Cu.mtr (for GI pipe portion) Total = 0.071 Cu.Mtr. x 15 (length in mtr.) = (Road x-ing portion repairing)

Providing and laying special type of median kerb with M-25 Ready Mixed Concrete with Size of 550 mm (H) X 300mm (L) X 150mm (thick)……. For Parking Lot area ( Considering 10.5 mtr , used kerb (sumo) 35 Nos.) N.B :- Item Narration , New concrete Kerb chanel Supply , Fitting & Fixing .

Protective and Decorative Acrylic exterior emulsion of approved quality , as per manufacture's Specification and as per direction of Engineer -in- charge to be applied over acrylic primer as required . The rate includes cost of material , labour , scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) Premium 100% Acrylic Emulsion

Supply and Fixing PVC inspection Box 100x100x65 flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

Supply & Fixing of 9-meter Conical/Cylindrical GRP Street Light pole with MS Ring Arm made by CNC Filament Winding Machine using Thermoset Resin having 62%-65% Glass content in one piece, Top- 85±2 mm ID and Bottom- 216±2 mm ID. with MS Ring Arm/MS Straight Arm, Internal Junction Box (6A SP MCB & 4-way Connector) and Naksha (Flower & Leaf) on Pole Body and make approved by EIC.

Supply & Fixing of 9-meter Conical/Cylindrical GRP Street Light pole with MS Straight Double Arm made by CNC Filament Winding Machine using Thermoset Resin having 62%-65% Glass content in one piece, Top- 85±2 mm ID and Bottom- 216±2 mm ID. with MS Ring Arm/MS Straight Arm, Internal Junction Box (6A SP MCB & 4-way Connector) and Naksha (Flower & Leaf) on Pole Body and make approved by EIC.

Supply of 100 watt flood light LED Fittings having lumens-17200, Color Temprature : 6500, Voltage - 240V, IP-65 , Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required ( Make : Philips / CG / Havells / Bajaj )

Supply of 80W LED High Bay area light Fittings having Luminaire efficacy of 130 lumens/W, CCT (K) 5700, Total Harmonic Distortion <10 %, Ingress protection of IP66, Diffuser made of high grade toughened glass, Potted Driver & High Power LED, Internal surge protection of 4KV with additional 10KV surge, Operating Temperature: -10 degree-50 degree and Fixing the Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required ( Make : Philips / CG / Havells / Bajaj )

Supply and fixing of LED Flexible Linear Light delivers remarkably fluid color transitions, Line Voltage- 24V DC / 12 V DC, LED Type- SMD LED, LED Make- OSRAM/EDISON, Total power consumption- 15 watt / MTR, Lumens- 990 lm / MTR, Light Design- Silicon Epoxy based, Protection- IP 66 / IP 67, Transparency- 72%. ( Make : Philips / Unilux / Havells / K-lite )

Supply and fixing of Power Supply AC 230 V to DC 12 V / 24 V, IP 67, BIS Approved ( Make : Philips / Unilux / Havells / K-lite )

Supply and fixing SS Tie clamp with cliping arrangement for holding the Flexible Linear Light arrangement.

Supply and fixing of AC Rope Light for prefect ambience, IP 65 for superior life, Superior light output of 400 lm/m, Color White and Blue, 72 LEDs per m for bright and uniform light. Terms & Condition Fixing of rope lights shall be done as per direction of EIC. Necessary tools & trackles including manpower and necessary arrangement shall be done by agency. ( Make : Philips / Unilux / Havells / K-lite )

Supply and fixing of Constant Voltage LED Drivers, Application – with LED Tape/Strips, Short circuit and over voltage protection, Reliable, robust and versatile, High standards of safety, LED Transformer 24W 2A 12VDC ( Make : Philips / Unilux / Havells / K-lite )

Supply and fixing SS Tie clamp with cliping arrangement for holding the Flexible Linear Light arrangement.

Supply & Fixing of LED Bollard Light having IP65 Rated LED Bollard with robust design and efficient light distribution. (Cat No-LBLSN-10-CDL, Make- Crompton) ( Make : Philips / CG / Havells / Bajaj )

Supply of 4 core 4sqmm of 1.1 KV grade copper XLPE, PVC/ un-armoured LT cable ( Make : Havells/ Polycab/ Finolex )

Supply of 4 core 6sqmm of 1.1 KV grade Copper XLPE, PVC/ armoured LT cable ( Make : Havells/ Polycab/ Finolex )

Supply & fixing ACP board made of 3 mm thick ACP Sheet (Aludecor make) finished with approved metallic colour as back ground colour approved by department & fixed on M.S./Aluminium structure. (1.5 ft x 5 ft) = 7.5 sqft (edge to edge)

Supply & fixing ACP board made of 3 mm thick ACP Sheet (Aludecor make) finished with approved metallic colour as back ground colour approved by department & fixed on M.S./Aluminium structure. (1.5 ft x 2 ft) = 3 sqft (edge to edge)

Supply of ACP plus toughened board for back side fabricated with requisite cover for framing the LEDs & protecting the back side for inside wiring,LED & SMPS . (1.5 ft x 2 ft) = 3 sqft (edge to edge)

Supply, fixing & connection by necessary wiring of special type of Imported Acrylic laser cut letter 08 mm fixed on ACP sheet after router cutting ACP board. Letter Font = (English). Letter colour = White. Letter style= Arial Narrow Letter Size details approve by EIC

Supply, fixing & connection by necessary wiring of LED inside the acrylic letters on back side frame of the ACP board , The Specification of the is given below. a) LED: white - Samsung module b) Type : Double line ,fixed c) Life: 70,000burning hours. d) Intensity- Same & smooth throughout ,no bright or light or dark patches. e) Visibility: 50 mtr at least for normal eye. f) power supply : required amp (MeanWell LRS-12) g) Ambient Air : 0-50c .100% relative humidity. h) Power consumption – 1.08 watt per module

Supply, fixing & connection by necessary wiring of Power supply MeanWell LRS-required amp-12 volt ( Make : Meanwell/ Honeywell/ Philips )

Making M.S. frame structure by 50x5mm M.S. L type angle, L=6' of size incl. welding the Angle by using welding machine & fixing the same on the both side of the existing pillers or base by cutting the same & mending good damages & fixing the board with the above M.S. channel by supplying & fixing nut bolts, washers as per direction of E.I.C.

Micro tunneling including supply of HDPE pipe 40mm dia as per appropriate specification in single lengths for each individual tunnel.

Bituminious Road cutting by using Jac Hamour Compressor Machine, Fuel, Mobile, Compressor Operator and Three Breaker.

SIGMA ENTERPRISE

COSMOS CONSTRUCTION