REPAIR/MAINT AND REPLACEMENT OF STREET LIGHTS, PERIMETER LIGHTS, TARMAC LIGHTS, HIGH MAST LIGHTS, FLOOD LIGHTS AND ALLIED ITEMS IN TECH AREA OF AF STN AMBALA UNDER GE (AF) AMBALA

Amount

M&L for taking down high pressure SV/ MV/ MH /FTL/LED street light fitting and Flood Light fittings of any wattage / any height of pole/ walls/ any location for repairs or replacement of burnt out the accessories and rectifying the fault complete all as specified and directed. Note: - LED Drivers, Surge protection and cable shall be measured separately under relevant items of this schedule

S&F in replacement 5 KV SPD for LED street light, 230 volts, 50 HZ compatible for industrial & outdoor LED Fixtures up to rated power of 120 W /90W /70W for fixing in repairs complete all as specified and directed

S&F in replacement Drivers for LED street lights 45W/ 70W / 90W / 120W, 230 Volts, 50 HZ complete all as specified and directed

S&F in replacement Drivers for LED flood light 70W / 90W / 120W/ 250W, 230 Volts, 50 HZ complete all as specified and directed

S&F in replacement energy efficient LED flood light fitting, 250W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI >70, PF>0.9, minimum 25000 burning hours,LM-80, lumen efficacy ≥100 lumen/watt, THD> 20, Aluminium housing including all fixing arrengment like clamps, nuts, bolts, washers, 120W LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations including taking down the old unserviceable fittings complete all as specified and directed

All as per BOQ srl item No.05 here in above but 120W complete all as specified and directed

All as per BOQ srl item No.05 here in above but 70W complete all as specified and directed

S&F in replacement energy efficient LED street light fitting, 120W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI >70, PF>0.9, minimum 25000 burning hours,LM-80, lumen efficacy ≥100 lumen/watt, THD> 20, Aluminium housing including all fixing arrengment like clamps, nuts, bolts, washers, 120W LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations including taking down the old unserviceable fittings complete all as specified and directed

All as per BOQ srl item No.08 here in above but 90W complete all as specified and directed

All as per BOQ srl item No.08 here in above but 45W complete all as specified and directed

S&F in replacement LED high / mid-bay light fitting 120W, 230V, PF 0.9, CRI >70, L 70, with pressure die cast aluminium housing, aluminium reflectors in commercial channel with powder coated Aluminium sheet housing with clear diffuser, with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with suitable size rod including taking out and disposing old fitting any type complete all as specified and as directed Note: The quoted rates is inclusive of making fixing arrangement for fixing new light and taking down unsv old light at any height.

All as per BOQ srl item No.11 here in above but 150W complete all as specified and directed Note: The quoted rates is inclusive of making fixing arrangement for fixing new light and taking down unsv old light at any height.

S&F in replacement PVC insulated copper conductor cable, 3 core 1.5sqmm, served with inner sheathing of PVC tape and overall PVC sheathed, 1100V grade heavy duty in connections complete all as specified and directed

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspebded by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire one twin core flat of size 6 sqmm solid aluminium conductor complete all as specified and directed.

All as per BOQ srl item No.14 here-in-above but of size 10 Sqmm complete all as specified and directed

M&L for painting the swaged steel tubural LT poles including cross arms,clamps and light bracktes surface of any discription after preparation of old painted surface(removing old paint by paint removers and cleaning with scraper any number of existing coats) with one finishing coat aluminium paint and marking pole no. as per exiting numbers and painting of lower portion of pole in alternate layer of black and yellow shades/colour complete.

S&F end joint kit in replacement for 1.1 KV grade suitable for outdoor/indoor type terminal heat shrinkable type joints with jointing material for 3.5/4 core XLPE armoured aluminium conductor cable of size 16/25 Sqmm complete all as specified and directed

All as per BOQ srl item No.17 above but of cable 3.5 core 35/50Sqmm complete all as specified and directed

S&F jointing kit in replacement kit for 1.1 KV grade suitable for straight through heat shrinkable type joints with jointing material for 3.5 core XLPE armoured aluminium conductor cable of size 16 to 50 Sq mm complete all as specified and directed

Supply and Laying in replacement LT underground cable XLPE insulated and sheathed armoured cable 1100 volts 4 core 16 Sqmm aluminium conductor in trenches/poles and connecting with all accessories complete all as specified and directed by Engineer-in-Charge.

All as per BOQ srl item No.20 here-in-above but of cable 3.5 core 25 Sqmm complete all as specified and directed

All as per BOQ srl item No.20 here-in-above but of cable 3.5 core 35 Sqmm complete all as specified and directed

All as per BOQ srl item No.20 here-in-above but of cable 3.5 core 50 Sqmm complete all as specified and directed

S&F lugs for UG cable for 3.5/4 core 16Sqmm to 50Sqmm complete all as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth/width and getting out loose/soft soil for laying of under ground cable complete all as specified and directed

Returning filling in including spreading, levelling and well ramming in layers not exceeding 25cm in thick complete all as specified and directed

Removal of surplus soil to a distance not exceeding 50m away and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L for sand cushioning to cable with a layer of sand 8cm deep before laying the cable and 15cm deep after laying the cable (punned down to 18cm depth after laying and stretching of cable) complete all as specified and directed Note: Punned down thickness of 18cm shall be measured for payment purpose only.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

M&L for Making bore to road/cement path/hard standing for providing GI pipe 50/40mm both end socketed for passing armoured cable incl making good the disturbed surface complete all as specified and directed

S&F in replacement security light bracket with 40mm bore GI tubing, light grade, cut and bent to shape required, 1.2m long fixed with including bends, flat iron clamp made of FI 40x6mm, nuts, bolts, washers, etc. duly painted with two coats of synthetic enamel paint over a coat of red oride zinc chrome primer complete all as specfied and as directed

S&F in replacement Integral LED aviation light comprising of aluminium housing. with polycarbonate enclosure complete all as specified and directed

S&F in replacement Metallic ERW steel conduit 20mm dia with adaptor to 15-20 Mtr High Mast light fitting complete all as specified and directed

M&L for repairs and maintenance of LED Solar lights with necessary maintenance of solar panel with replacement clamps and worn out leads including taking down old one complete all as specified and directed

S&F GI tubing of 50mm dia light grade at road cross for protection cable as per site requirement and sealing the pipe both ends with sealing compound complete all as specified and directed

All as per BOQ srl item No.35 here-in-above but 40mm dia complete all as specified and directed

S&F in replacement MCCB 4P 63A 16kA 50Hz with adjustable thermal release fixed magnetic protection complete all as specified and directed

M&L for plain cement concrete 1:2:4 (type B-1) using 20mm graded mechanically crushed stone aggregate as in coping to poles, etc. complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded mechanically crushed stone aggregate as in bases to poles, stays, plinths, etc. complete all as specified and as directed

S&F in replacement automatic street light switch using timer for automatic switching of street lights, 5kW, single phase, based on LUX level of natural light, infrared sensor based on nature switch along with contactor 16A, MCB SP for input and output 32A, wiring for main load with 3 core 16sqmm copper cable duly fixed to pole/wall, mounted on enclosure made out of rust proof, electric shock proof, termite proof and FR grade SMC junction box of protection class IP 54 fixed at any location complete all as specified and as directed

S&F in replacement automatic street light switch using timer for automatic switching of street lights, 8kW, single phase, based on LUX level of natural light, infrared sensor based on nature switch along with contactor 40A, MCB SP for input and output 63A, wiring for main load with 3 core 16sqmm copper cable duly fixed to pole/wall, mounted on enclosure made out of rust proof, electric shock proof, termite proof and FR grade SMC junction box of protection class IP 54 fixed at any location complete all as specified and as directed

S&F in replacement automatic street light switch using timer for automatic switching of street lights, 18kW equally distributed over 3 phases, based on LUX level of natural light, infrared sensor based on nature switch along with contactor 25A/phase, MCB SP for input and output 63A, wiring for main load with 3.5 core 16sqmm copper cable duly fixed to pole/wall, mounted on enclosure made out of rust proof, electric shock proof, termite proof and FR grade SMC junction box of protection class IP 54 fixed at any location complete all as specified and as directed

M&L for digging of cable loop of LT XPLE cable of any size with all necessary excavation and return filling and replacing the end joint / straight through joint kit in replacement for 1.1kV grade with provision of jointing material for 3.5 core XLPE armoured aluminium conductor cable of any size complete all as specified and as directed Note: End/straight through joint will be measured and paid separately under respective items herein. All other requisites shall be deemed to be included in the quoted rate

S&F in replacement junction box thermoplastic polycarbonate enclosure, shock proof, IP65/IP66 (weather, rust, dust, water and vibration proof, outdoor type, internally embedded gasket with provision for all side cable entry through glands of size 250x200x100mm with 4Nos. aluminium bus bar of size 25x6mm, 8Nos. terminals with and including 01No. 10Amp MCB 10kA duly mounted fixed with MS clamps fabricated out of FI 40x3mm of required shape and size and fied at any location complete all as specified and as directed

S&F in replacement flame proof weather proof energy efficient LED light fitting, 150W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI >70, PF>0.9, minimum 25000 burning hours,LM-79, lumen efficacy ≥100 lumen/watt, THD> 20, Aluminium housing including all fixing arrengment like clamps, nuts, bolts, washers with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations/ height including taking down the old unserviceable fittings complete all as specified and directed

S&F in replacement flame proof weather proof energy efficient LED flood light fitting 60W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI >70, PF>0.9, minimum 25000 burning hours,LM-79, lumen efficacy ≥100 lumen/watt, THD> 20, Aluminium housing including all fixing arrengment like clamps, nuts, bolts, washers with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations including taking/height down the old unserviceable fittings complete all as specified and directed

M&L for taking down by manual / motorised handle high mast light fittings at 15 to 20m height and refixing after necessary repairs including all necessary staging, etc. for cleaning of perplex covers, etc., tightening of loose connections on poles / walls, and replacing worn out minor parts, etc. and making the fitting functional complete all as specified and as directed Note: Quoted rate shall be deemed to be inclusive of any minor spares / parts replaced for functioning.

M&L for taking out burnt winding of 3 phase power tool electric motor of high mast fittings from any position, rewinding with super enamelled copper wire of existing size/gauge and varnishing, providing insulating paper and sleeves, etc. and testing for proper functioning on reinstating complete all as specified and as directed Note: Quoted rate shall be deemed to be inclusive of any minor spares / parts replaced for successful functionality of the motor

S&F steel wire hemp rope 8mm dia by taking out damaged rope and other minor parts suitable for high mast fittings15-20m high, like 'D' clamps, nuts, bolts, washers, etc. replacing as needed and making the installation serviceable and testing for proper functioning on reinstating complete all as specified and as directed Note: Quoted rate shall be deemed to be inclusive of any necessities, T&P, etc. required forworking at 15-20m heights, etc. cost of necessary scaffolding & security provision of labour shall be deemed to be included in the quoted rate.

Esha Engineers (BID ID -3331165)

R N Enterprises (BID ID -3334002)

Goyal Engineers (BID ID -3339557)

OMVIN ENTERPRISES LLP (BID ID -3338772)

sanjeev enterprises (BID ID -3331740)

M/S Sonu Traders (BID ID -3329810)

The Rahul Vig (BID ID -3334853)

PAUL REFRIGERATION (BID ID -3332031)

Haryana EngineerService (BID ID -3339666)

M/s R&R Enterprises (BID ID -3328092)