Construction of Public Toilet Block (Type-D) at North side of GNC area KKC duly dismantling the old dilapidated existing toilet at Tirumala.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work in Ordinary soil-Manual means up to 3m depth.

Earthwork excavation for road way in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with intial lift of 3 m and lead up to 1000 mt, including trimming bottom and side slopes in accordance with with requirements of lines grades and cross sections as per technical specifications clause 302.3.5 MORD/301 MORTH - Mechanical means.

Note: 1 1. The quality, quantity and availability of rock shall be checked before affording credit. 2. In case some rock is issued to the contractor, rate as arrived per cum to that issued extent shall be deducted. 3. In case some rock is issued to the contractor at site , the item carriage shall be restricted / reduced to that extent. 4.Being small quantity, manual loading will be economical in this case and has been provided accordingly.

Note 2: The BoCE committee has resolved to amend the standard data of earth work items such as earth work excavation in all types of soils and rocks and refilling beyond 3.0 M depth, for every 1.0 M depth or part there of, allowance of 10% extra shall be added over the basic rate.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work. Note: Cost of transportation of good quality earth has not been included. Only labour for carrying carted earth with a lead of 50m to the foundation pits has been taken in the rate. The cost of carted earth / sand may be worked out separately if the same is not available from adjoining area.

Cement Concrete (1:4:8) using 40 mm ( 0.54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum)nominal size hard broken granite crushed metal from any source conforming to the relevent ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing,machine mixing, cost and conveyance of all materials etc., complete.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kgs/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

-do- for footings

-do- for Columns upto Basement (Pedestals)

-do- for Plinth Beam

-do- for columns in First Floor

-do- for Lintel Beams in First Floor

Providing high yield strength Deformed bars (HYSD) Thermo Mechanically Treated (TMT) bars of HYSD bars below 36mm Fe-500/Fe-500D grade (as per IS 1786-1979) of different dia metres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126).

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of Brick Masonry in CM (1:6) (-do- up to basement)

Construction of Brick Masonry in CM (1:6) (-do- in First Floor)

Construction of 110 mm thick Brick partition walls in CM (1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230 x 110 x 70mm) including curing, cost and conveyance of all materials etc,. Complete

Plastering in CM (1:5) 20 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Plastering in CM (1:5) 12 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Flooring with Antiskid floor tiles of Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Finishing the sides of walls with Ist quality glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

Supply and fixing of 10mm wide PVC edge beading including cost and conveyance of all materials and incidental charges, etc., complete.

Flooring with cement concrete floor tiles of 25 mm thick confirming to IS 1380-12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply). -do- Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Supply of MS tubes & pipes of all diameters as per IS 1161

Supply of MS Angles, Channels, I Sections etc., complete. TATA,JINDAL,SAIL,VIZAG ETC., OF APPROVED MAKE .

Supply of M.S Plates & Rods

Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position and labour charges for fixing iron doors, Iron windows and window grills in position.

Painting two coats for new work with Ready mixed Synthetic Enamel paint in all shades Grade-I and single coat for Red Oxide metal primer paint (Total Three coats) having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length: Maximum 2½ Meters.

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls. -do- for new work

Painting two coats for new work with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter and one coat of Cement primer for exterior grade - 2 (Total three coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" 580 x 440mm trap ISI Mark or equivalent brand approved by the department.

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent brand approved by the department.

Supply & fixing of 10 Litres capacity Single Flush PVC low level cistern with internal components & short bend.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supplying & Fixing white glazed flat back half stall 590 x 375 x 390 mm urinals 1st quality confirming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm confirming to IS:2556 - Part 6, Sec-6-1974 fixed with screws complete Indian make with ISI mark or equivalent approved by the department.

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'S' trap with ISI mark or equivalent brand approved by the department.

SYMET 2 in 1 Faucet (1.50 mts. Tube) with hook ( Prayag make CAT.NO:188) as directed during execution.

Supply and fixing 12.7mm NP stop cock Indian make heavy duty (400 Grms)

Supply and fixing 12.7mm dia NP pillar cock heavy duty 1st quality Indian make (400 grams) as directed during execution.

Supply fixing of Waste coupling Jaquar make, Chrome finish with 7 years warranty.

Supply and fixing 12.7mm NP bib tap (Long Body) Indian make heavy duty 400 grams. as direct during execution.

Supplying & fixing NP coat hook

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

-do- 54.00 mm OD pipe SDR - 13.50

-do- '28.60 mm OD pipe SDR - 13.50

'-do- 22.20 mm OD pipe SDR - 13.50

Supply and fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size

Supply and fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size

Supply of round Jali

Supply of 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)

Supplying, laying and jointing in position the following dia metre of Prince / Sudhakar make or equilent quantity PVC/ SWR pipes 6Kg/sqcm including labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc., including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice as directed during execution.

-do- 160mm dia pipe double Socket

-do- 110 mm dia Single socket pipe

-do- 75 mm dia Single Socket pipe

Supplying & Fixing 12.7 mm PVC connection with brass union nut C P coated

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply) -do- Cherry Red Granite 18-20 mm thick upto 2.43 M

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply) -do- telephone Black Granite 18-20 mm thick upto 2.43 M

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. lt will be fixed to the frame using 3 inch /4 inch hinges. Minimum of 4 hinges are to be provided for fixing the door with the frame.

Supply of the following Fixtures for Doors and windows

Anodized Aluminum Tower Bolts 10mm dia x 150 mm Long with ISI Mark IS:204

Supply & fixing of Anodized Aluminium Aldrops (IS 2681) 16mm x 200mm (3T-Pieces) long make

Anodized Aluminium Door Handles (IS:208) 150 mm long.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Demolition doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architarves, holdfasts and other attachments etc., complete and stacking them within 100 metres lead. -do- not exceeding 3 Sqm in Area

Demolishing and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete up to 15cm thickness

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work.

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for RCC Work

Conveyance of excavated surplus earth/debris to a distance 2 km from the site of work to the place where specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.