Annual surface of Dadh Malan road Km 0/000 to 4/250 (MDR-48) in Tehsil Nagrota Bagwan, Distt Kangra (HP) (SH Providing and laying 30mm thick Bituminous concrete with paver finisher complete in Km 0/000 to 4/250).

Amount

Providing and applying tack coat with Bitumen emulsion (RS-I) on the prepared bituminous/granular surface cleaned with Hydraulic brooms and spraying primer at the rate of 0.225 kg per sqm (zero decimal two two five kilograms) per square metre using mechanical means as per Technical Specification Clause 503 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document.

Providing and laying 30mm (Thirty milimetres) thick bituminous concrete with 100-120 TPH batch type HMP (Hot Mix Plant) producing an average output of 75 tonnes (Seventy five) tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-10 (Viscosity grade-Ten) @ 117.80 Kgs (One hundred seventeen point eighty kilograms) per cubic metre and filler 2% (Two) percent by weight of aggregate i.e. 44.764 Kgs (Forty four point seven six four kilograms) per cubic metre mixing and transporting the hot mix to work at site, laying with a hydraulic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 509 complete in all respect and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document.

Providing and laying hot applied Thermoplastic compound 2.5mm(Two decimal five milimetres) thick 0.10 (Zero point ten) widecentre line including reflectorising glass beeds at the rate of 250 gms (Two hundred fifty grams) per square metre area thickness of 2.5mm (Two decimal five milimetres) exclusive of surface applied glass beeds by road marking machine as per IRC–35. The finished surface to be level uniform and free from streaks and holes as per MORD Technical specification Clause-1702 and as directed by Engineer-Incharge, including carriage of materials within all leads, lifts of materials and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document.

Navneet Thakur