Site Survey, Designing, Engineering, Procurement, Supply, Loading, Transportation, Unloading, Insurance, Delivery at Site, Handling, Storage, Installation, Testing, Commissioning Including Documentation of All Items/Material required to complete works for Turnkey Based Contract For Conversion of Existing 11 kV HT Line and LT Line Network Including Consumer Service Lines Into Under Ground Cable Network With Ring Main System at Kaliabid (Part-2) Subdivision of Bhavnagar Circle Under PGVCL with GIS Mapping / Geo Urja Mapping (Developed by GUVNL) and Asset Tagging under SI Scheme (Package-30)

Conversion of Over Head to Underground Network

Kaliabid Sub Division (Part-2) of Bhavnagar city-2 Division of Bhavnagar Circle

Particulars of Item Grand Total in Rs.

Particulars of Item Grand Total in Rs.

SCHEDULE-B1: CONVERSION OF EXISTING OVERHEAD ELECTRICAL HT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

SCHEDULE-B2: CONVERSION OF EXISTING OVERHEAD ELECTRICAL LT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

A TOTAL AMOUNT (WITHOUT GST)

A TOTAL AMOUNT (WITHOUT GST)

3 BIDDER'S OFFER ( + / - ) IN % 0.00%

4 BIDDER'S OFFER ( + / - ) IN RUPEES

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

5 GST @ 18% ON "B"

C GRAND TOTAL (WITH GST)

C GRAND TOTAL (WITH GST)

Date Signature of Bidder Stamp

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

SCHEDULE-B1: CONVERSION OF OVERHEAD TO UNDERGROUND HT ELECTRICAL NETWORK

RMU : Supply, installation, testing & Commissioning of 11 KV SCADA,

Non-SCADA Ring Main Unit SF6 Gas Insulated as under preferably

1 Siemens/ Schneider/ABB/CG. (Including RCC foundation, masonry and

all civil works, as per approve drawing by PGVCL)

a SF6 Ring Main Unit with SCADA switching facility 630 A extensible.

i 11KV SCADA RING MAIN UNIT 3 ISOLATOR (3-WAY) Nos. 5 527678 2638387.5 5 10751.35 53756.75

11KV SCADA RING MAIN UNIT 1 CIRCUIT BREAKER 2 ISOLATOR (3-

11KV SCADA RING MAIN UNIT 1 CIRCUIT BREAKER 3 ISOLATOR (4-

11KV SCADA RING MAIN UNIT 2 CIRCUIT BREAKER 2 ISOLATOR (4-

Distribution Transformer: Supply, installation, testing & commissioning

of 11/0.433KV, Outdoor Transformers with HV/LV cable end Boxes and

CTs commissioned at LV end boxes for the following ratings

(Transformer shall be suitable for pole mounting/Plinth mounting/

Structure upto 500 kVA (Including plinth/structure) as per standard

technical specification

a 200 KVA CRGO/Amorphous core Nos. 128 404968 51835891.2 128 14297.95 1830137.6

b 315 KVA CRGO/Amorphous core Nos. 75 1023686 76776472.5 75 14297.95 1072346.25

c 500 KVA CRGO/Amorphous core Nos. 79 1135362 89693570.35 79 14297.95 1129538.05

Supply,installation,Testing & commissioning of 11 kV,(E),XLPE

insulated Aluminium Conductor, Armoured cable, Sand as per

a enclosed specification, including rates for approval of local Authorities

for laying of cable.(Make as approved by GUVNL) With excavations

and, back filling as per specification

Providing and Laying of HDPE ducts confirming to IS:4984 having dia.

OD/ID 140/100.mm, 6kg/cm2, 11.63 kg/6 RMT at a minimum depth of

1200mm below the road surface by push through method by drilling the road

4 with HDD machine without breaking the road surface for laying of cable for Mtrs. 25313 604 15282858.99 25313 949 24015921.27

internal GIDC road crossing for enclosing HT/LT XLPE insulated aluminum

armoured cable up to 300 sqmm through the duct as per the instructions of

EIC (Engineer In Charge).

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

OUTDOOR TERMINATION KIT: HT push on/heat shrink type end

termination preferably 3m(m-seal) or Raychem make at switchgear end

boxes, transformer(PAD/Pole mounted) for 3 core 11 kV XLPE

5 Aluminium Conductor Armoured cable as specified with connection of

leads including cutting, stripping of cable, insulations, providing

compression type terminals, crimping of lugs with suitable crimping

tool for outdoor application

INDOOR TERMINATION KIT : HT push on/heat shrink type end

termination preferably 3m(m-seal) or Raychem make at switchgear end

boxes, transformer (PAD/Pole mounted) for 3 core 240 Sq mm 11 kV

6 XLPE Aluminium Conductor Armoured cable as specified with

connection of leads including cutting, stripping of cable, insulations,

providing compression type terminals, crimping of lugs with suitable

crimping tool for Indoor application

G:STRIGHT JOINT KIT: HT push on/heat shrink type straight joint

preferably 3m(m-seal) or Raychem make for up to 3 core 300/240/185

Sq mm 11 kV XLPE Aluminium Conductor Armoured cable as specified

with connection of leads including cutting, stripping of cable,

insulations, providing compression type terminals, crimping of lugs

with suitable crimping tool.

8 Lying of all types of cable in trench(without Excavation) Mtrs. 1421 173 245064.057

9 Lying of cable on pole Mtrs. 1974 44 86263.8

10 Lying of the cable in the Pipe(Without Excavation) 71 58 4084.40095

11 Drilling work in Road Crossing through push through Mtrs. 71 569 40435.56941

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

Supply and fixing of GI Pipe on wall/Pole (100 mm Dia Medium Duty pipe

13 with rubber gland at both ends to avoid cable damages). This includes Mtrs. 1410 403 567525 1410 230 324300

providing and fixing of M.S clamp at every 1 Mtr.(As per Directive of EIC)

Supply and installation of any clamps made from 50x6 mm GI flat for

14 fiiting100 mm dia medium class GI pipe/any other pipes above ground with Pair 1128 115 129720 1128 35 38916

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 6 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

16 provide indication cable route below land surface in underground trench to Mtrs. 71033 17 1225320.285 71033 6 408440.095

protect cable for mechnical injuries.

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

17 cables shall be provided at every termination of all cables stating detail as Nos 682 28 18823.2 682 9 6274.4

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU name

of HT/LT cables shall be provided at every 150 MTR

HT Feeder: Substation/Feeder LT Feeder

: PSS/Transformer/FSP

EARTHING PIT : Supplying & erecting earth pit of minimum bore dia.

mm size approved make safe Earthing Electrode consisting Pipe in pipe

Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 50 mm having 80-200 Micron galvanising connections,

19 terminal dia. of 12 mm with constant ohmic value surrounded by highly Nos. 964 7475 7205900 964 1150 1108600

conductive compound with high charge dissipation with civil works of

earthing chamber. For Electrical installation covering Transformer neutrals,

HT & LT switchgears for independent earthing in normal soil, Length of Pipe

3 mtrs. Backfilling compound 2 bags of 25 Kg each.

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

20 for pole mounted transformer and RMU Etc as well as connection to be Mtrs. 2892 159 458960.4 2892 60 172941.6

made to the earth pit. Rates inclusive of hot dipped hardwares.

Obtaining statutory approval from Electrical Inspector for installation

22 DISMENTALLING:

Dismentalling of pole mounted transformer,stacking the same after

transporting to discom store without any damage as and where condition.

a Up To 500 KVA Nos. 265 2875 761875

b Above 500 KVA Nos. 1 4025 4025

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

23 etc.and return it to discom store.While dismentalling utmost care shall be Nos. 284 155 44091

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

24 material & after making coil and stacking the same at discom store.Routte Km. 14 2300 32637

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

26 as per drawing duly marked with "DANGER" mark, "discom POWER Nos 710 345.00 244950 710 115.00 81650

CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to PGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

FENCING: FRP Fencing for RMU and PSS, post shall be made out of FRP

Pultruded hollow section of size 50x50x5mm.. and shall be grouted in the

ground with c. c. of ratio 1:3:6., Sub frame provided using hollow FRP

a section 50x25x5mm or FRP angles 50x50x5 at top and bottom and other RMT 4433 4,012.58 17787767.14 4433 794.8225 3523448.143

accessories for fixing of gates etc. Rails shall be made out of FRP notch

bars of 12mm dia, Pickets shall be made of flats of size 35x5mm SMC or

FRP as per specifications and Drawing NO: discom/R&D/Fencing/FRP/001

DTC: Fixing of DTC meter at all Transformers Center in such manner that

29 meter reading may be taken easily without obstruction due to fencing of Nos 282 1265 356730

RMU (excluding Meter/Meter Box/Cable)

Paint Pointed Letter 2 inch size(Marking on RMU, Transformer, In any

palce.(As per directive of Engineer Incharge) with supply of color

31 Insulation Resistance Tester for Cable testing 10KVA-SDN wise Nos. 8050 0

Total HT-UG (Supply+ Erection) 454335930 66492220

SCHEDULE-B2: CONVERSION OF OVERHEAD TO UNDERGROUND LT ELECTRICAL NETWORK

Providing & erecting XLPE(IS:7098) (I)-88 ISI marked multistrand Aluminium

conductor armoured cable ,sand for 1.1 kV to be laid on pole or in existing

cable trence/pipe at road crossing of following size of cables. Work carried

1 out up to consumer premises with meter shifting, and provide load side

cable as per site conditions and as per EIC. For consumer premises DWC

pipe should be provieded(With Excavation, back filling and sand as per

technical specification)

LT CABLE TERMINATION: Cable termination on FSP,LT Distribution

Transformer Box,MSP/SFU /Busbar etc of pole mounted transformer of LT

cable grade as specified below including cutting,stripping of

cable,insulations,providing compression type terminals,suitable cable

glands,crimping lugs with necessary connections.Work carried out up to

consumer premises with meter shifting, and provide load side cable as per

site conditions and as per EIC. For consumer premises DWC pipe should

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

3 Lying of all types of cable in trench(without Excavation) Mtrs. 66426.00 173 11458485

4 Lying of cable on pole Mtrs. 1309.50 44 57225.15

5 Lying of the cable in the Pipe(Without Excavation) 664.26 58 38194.95

6 Drilling work in Road Crossing through push through Mtrs. 6547.50 569 3727164.375

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

8 Supply, intstallation of the DWC pipe(Without Excavation)

Lt cable saddling works: Direct cable saddleing with wall and etc for this

work GI type saddle and nail shall be used.

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 4 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

11 provide indication cable route below land surface in underground trench to Mtrs. 104760.00 17 1807110 104760.00 6 602370

protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

12 cables shall be provided at every termination of all cables stating detail as Nos 9760.00 28 269376 9760.00 9 89792

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU

13 name of HT/LT cables shall be provided at every 30 MTR Nos. 22142.00 28 611119.2 22142.00 9 203706.4

HT Feeder: Substation/Feeder LT

Feeder : PSS/Transformer/FSP

EARTHING PIT : Supplying & erecting earth pit of minimum bore dia.

mm size approved make safe Earthing Electrode consisting Pipe in pipe

Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 50 mm having 80-200 Micron galvanising connections,

14 terminal dia of 12 mm with constant ohmic value surrounded by highly Nos. 2440.00 7475 18239000 2440.00 1150 2806000

conductive compound with high charge dissipation with civil works of

earthing chamber. For Electrical installation covering Transformer

neutrals,HT & LT switchgears for independent earthing in normal soil,

Length of Pipe 3 mtrs.Backfilling compound 2 bags of 25 Kg each.

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

for pole mounted transformer and upto FSP,RMU,MSP,SFU, Busbar Etc as

well as connection to be made to the earth pit. Rates inclusive of hot dipped

Obtaining statutory approval from Electrical Inspector for installation

17 DISMENTALLING:

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

a etc.and return it to discom store.While dismentalling utmost care shall be Nos. 2190.00 155 339997.5

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

b material & after making coil and stacking the same at discom store.Routte Km. 87.55 2300 201365

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

FSP (FUSE SECTION PILLER): 4 Way

Supplying and erecting 120x100x40 cms. Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) or metal body(As

per Specification and drawings) with cable clamps to be burried in ground

to have appropriate erection on look unifrom unit erected with cement

concrete foundation and 45 cms high brick masonry internal supported on

i both side with intrnal and outer side locking arrangement with lock and keys

in duplicate .Incoming switchgear SFU of TPN and outgoing HRC SMC

fuse base and knife type links 32 Amp to 630 Amp capacity fuse base fitted

on 630 Amp current capacity copper Busbar with RYB colour coding and

insulated strip with all internal connections and entry for incomming up to

core 300 sq mm 4 nos and outgoing 3 nos. 31/2 core cables of suitable

sizes. (As per Technical specification of FSP ) (Erection shall be carried out

as per approved drawing and site condition) (SFU Amp Capcity is as under)

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

FSP (FUSE SECTION PILLER): 6 Way

Supplying and erecting 120x100x40 cms.Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) or metal body(As

per Specification and drawings) with cable clamps to be burried in ground to

have appropriate erection on look unifrom unit erected with cement concrete

foundation and 45 cms high brick masonry internal supported on both side

ii with intrnal and outer side locking arrangement with lock and keys in

duplicate .Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base fitted on

630 Amp current capacity copper Busbar with RYB colour coding and

insulated strip with all internal connections and entry for incomming 1 core

300 sq mm 4 nos and outgoing 5 nos. 31/2 core cables of suitable sizes.

(As per Technical specification of FSP ) (Erection shall be carried out as

per approved drawing and site condition)(SFU Amp Capcity is as under)

MSP(Mini Section Piller) : 4 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a single

piece) i.e. Glass Reinforced Polyester Sheet Moulding Compound

(SMC) or Metal Body Type Enclouser(As per Specification) with cable

clamps to be burried in ground to have appropriate erection on look

uniform unit erected with cement concrete foundation and 45 cms

high brick masonary internal supported on both side with internal and

outer side locking arrangement with lock and keys in duplicate.

Incoming HRC SMC fuse base and kinfe type links 32 Amp to

Amp. capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos.

and outgoing 3 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 6 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a single

piece) i.e. Glass Reinforced Polyester Sheet Moulding Compound

(SMC) or Metal Body Type Enclouser(As per Specification) with cable

clamps to be burried in ground to have appropriate erection on look

uniform unit erected with cement concrete foundation and 45 cms

high brick masonary internal supported on both side with internal and

outer side locking arrangement with lock and keys in duplicate.

Incoming HRC SMC fuse base and kinfe type links 32 Amp to

Amp. capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos.

and outgoing 5 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

MSP(Mini Section Piller) : 8 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a single

piece) i.e. Glass Reinforced Polyester Sheet Moulding Compound

(SMC) with cable clamps to be burried in ground to have appropriate

erection on look uniform unit erected with cement concrete

foundation and 45 cms high brick masonary internal supported on

iii both side with internal and outer side locking arrangement with lock

and keys in duplicate. Incoming HRC SMC fuse base and kinfe type

links 32 Amp to 250 Amp. capacity, fuse base fitted on 250 Amp.

current capacity copper Busbar with RYB colour coding and insulated

strip with all internal connections and entry for incoming up to

Core 300 Sq.mm 1 Nos. and outgoing 7 nos. 3.5 core cables of

suitable sizes.( As per Technical specification of MSP)

Supply, Instalation, Testing, Commissioning switch fuse unit made by

SMC Box and capacity of 125 A, Mostaly used in flat/Socity area.

20 Installation worked caried out with instruction of EIC. And as per the Nos. 485.00 12087 5861952.5 485.00 1150 557750

drawing approved by CA- Minimum 16 Nos. of CKT

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by SMC box and capacity of 200 A, Mostaly used in flat area.

21 Installation worked caried out with instruction of EIC. And as per the Nos. 139.00 18400 2557600 139.00 1150 159850

drawing approved by CA - Minimum 16 Nos. Of Circuit

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by SMC box and capacity of 400 A, Mostaly used in flat area.

22 Installation worked caried out with instruction of EIC. And as per the Nos. 69.00 20700 1428300 69.00 1323 91252.5

drawing approved by CA- Minimum 16 Nos. Of Circuit

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

23 as per drawing duly marked with "DANGER" mark, "discom POWER Nos 961.80 345.00 331821 961.80 115.00 110607

CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to PGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

FENCING: FRP Fencing for FSP/MSP/SFU/BUSBAR, post shall be made

out of FRP Pultruded hollow section of size 50x50x5mm.. and shall be

grouted in the ground with c. c. of ratio 1:3:6., Sub frame provided

a using hollow FRP section 50x25x5mm or FRP angles 50x50x5 at top RMT 61.00 4,012.58 244767.38 61.00 795.225 48508.725

and bottom and other accessories for fixing of gates etc. Rails shall be

made out of FRP notch bars of 12mm dia, Pickets shall be made of flats

of size 35x5mm SMC or FRP as per specifications

Paint Pointed Letter 2 inch size(Marking on FSP, MSP, SFU Etc In any

palce.(As per directive of Engineer Incharge) with supply of color

27 HRC Fuse and its Fuse base(Spare)

28 Jointing Kit for LT Cable

Total LT-UG (Supply+ Erection) 292611073 59230299