Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹42.0 L+₹1.2 L (2.97%)Rejected-AOC KUCHHADI VADI VISTAR PORBANDAR GUJARAT 360579 | PORBANDAR | GUJARAT | 360579 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹42.9 L+₹2.1 L (5.26%)Rejected-AOC HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹44.6 L+₹3.8 L (9.35%)Rejected-AOC HQ CWE AHMEDABAD | GANDHINAGAR | GUJARAT | 382006 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹45.0 L+₹4.3 L (10.4%)Rejected-AOC 10 2 PARAS SOCIETY PANCHVATI JAMNAGAR GUJARAT 361008 | JAMNAGAR | JAMNAGAR | GUJARAT | 361008 | L5 | Rejected-AOC REJECTED |
Tender Value
Refer Docs
EMD Value
₹77,000
Closing Date
14 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I CG PORBANDAR
Military Engineer Services, GE I CG Porbandar, DHQ No. 1, Opp. Birla Cement Factory, Porbandar-360575
PROVN OF ENTRANCE GATE FOR CGOM COMPLEX WITH MANUAL BARRIER AT CGDHQ 15 OKHAUNDER GE I CG PORBANDAR
2023_MES_577320_1
8849
Open Tender
Civil Works
Item Rate
180 days
OKHA
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE I CG PORBANDAR
₹77,000
Yes
13 May 2023
25 Jan 2023
15 Feb 2023
25 Jan 2023
14 Feb 2023
8 Feb 2023
Amount
SCHEDULE 'A'
Surface excavation n.exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil complete all as specified.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm area on plan and n exc 1.5 m in depth and getting out Hard/Dense soil all as specified.
Removing excavated material exc 50 m but n exc 100m and depositing where directed at a level n.exc 1.5m above the starting point as in soil complete as specified.
M&L for Plain Cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in ,sub base of foundation complete all as specified.
M&L Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished surfaces of concrete complete all as specified.
M&L for Use and waste of formwork to sides and soffits of beams, lintels, including supports,overhangs, etc, also slpays between floors and beams, etc.and the like for rough finished surfaces of concrete.
M&L for Use and waste of formwork to the sides of columns for rough finished surfaces of concrete.
M&L for RCC M-30 design mix (using 20mm garded stone agg) as in foundation, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.,basement slabs, under reamed piles and mass concrete, complete all as specified.
M&L for RCC M-30 design mix (using 20mm graded stone agg) as in column, pillars, piers, posts and struts etccomplete all as specified
M&L for RCC M-30 design mix (using 20mm garded stone agg) as in beams,cantilevers, bands, coping,bressummers, lintels and the like complete all as specified.
M&L Mild steel TMT CRS bars 10 mm dia and over cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified.
M&L Mild steel TMT CRS bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified.
Material and labour for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.complete all as specified.
M & L for preparation of new steel surfaces of any descriptuion over 10cm width or girth not otherwise described and applying two coat synthetic enamel paint over a coat red oxide zinc chrome primer complete all as specified.
Supplying,fabricating and fixing ACP (Aluminium composite panel) cladding (for all height) in metallic/non metallic colour of approved shade made out of 3 mm thick aluminium composite panel material consisting of 2 mm thick mineral core sandwitched between two aluminium sheets (each or 0.50 mm thick)fixed over and including base frame fabricated with aluminium square pipe of size 25 mm x 20 mm with 1 mm wall thickness in 600 mm x 600 mm size grid including stainless steel screws,nut,bolts,washers,cleats,weather silicon sealent for groove filling,backer rods etc., complete all as per manufacturer instruction and as directed
Supplying and fixing stainless steel sheet of grade 304,one mm thick as in letters/numbers in Gujarati/Hindi/English not exceeding 45 cm height on vertical Aluminium composite panel sheets surface, granite ,tiles,wall surfaces (for all heights)with stainless steel screws, adhesive including cutting chases,grooves,drilling holes complete all as directed
S&F fabricated stainless steel wok sitting benches made out of stainless steel pipe of grade SS 316 with bright polish surface, as per the pattern approved by the Engr-in-Charge complete all as specified.
M&L for customizing, fabricating glow sign board consisting of letters of size 300 x 500 x 50mm, 29 Nos (COAST GUARD OFFICERS MESS COMPLEX) in Time Roman style and 2 Nos LOGO of size 600mm consisting 2mm thick aluminium sheet with front face covered with retro reflective thermo acrylic sheet and providing LED lights with driver in each letter and logo and fixing over ACP sheets at any height as wiring, control panels, complete all as specified and as directed .
M& L for Pre-cast cement concrete 1:3:6 type C1 using 20mm grade stone aggregate as in kerbs set in cement mortar 1:6 with plain fair faces,including chamfers,weatherings,throating etc., complete all as directed.
M & L for hard core (broken stone or boulders) of guage n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified.
Sand filling under floors including watering and consolidation complete all as specified and as directed
M & L for providing chequered cement concrete tiles with mixture of white and grey cement in equal proportions and no pigment 300 mm x 300 mm x 25 mm thick jointed and pointed in neat cement slurry in floors ,over & incl. 15 mm thick screed in CM 1:6 complete all as specified.
M & L for PCC in (1:3:6) type C-2 (using 40mm graded stone aggregate) 75 mm thick as in Sub base etc. complete all as specified and as directed.
M & L for 20 mm thick Granite (of any type) work insteps,jambs,pillars,cills,platforms ,floors and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L for walling of precast PCC solid block masonary in PCC (1:3:6) type C1 built in CM (1:6) bonded and solidly hearted all specified .
M & L for Providing precast cement concrete louvres and jallies, 25 mm thick (measured solid), Type B0 1:2:4 (using 12.5 mm graded aggregate)including all mouldings set in CM 1:4 complete all as specified.
M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick works or concrete surfaces finished even and smooth without using extra cement in any height, complete all as specified and directed.
M & L for providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing as in railing,gates with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.complete all as specified and directed
S&F for Rolled sections as in rafters / purlins where connected to common rafters etc conforming to Fe-410(W) (Gde-E 250) complete all as specified and directed.
S&F for compound girder / single stanchions, built up of one beam or channel section with one plate etc conforming to Fe-410(W) (Gde-E 250) complete all as specified and directed
M&L for Plain cement concrete type B1, 1:3:6 (20mm graded stone aggregate) as bed plates to vertical steel posts, etc including necessary form work complete all as specified and directed.
M&L for vitrified coloured tiles 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.
As per item no 34 above but on vertical surface
M&L for granules textured homogeneous wall finishing system including preparation of surfaces consisiting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymerbonding agent (5 Kg per pack ) with the applied thickness of the coating being between 0.8mm - 1.2 mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied by approved applicator of the manufacturer as per the direction/ supervision of the Engineer -in-Charge, all complete, The above texture coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces complete all as specified and as directed by Engr-in-Charge.Make : Bakelite Hylam Limited or equivalent make approved by the GE
S&F for Dholpur stone work for garden lamp post machine cut edges, polished ,rubbedd ,uniform colour incl. placing and holding in true position at suitable interval of size 1.0 m in height with cross sec. area of each post n. exceeding 0.15 sqm area with suitable arrengment for electic supply for lamp comlete fixed in position with suitable arrengment all as directed by engr-in-chrg.
M&L for Cement concrete 1:2:4, type B1(using 20mm graded aggregate ) in coping ,channels necessary form work and finishing of exposed surfaces of concrete as specified.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.
Returning filling in incl spreading levelling watering and well Ramming in layers not exc 25 cm thick , complete all as specified and directed .
Supply, laying, Jointing and testing XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole complete all as specified and directed for 10 sqmm 4.0 core .
Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 50 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini
Supply and Fix Thermoplastic Junction Box of Landscape Light Fittings of size 155x210x92 -with Terminals and lugs for cable size 10/16 Sqmm x 4 Sqmm with necessaries fittings confirming to IP 66 Protection with metric knock out for cable entry all as specified and as directed by Engineer-In-charge Make :- Hensel/ Neptune/ Rittal/ Hager
Supply and fix LED Post top light fitting ashthetic designed Post top lantern with symmetric light distribution diffuser for uniform illumination with IP 65 protection with Suitable connector shall be provided for LED connection between driver output and LED and Extruded silicon loop gasket shall beprovided in the lantern body to ensure weather proof seal between the UV Glasscover and the metal housing to exclude the entry of the dust, water, insects etc.including Stainless steel stand of suiatable size fixed on existing wall including make good of surface all as specifed and directed. Make: Wipro(LP09S-501-XXX-57)/Philips(BGP161 LED2500/NW PSU 220-240V 7043 IN) /equivalent in crompton
Supply, laying & testing PVC insulated, PVC sheathed cable electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm , 3 core, 1100 Volts grade all as directed by Engr-in-Charge Make: Havells/Plaza/Finolex/Polycab/ KEI
M&L for MCB SPN pole 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 16/32 Amps capacity IP 20 complete all as specified and directed
Supply and fix LED Bollard light fitting 10/11 W Bollard made of extruded aluminium housing to redefine landscapes with better light quality and with soft 360 deg light distribution. Rated IP65. fixed on suiatable size PCC foundation including make good of surface and with Suitable connector shall be provided for LED connection between driver output and LED all as specifed and directed. Make: Crompton (LBLSN-10-CDL)/ Wipro (LB14-131-XXX-65-05) / Philips(BCP150 LED150/WW PSU 220-240V 7043)
Supply and fix Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc
Supply and fix Lamp LED fitting 15 Watt ,warm white, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire all as specified . Make : Philips/Wipro/Crompton
S &F MCB (DB) SPN 6 way double door 415 V made of sheet metal enclosure for MCB's as incomming and SPN/SP MCB as outgoing as spoecified Make: Hager / Legrand/ schneider
M&L for MCB SP 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 6/32 Amps capacity IP 20 complete all as specified and directed
Supply and fix reccessed type downlighter LED fitting 12 Watt ,3000K, Warm white, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire all as specified . Make : Philips(12W Sky COB Tilt LED Spotlight (WW))/Wipro/ Osram
M & L submain wiring with two runs of 1.5 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit and one run of 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable as earth conductor in concealed/surface casing caping but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc complete complete as specified.
M&L for MCB TPN pole 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 16/32 Amps capacity IP 20 complete all as specified and directed
JAY BHARAT METAL SUPPLIERS
Harsh Infrastructure
roxy enterprise
vijay infraprojects pvt ltd
K K Construction Co
M/S. P.M GODHANIYA
JAMNAGAR ELECTRIC AND MACHINERY CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .