Repair/Imp. to Group Latrines/Markets/Public Conveniences etc. in Cantt. Area.

Amount

Earth work in excavation in trenches in soft loose soil n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2010.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2010.

M/L brick work in cement mortar 1: 4 straight or curved on plan exe. 6m mean radius with sub class ‘A’ bricks all as specified in MES SSR 2010.

Except Bricks, Brickwork in C. Mortar 1:4 Straight or curved as plan exe. 6m mean radius removing C.mortor from bricks all as specified in MES SSR 2010

Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230 mm/300 mm thick AAC Blocks in supersturcture above plinth level upto floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for separately.)

M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2010

S/F machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified in MES SSR, 2010. (Excluding screed).

S/F 2nd class Hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR,2010.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings not exceeding 200mm thick (Horizontal or sloping) columns, Beams and similar work fair finished surface all as sp. in MES SSR 2010.

S/F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all specified in MES SSR, 2010.

M/L RCC work 1:1½:3 for slabs supported on walls, beams and columns in floors, roofs, landing balconies, canopies deck slabs, columns, pillars and in shelves and the like all as specified in MES SSR, 2010.

M/L RCC work 1:1½:3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2010.

Ditto, But RCC work 1:1½:3 for walls, retaining structure/tanks for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2010.

S/F of 2nd class Hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. ( without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters all as specified in MES SSR,2010.

S/F 2nd class Hard wood, plain framed, paneled factory made shutter (Two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I ) kiln seasoned and chemically pressure treated all as specified in MES SSR,2010.

M/L PCC floor in cement concrete 1:2:4 finished flooring 40mm thick all as specified in MES SSR 2010.

M/L PCC Floor in c. conc. 1:2:4 rough 40 mm thick all as sp. in MES SSR 2010

S/F Aluminium Frame Made of Aluminium rectangular section (Colour coated)of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for windows, doors & partly fixed, partly openable frame complete all as specified in MES SSR 2010.

M/L PC plaster 12mm thick in cement mortar 1:4,fair finished even and smooth without using extra cement all as specified in MES SSR,2010.

M/L PC plaster 5-10 mm thick in cement mortar 1:4, over RCC surface including water proofing compound all as specified in MES SSR,2010.

S/F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exc. 0.5 sq. m in each pane all as specified in MES SSR,2010.

M/L glazed ceramic tiles 300mm x 300mm or 450mm x 300mm x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2010 (colored tiles) including screed 15-20 mm thick

M/L glazed ceramic tiles 300mm x 200mm or 300mm x 300mm x 7mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2010( colored tiles).

M/L painting 2 coats with synthetic enamel & one coat of Primer after preparing existing surface on wood work/steel/brick work all as specified in MES SSR, 2010

Heritage Granule finish/rustic finish application of one coat of quartz primer of spectrum or equivalent and application of granules of desired shade with trowel and top coat of transparent silicon to make surface water repellent all as sp.

Supply and fixing of G.I. pipe 15 mm dia laid in trenches/fixed to walls medium grade complete all as specifeied.

Supply and fixing of G.I. pipe 20 mm dia laid in trenches/fixed to walls medium grade complete all as specifeied.

Supply and fixing Rotational moulded water tank 1000 ltr. Capacity triple layer ISImark complete with float valve & gate valve 3/4 " complete all as specifeied.

Supply and fixing of framed work such as grills, grating, catttle traps etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters, trusses, MS bar fencing, walk wais, railings, frame work of water tanks and similar work confirming to Fe-410-0 or Fe 310-0 all as specified in MES SSR 2010.

M/L cement concrete interlocking block/tiles (M-35) vibrator moulded, 60 mm thick of shape as per sample in Cantonment Board office, colored & gray tiles (Cosmic, Hexa, Combo paver etc.) laid over sand 25 to 40 mm all as sp. In MES SSR 2010.

Taking down old indian water closet and fixing new water closet (indian orrissa pattern) with PVC flushing cistern 10 ltr. Waste pipe, PVC connection, Angle valve 1/2" brass incluidng cleaning old seat area as per reqd.

Supply and fixing of Stainless steel FE- 304, heavy weight cutting welding etc. 75-80 mm dia complete all as sp.

Supply and fixing of Stainless steel FE- 304, heavy weight cutting, welding etc. 40 mm dia complete all as sp.

S/F of pre-painted galvalume aluminum zine coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified in MES SSR 2010.

S/F of Steel raililng with pillar 4" dia round at a distance of 7' (FE-304) and top bar 1 1/2" dia, middle and bottom bar 1" dia finished to top quality as per sample including fixing in C.Conc 1:1.5:3 and hold fasts at bottom. Earth work in holes, PCC bed 1:4:8 cement concrete 1:1.5:3. (size 1'x1x' 2') complete all as sp.

M/L walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 all as specified in MES SSR 2010. (Note:- Only OPC cement will be used for works)

Bidder Name

Amount

R.N.Company(GSTN-06AJPPK4897H1ZK)

M/s A N BUILDERS(GSTN-06AADFA9365M1Z2)

kulwant singh(GSTN-06ADZPS2056C1ZA)

Shivani Constructions(GSTN-06ASDPS8464M1Z0)

om jagdish builder(GSTN-06AAEFO2949J1Z1)

Swastik Builders(GSTN-NA)

tandon construction works(GSTN-NA)

tandon construction works

Shivani Constructions

kulwant singh

R.N.Company

om jagdish builder

Swastik Builders

tandon construction works

Shivani Constructions

M/s A N BUILDERS

Swastik Builders

R.N.Company

om jagdish builder