Supply, Erection and Commissioning Of 9MTR Casted Designer Double Arm Pole With 120w X 2 Smart Led Light, 120w X 2 Iot Based Smart Solar Hybrid Light with CCMS Control Panel SITC for Shiv Murti Chowk Bus Stand Divider to Arya Nagar Chowk Haridwar in

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ramming and watering, all complete as per drawing and direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and 4 shuttering -All work up to plinth level:1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Shuttering and centering forR.C.C. Structure all required work 7 including all cost ofT & P etc. complete work as per building specification and direction of El.

Supply of P.U Painted 9 Mtr. Decorative Pole are made out of G.l Steel Tubes as per MS Base Plate Dia. OD 400 x 12mm, & Alu. Iron Casting on joint, inbuilt Control Box at the bottom of the pole for space for Housing MCB & Terminal strip etc. Specification of Pole Sections: 1st Section 165mm (O.D) x 2000mm (Length) x 3.6mm (thickness) combined 2nd Section 84mm (O.D) x 5000mm (Length) x 3mm Grooved Pipe (Thickness) With Polyurthane Painted color shade Glossy (Black & golden/Copper Golden). Arm Section 60mm (O.D) x 2000mm (Length) x 3mm (thickness) As per Drawing With Arm Total length of pole is 9Mtr.