Under Ground Tank 40000 liters Capacity at village Thathri

Amount

Excavation in foundation,trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting hard of soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water within all heights, stacking the excacated soil within all leads clear from the edge of excavation and then returning the stacked soil in 150 mm (fifteen centimetres) layer when required into plinths, sides of foundation consolidating each deposited layer by remming and watering and then disposing of all surplus excavated earth complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Laying Cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing form work with steel plates 315 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden bottens and ballies, height of propping etc. and centering below supporting floor to ceiling not exceedin 4 meters and removal of the same for in-situ reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls (only thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Beams, cantilevers, girders & lintels etc.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtrs. In depth in all heights from floor complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing form work of ordinary timber planking so as to give a rough finish including centring, shuttering and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in-situ-reinforced concrete and plain concrete work in:

Arches upto 6 mtr span complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Laying cement concrete work 1:1/12:3(1cement:1/12 sand: 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work:-

In foundation and plinth complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Suspended Floors, roofts landing and shelves and their support balconies beams girders bressumers and cantilevers Upto Floor 2 Level complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing steel work welded in built upto sections bruses and framed work including cutting, hosting fixing in position and applying a priming coat of red lead paint in gratings framed quard bars, ladders, railling brackets and similar works in all respect including all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing & fixing of Cast Iron manhole cover 550 mm dia with frame (Medium Duty) total weight of frame and cover not less than 58 Kgs. complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Providing, fixing, Laying and galvanized wire Masquito proof ventilator size 400 mm dia and 300 mm in hieght with frame of M.S. angle iron 40x40x6 mm complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Laying, jointing & testing of GMS (plan ended pipe) with 100% flanged joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Inlet, Over Flow, Byepass, Outlet & Scour Pipe 100mm dia

Providing and Fixing Cast iron Sluice Valve Kirloskar Make of various dia (with hand wheel) PN-1 as per BIS 786-1984 latest upto date ammendments standard make with bols, nuts, rubber insertion etc. (The tail pieces if required shall be measured & paid for separately) complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

100 mm dia

Finishing walls with water proofing cement paint of approved brand and manufacture of required shade on undecorated wall surface ( two coats) to give an even shadeafter throughly brushing the surface to remove all dirt and remains of loose prepared material complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Extra cost for providing and mixing polyester triangular synthetic fibrec in spoecified ration 6-18mm length designed for melting point 240-260 degree centigrade and having specific gravity of 1.33-140 as per IS 456 ammendment August 2007 and IRC 44-2008 @ rate of 125 grams per 50 kg. of cement beg in all types of CC, RCC, plastering and flooring work ect. complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

SATISH KUMAR

ANKUSH KUMAR