CA NO.CWE BLY/GE (W) /86 OF 2024- 2025SPECIAL REPAIR TO BLDG NO RA-1 LINE OF HQ UB AREA UNDER GE (WEST) BAREILLY

Amount

M & L for double charged vitrified /HD Polished /Marble finished light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile exc. 0.42 Sqm but n. exc. 1.00 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screeding 15mm thick in CM 1:6 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of rubbish from the permises of site to low lying area complete all as specified and directed.

M & L for double charged vitrified/HD Polished /Marble finished light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile exc. 0.42 Sqm but not exc 1.00 sqm as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including plastering 10 mm thick in Cement Mortar 1:4 and dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), including removal of rubbish from the permises of site to low lying area complete all as specified and directed.

M & L for non/anti- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of tiles complete all as specified and directed.

M & L for colour glazed vitrified /HD Polished /Marble finished coloured tiles in vertical surface 600x600x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and directed.

M&L for 20 mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 including pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone, moulding of edges complete over and including 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete incuding hole for gas pipe complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.

M & L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed.

S&F false ceiling at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including taking down old ceiling complete all as specified and directed.

Supply only liquid waterproofing compound conforming to IS specifiecation complete all as specified and directed

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair or as specified or as directed.

M & L for Plain Cement Concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed blocks for hold fast and similar work etc including necessary form work complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

M & L brick work with fly ash bricks (old size) conforming to IS 12894 -2002 specification straight or curved on plan exc 6 Mtr mean radius built in CM (1:6) complete all as specified and directed

Removing Cement mortar or cement lime mortarr from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

M & L brick work with fly ash bricks (old size) conforming to IS 12894 -2002 specification straight or curved on plan exc 6 Mtr mean radius built in CM (1:6) except brick complete all as specified and directed

Taking down cement plaster from wall / ceiling of any description including terrazzo tiles, skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.complete all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 3% per 50 kg of cement newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (On internal surfaces) in cm (1:6) including finishing the surface even and smooth without using extra cement all as spd and directed

M&L for preparation of old decorated surfaces of walls and cornices by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying min 3 mm thick of white cement based wall care putty including sand papering the puttied surfaces to form an even and smooth surface, and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying min 3 mm thick of white cement based wall care putty including sand papering the puttied surfaces to form an even and smooth surface, applying a priming coat of exterior primer over new or untreated plastered surfaces with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, and finally applying two coats of weather proof exterior emulsion paint of five different shades in camouflage pattern (Specific pattern as directed by Engineer-in-Charge) by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying min 3 mm thick of white cement based wall care putty including sand papering the puttied surfaces to form an even and smooth surface, and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and cornices by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying min 3 mm thick of white cement based wall care putty including sand papering the puttied surfaces to form an even and smooth surface, and applying two coats of oil bound distemper paint over and including priming coat of exterior primer over new or untreated plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L dismantling , taking out and removing existing on serviceable plaster loose/unsound weaken cement concrete etc. M& L for applying one coat of epoxy resin (FAIR BOND EP FAIR BOND EP OF fairmate construction chemica) on old concrete surfaces of ceiling and beams, chajja, staircase etc @ 0.30 Kg per sqm including preparation of surfaces as per manufacturer instructions complete and applying 25 mm thick (average thickness) of cement and sand (Fine grit) in ratio 1:3 mixed with chloride free spray concrete plastriciser (spay crit )as per manufacturer instruction with guinting machineof pressure capacity not less than 5 Kg per sqcm and finished the surface even and smooth complete all specified and directed.

M&L for preparation of new plastered surfaces of ceilling and applying min 3 mm thick ofof white cement based wall care putty including sand papering the puttied surfaces to form an even and smooth surface, and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1sqm and not exc 2 sqm each complete all as specified and directed

S&F Pressed steel frames of size 105mmx60 mm (using 1.25 mm thick PBI sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including cutting holes and making good in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and filling of PCC 1:3:6 type C1(using 20 mm graded stone aggregate) complete all as specified and as directed (Note : 10mm deformed bar shall be provided in bottom portion in each frame. The rate for the same is included in rate quoted against this item.)

S&F for 35 mm thick factory made wooden Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F sheet glass of 3mm,ordinary quality and glazing with oil putty or wooden beading in squares n.exc 0.5 Sqm in each pane,complete all as specified and directed.

S&F galvanised mild steel wire cloth 0..56mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed

S & F in replacement floor door stopper of aluminum alloy body and tongue, overall length of cover plate 140mm, anodised with hard drawn steel spring, overall length suitable for aluminium door/ wooden door complete all as specified and directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and directed.

Supply and fixing 30 mm thick Fiberglass ReinforcedPlastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P.laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and directed.

S&F for steel ventilators with top hung shutter including hinges, steel peg stay with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

Taking up or down steel tubing and connections, including cleaning for refixing removal to store bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing removal to store bore of pipe 20mm complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, ceiling,floor etc.) bore of pipe 15mm complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, ceiling,floor etc.) bore of pipe 20mm complete all as specified and directed.

M&L for cutting chases,for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed

S&F tubes ‘medium’ grade galvanized with and including all fittings fixed complete to walls and ceiling or laid in floor.bore of tube 15mm complete all as specified and directed

S&F tubes ‘medium’ grade galvanized with and including all fittings fixed complete to walls and ceiling or laid in floor.bore of tube 20mm complete all as specified and directed

S&F in replacement tubular, towel rail brass chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed

S&F in replacement 25mm dia stainless steel decorative curtain rods of any pattern, design & colour with end fittings and brackets complete all as specified and directed.

S&F in replacement for A Vitreous china wash down water closet (Pedestal Pattern) EWC white (excluding flushing cistern & flush pipe) complete in all respect all as specified. or as directed..Make Jaquar CNS-WHT- 551SSPP/CERA -S1053101/HINDWARE-20044.

S & F in replacement Single piece WC with UF Soft Close Slim Seat Cover , Hinges, Dual flush Cistern Fitting, fixing Accessories , size 360x655x765 mm, including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed..Make-JAQUAR CAT- LYS-WHT-38851P180UFSM, CERA CAT-A1014112

S&F in replacement censar enable vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed.Make-JAQUAR CAT- URS-WHT-13255 CERA CAT-S4010101, ,Kohler -Cat -K4991ER0

S&F in replacement Vitreous China Ware Urinal partition slabs 310x700 terminating about 40 cm above floor line complete all as specified and directed.

S&F in replacement for PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete all as specified or as directed..Make CERA- 2603/Kohler K-20440219955/Hindware- 12927719891

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed. Make Jaquar CON-047KN/Kohler K-16093 IN-4-CP/Grohe-20280000 Approved Make and Sample by GE.

S&F in replacement 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed..

S&F CP heavy duty extension pieces 15mm bore and 25 mm long as specified and directed

M&L in replacement Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position coomplete all as specified and directed. Make Jaquar ALS-565/KohlerK-77364-In-CP/Grohe 26355110.

S&F in replacement grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S & F in replacement fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Make Jaquar CPA-Chr-1171/ Kohler K - 5636-IN-CP/ Grohe-40799001.

S&F in replacement Vitreous china wash basin white flat back of size 550mm x 400mmx excluding tap, waste, chain & plug but including brackets complete all as specified and directed Make Jaquar FLS-WHT-5801/Kohler K-24562/Grohe-P04-PAR-c042MIC.

S&F in replacement waste fitting 32 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed

S&F in replacement 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed..Make-JAQUAR CAT- COP-005BPM, CERA CAT-F1005101GG

S&F in replacement chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed.

S&F in replacement chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed. Make Jaquar CNS-WHT- 551SSPP/CERA -S1053101/HINDWARE-20044

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified and directed

S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed.

S & F PVC (SWR) 110 mm bore bends complete all as specified and directed.

S & F PVC (SWR) 75 mm bore bends complete all as specified and directed.

S & F PVC (SWR) 75 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid as in floor or fixed on wall complete all as specified or as directed.

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks three layered in white colour(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified & directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed

S&F in replacement PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M & L in replacement for PVC (SWR) floor trap/Nahani Trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed. ( Shape and size of section will be approved by GE/as per Drg) (Note ;cost of rubber and required accessories shall be included in the rate of item and shall not be paid extra. )

M & L Aluminium powder coated anodized partition frame work frame of size 62.5mm x 37mmx1.1mm thick /100mm x 44 mm x1.1 mm thick with bottom and middle rail of section 62.5 mm x 37mm x 1.1mm thick/100mm x 44 mm x1.1 mm and style, top rail section of 62.5mm x 37mm x 1.1 mm thick /100mm x 44 mm x1.1 mm including joining cleats, Fixing of glazing with 5.5 mm thick tinted glass or 5 mm thick aluminium composit panel including rubber beading complete all as specified and directed.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick tinted glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below, and following items deemed to include- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) Aluminium grill with Bulb height 4.5 mm square shape fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed by Engr-in-Charge. (v) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (vi) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vii) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) fixed in vertical position with aluminium vertical members and specified thick tinted glass including rubber beading and aluminium glazing clips complete all as specified and directed

S&F Powder coated anodised Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of french polish complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applyingne two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coat of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S & F in replacement 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F stainless steel butt hinges 100mm size cold rolled medium weight ISI marked and fixed complete all as specified and directed.

S&F 250 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S&F Prelam PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more thant 200 mm. The strips shall be fixed to wall vertically at an equal interval of 10" between two PVC strips. A strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be stuck at the places where two panels are jointed, using solvent cement and including taking down existing PVC wall paneling complete all as specified and directed.

Demolition of cement concrete (Unreinforced) of Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed.

S&F Steel framed work with hollow MS tubular section including special shaped washer etc. complete using induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F in replacement wire netting ( Mesh size 12 mm ) of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab where required/directed by Engr-in-Charge after applying cement slurry for filling undulationations/ level course finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement including application of cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.

M&L 125mm dia grating with waste hole of PTMT (min Wt 40 gms complete all as specified and directed.

Demolition of cement concrete (unrinforced), in ground floor and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M&L 25mm thick cement concrete type B1, 1:2:4 (using 12.5mm graded stone aggregate) as in floor finishes even and fair to receive floor tiles complete all as specified and directed.

M & L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M& L for out door vitrified tile 400mm 400mm even finished on top of approved design and pattern over and including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes with grey cement and pigment complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L form work to edges of concrete rough finished surface flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slab, shelves and stair case etc. complete all as specified and directed.

M&L RCC type B 1, 1:2:4 (using 20mm graded stone aggregate) as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and directed

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in chajjas and like all as specified and directed.

S&F in replacement of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose Soil complete all as specified and directed

Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 150 mtr above the starting point complete all as specified and directed

Returning filling in,including spreading,levelling,watering and well ramming in layers n exc 25cm in soil complete all as specified and directed.

M&L for Hardcore of broken brick of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specifid and directed.

M & L for Plain Cement Concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in surface chanel and drain work etc complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 100mm dia complete all as specified and directed.

M&L Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M & L for precast reinforced concrete 1:2:4 type B1( using 20 mm graded stone aggregate) as in cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed.

M&L for PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as in levelling course, haunching, coping and similar works of over cills parapet surface including rounded or chamferred on edges etc complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for chicken wiremesh fixed to wall with necessary screws of appropriate size complete all as specified and directed

M&L for 3 mm thick ACP sheet of any colour as approved one side covered with retro-reflective sheet cut to side including necessary fixing arrangement in GI frame 75x45mm fixed to wall or appropriate size complete all as specified and directed.

S&F in replacement fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed. Make/Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2002461, Asian Paints Cat Part No MMCH101 & Kerovit Cat Part No :- KB1211026.

S&F in replacement fancy type brass chromium plated toilet paper holder complete all as specified and directed Make : CAN -11535/Kohler K-5633-IN-CP/Grohe-40367001.

S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed Make : AON 1131N/Kohler K-5634-IN-CP/Grohe-40754001.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, bell push except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking out old sub main copper/aluminium cable off various sizes from existing conduit/ batten complete all as specified and directed.

Taking down old MCB DBs/ main switches of any size and capacity complete all as specified and directed

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories and also suitable for modular switches and sockets and cover platate & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed for the following :- (a) One light/fan point controlled by one switch

(b) One 3 pin, 5/6 Amps, socket outlet on the same board, controlled by another switch.

(c) One multi pin socket outlet, 5/6 Amps, on Independent board.

(d) One point controlled by bell push

M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories and also suitable for modular switches and sockets and cover platate & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed.

S&F,Modular switch 1 way 16A, 1 module, single pole, complete all as specified and directed

S&F,Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed

S&F,Modular switch 6A, 1 module, single pole, one way, complete all as specified and directed

S&F, Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed

S&F Modular Bell push 6A 1 module complete all as specified and directed

S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F call bell complete all as specified and directed

S&F TV socketout let single complete all as specified and directed

S&F RJ 11 tel jack sigle with sutter complete all as specified and directed

S&F USB type A fast charger 1M 18 Watt complete all as specified and directed

S & F of following factory made V TPN DBs-DPX-160 MCCB DB's, IP-43 protection-IK09 with metal door with 160 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 MCCB and incomer and SP/TP MCB's as outgoing 4 way etc complete all as specified and directed.

S&F MCCB 63 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified and directed. Make :- Legrand, Schneider, Siemens

S&F sheet metal distribution board, SPN, 8 way 240 Volt,double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.

S&F, in replacement, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.

S&F, in replacement, miniature circuit breakers, SPN, type curve‘C’ 10KA, 32 Amps, 240 Volts. complete all as specified and directed.

S&F, in replacement, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F, in replacement LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

Supply and Fix in replacement PVC Deco type round light incl LED lamp 7 watt complete all as specified and directed.

Supply and Fix in replacement Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. for fixing in wall of suitable size and length of bracket not less than 1.2 mtr complete all as specified and directed. (Note:-Cost of bracket,clamps and nut bolts included in quoted rate.)

M&L in replacement of earthing materials for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc complete all as specified and directed .

S&F sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded,4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

S&F, sub-main wiring with 2 single core, 10 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded, 10.0 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

S&F sub-main wiring with 2 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded, 6 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

S&F, sub-main wiring with 4 single core, 16 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 50 mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded, 16 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. all as spsecified and directed

S &F sheet metal enclouser with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed.

Taking down carefully ceiling fan from existing site and re-fixing the same after repair/serviceing/replacement of defective parts including rewinding of ceiling fan with copper wire and one coat of duco paint through spray manchine complete all as specified and directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fixed Rigit non-metallic PVC conduit of external dia 40mm exclusive of boxes (Junction/terminal) but inclusive of all tees,bends, elbows, reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc copmlete all as specified

Supply and fixed Rigit non-metallic PVC conduit of external dia 25mm exclusive of boxes (Junction/terminal) but inclusive of all tees,bends, elbows, reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc copmlete all as specified

Supply and fixed Junction boxes(1 to 4 way) suitable for 40 mm pipe copmlete all as specified

Supply and fixed red and green engagement office LED light complete all as specified

Builders Harpal (BID ID -3250166)

UTTRAKHAND BUILDERS (BID ID -3249783)

M/S ARORA ENTERPRISES (BID ID -3250248)

Shikhar ji Enterprises (BID ID -3250306)

MOHINDER SINGH AND SONS (BID ID -3250164)

Ikrar khan & co. (BID ID -3250169)