EI Works

Amount

Compound Light S & F 72 watt LED fittings (Make CENTURY MAGIK CAT NO. SPOR072C / PHILIPS / WIPRO) incl. all accessories on wall mounted light.

S & F 90 watt LED fittings (Make CENTURY MAGIK CAT NO. SPAI090C / PHILIPS / WIPRO) incl. all accessories on wall mounted light.

Supply , Deliver and Painting of 9 M ST Pole of length upto 9 mtrs. Long with 2 coat of Al. Paints over one coat of R.O. primer after cleaning the pole surface by sand / emary paper etc. for receiving the fresh coat of paint. (existing 2 no pole)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

S/ Erection of 1.5 mtr long 40mm dia detacheble Single Arm Bracket on 80mm dia ST pole including painting with all require accessories.

Providing CC (6:3:1) muffing 600x600x700 mm in size or equivalent size cylindrical muffing above groung floor level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the un-servicable muffing if necessary. (without loop Box).

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. paintin

Supply & laying 3x1.5 sqmm PVC insulated and unsheathed copper wire froom loop to S.V fittings.

Supply & delivery of 1.1 KV Grade 2 core 6 sqmm PVC/A Al cable (armoured) (gloster/havells)

Laying of one No. cable upto 6 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 2 core 6 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

Supply & fixing compression type gland complete with Brass Gland, brass ring & rubber ring for dust & moisture proof entry for 2 core 6 sqmm PVC/A

Finishing the 2 core 6 sqmm PVC/A Al; cable ends by soldering with Cable Socket & insulated tapes etc. incl. supply socket soldering materials, tapes etc & making connection.

S/ Erection of 80mm dia 2 m ST mini pole & 1.5 mtr long 40mm dia detacheble Single Arm Bracket including painting with all require accessories. MAKE Calcutta poles & Tubes Co.

S & F 25A timer controller in SS double door phosphatised powder coated 12 way SPN DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection, a) 40A DP MCB Isolator (10kA, C curve)—1no,MCB housing should be thermostat materials( fire retardant). b) Daily & weekly programmable basis digital time switch, min switching time 1 min, 25 ON/OFF programs,6 yrs. Battery backup, settable DST & key pad lock features. Cat no. – 67DDT0. D) 8 WAY SPN DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility, 1 no, (Make Hager, L & T, Schneider/ Crabtree) (For compound light)

S&F of earth bus bar as to GS

S&F 10 SWG GI wire as ECC

S/ Erection of 80mm dia 2 m ST mini pole & 1.5 mtr long 40mm dia detacheble Single Arm Bracket including painting with all require accessories. MAKE Calcutta poles & Tubes Co.

Providing CC (6:3:1) muffing 600x600x700 mm in size or equivalent size cylindrical muffing above groung floor level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the un-servicable muffing if necessary. (without loop Box).

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. paintin

Supply & laying 3x1.5 sqmm PVC insulated and unsheathed copper wire froom loop to S.V fittings.

Supply & delivery of 1.1 KV Grade 2 core 6 sqmm PVC/A Al cable (armoured) (gloster/havells)

Laying of one No. cable upto 6 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 2 core 6 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

Supply & fixing compression type gland complete with Brass Gland, brass ring & rubber ring for dust & moisture proof entry for 2 core 6 sqmm PVC/A

Finishing the 2 core 6 sqmm PVC/A Al; cable ends by soldering with Cable Socket & insulated tapes etc. incl. supply socket soldering materials, tapes etc & making connection.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as by TATA-Medium GI pipe

S & F 25A timer controller in SS double door phosphatised powder coated 12 way SPN DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection, a) 40A DP MCB Isolator (10kA, C curve)—1no,MCB housing should be thermostat materials( fire retardant). b) Daily & weekly programmable basis digital time switch, min switching time 1 min, 25 ON/OFF programs,6 yrs. Battery backup, settable DST & key pad lock features. Cat no. – 67DDT0. D) 8 WAY SPN DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility, 1 no, (Make Hager, L & T, Schneider/ Crabtree) (For compound light)

S&F of earth bus bar as to GS

S&F 10 SWG GI wire as ECC

S&F of earth bus bar as to GS

Earthing with 50mm dia medium GI pipe (TATA make) as to GS

E.I Work for Lift Supply & installation Cubical type wall mounting control panel for operation of lift , compriseing 63 A TPN Main switch incoming and 32 A TPN Main Switch - 2 Nos., 32 A DP Main Switch 1 Nos. as outgoing , 100A 4 Bar Copper Bus bar Chamber, 3 nos. LED Phase Indicator Lamp all accessories consist in suitable size enclosure with necessary connection / Painting etc. as required. All Main Switch L & T make. DP Main switch Havells.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC Rigid conduit pipe [for celling portion only], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with piano type switch (Brand approved by EIC) fixed on MS switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on Celling and remaning portion concealed ] as per GS [Average run 6 mtr]

S & F 250V, 6-10A per way, 2 + 4 way SPNMCBDB with SS enclouser double door with IP- 42/43 protection with 40A DP Isolator as incomer & 4 Nos. SP MCB's ('C' Curve, 10kA) as outgoing concealed in wall after cutting the wall and mending the good damages to original finish incl. Inter connection with suitable size of Cu. wire and neutral link and provision for earthing attachment as to G.S. (Make: Siemens/ Legrand/LT).

S & F 250 volt 6 Pin 5/15A flush type plug socket with 15A piano key type switch fixed on 3 mm thick bakelite top cover on 7" x 4" M.S. Box incl. earthing attachment incl. S & F M.S. Box & bakelite top cover & necessary connection to G.S.

Supply & drawing 1.1 KV grade single core stranded 'FR' PVC insulated unsheathed Cu. Wire (approved make) in 20 mm size PVC Rigid conduit pipe on wall complete with all accessories incl. and mending good the damages.

i) 2 x 1.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

Supply & Fixing 15 A piano key type control switch on MS switch board incl. supply and fixing 4'' x 4'' MS box and Top cover .

S & F 7'' x 4'' MS box consisting 3 nos. copper connecter bar fixed on bakelite chair. With bakelite Top cover. ( For inter connection group control system )

Supply & Fixing 6 Watt LED Round light Philips Make CAT No.DN091B LED6S-6500 PSU WH

S&Fixing 230mm dia 1400rpm heavy duty exhaust fan [EPC / CG make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust.

Supply and fixing 18'' wall mounting Metal bracket Fan with allied accessories (Make Orient Tornedo wall Metal)

Supply and fixing LED Bulk head fittings 09 watt with all requer accessories. MAKE- Philips WT202W LED6S NW PSU S2 PC

S & Laying of 1.1 KV grade PVC/A armoured cable (approved make). Surface on wall by GI Saddleing as per GS.

i) 4 core 16 sq. mm.

S & F compression type cable gland of following sizes PVC/A armoured cable as per G.S.

i) 4 core 16 sq. mm.

Finishing the end of cable following sizes PVC/A armoured cable by crimping method as to G.S.

i) 4 core 16 sq. mm.

Allied work for D.G S & F exhaust pipe of 3". dia MS black pipe (Thickness 4 mm) including connection with the existing silencer attached with the flexible coupler and S&F flange, nuts, bolts & washers etc. & necessary fixing materials etc. as required from DG set to nearest building (Horizontal Run) with suitable high temperature painting.

S&F exhaust pipe of 3" dia black pipe (thickness 4 mm.) including S&F flange, nuts, bolts & washers etc. as required from the nearest building wall to top of the building roof. (Vertical run) with suitable high temperature painting.

S&F special type MS angle iron bracket support made of 40x40x6 mm. MS angle with flat iron clamp with nuts, bolts & washers etc. for 3". dia (Vertical Run)

Making insulation by 2" glass wool including netting arrangement and covered with aluminium clading as per direction of the EIC. a) 3" dia exhaust pipe.

Supply and Fixing rain protection canopy.

S& delivery of 100 ltrs. Capacity heavy gauge MS sheet barrel.

Supply of HSD Oil.

Supply of Mobil Oil.

Supply & delivery of best quality oil hand pump with 1" dia PVC flexible pipe (12' ft. approx.)

Earthing with 65 mm. dia GI pipe (ISI Medium) x 3.0 mtr. Long 1 no. 50 x 6 mm. galvanized (Hot dip) sheet strip (4 mtrs. Long) 12 mm. dia x 125 mm. long GI nuts, bolts & washers etc. for neutral earth.

Earthing with 50 mm. dia GI pipe (ISI Medium) x 3.0 mtr. Long for equipment body earth as per GS

Extra connecting the neutral of DG to earth electrode including S&F 50mmx6mm Galvanized(Hot Dip) steel strip on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape.

Hiring charges for scaffolding by bamboo, coir rope by square type arrangement for smooth working and lifting of MS black pipe for vertical installation including dismantling after completion of work.

Commissioning & testing of the Diesel Generator Set along with AMF panel with agency's own tools & tackles in presence of EIC.

Construction of Room by supplying materials, Mason, Labour, Welder and other technician for installation of D.G. Set of room size inner dimension (10'Ft x 6'Ft) of height at the centre point (approx) 8'Ft. of corrugated sheet both side sloping (TATA - Make) of required gauge incl. S&F MS angle iron structure made of 50x50x6mm MS angle for shade structure & to support 100mm dia MS pipe. Incl S&F corogated sheet for shade & painting as per GS. as per direction of EIC.The D.G. room should have a gate with locking arrangement. The entrance gate should be made of (1.5" x 1") Square type hollow bar. The size of the door should be (10'Ft x 1'Ft.10") of 2 part system fixed with big size heavy gauge kabja - 6 Nos. The 5" thick wall all round should be finished with net cement works both side.Making RCC & Brick foundation (10inch brick work) bellow 1mt from GL & 450mm above GL. Of size. 1 mt x 0.6mt incl. 3mm thick neat cement finish on all four sides & top. as to G.S.

Suooly & Laying of cable upto 3.5 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as below : a) 3.5 core 25 sqmm Cable.

Supplying and fixing 415V, 63A , TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (L & T - Make )

Supplying & fixing sheet metal (16 SWG) Iron Clad 415 V, 100/125 A Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) and as to GS.

Supplying and fixing 415V, 63A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. L&T Make

S&D 18" Pedestal Fan (Make Orient Tornedo Metal or equivalent) (Hospital Ward & Superintendent)

Terms and condition The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

M/S INDRADEEP ENTERPRISE

JOGMAYA ENGINEERING

ASIM KRISHNA MODAK