SPECIAL REPAIRS TO CONCRETE ROAD NEAR GE OFFICE AT DEAL AND ADDITION/ALTERATION IN BLDG NO.P-66 OF VIGYAN VIHAR AND PROVISION OF 50 NOS POWER POINTS 16/6 AMO IN VARIOUS LOCATION FOR TELEPHONE NETWORK AT IRDE UNDER GE (I) RND DEHRADUN

Amount

Excavating in trenches, in any type soil not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material soil out side MOD land depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Removing demolished material out side MOD land & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete complete all as specified and directed..

M&L providing reinforced cement concrete 1:2:4b type B1 (using 20 mm graded crushed stone aggrete) as in floor slab/ roof slab, shelves and the like complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 type -B2 (using 40mm graded crushed stone aggregate as in foundation filling & mass concrete , sub base complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in copings/benching of manholes including weathering rounded/chamfered angles and throating as directed including necessary form work. Exposed surfaces of concrete shall be finished even and smooth with out using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds,mi- tred/stopped ends etc complete all as specified and directed.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed..

M & L for 18mm thick Granite stone slab (of any type/Colour ) Slabs machine cut in skirting/dado/ cill and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including rounding to edges cutting and polishing over and including 10mm thick cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing for Granite stone slab complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S & F for 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for 35 mm thick flush shutters, solid core construction, exterior grade with particle board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for fixing mortice locks, latches or other fittings complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S&F 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b)

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh( Two No glazed & one no.wire mesh panels)upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with uilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder oated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and ecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.(Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on is account shall be made.

S&F 100 mm long mild steel butt hinges, medium weight cold rolled including welding if required complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles,cast type anodized D type complete all as specifed and directed.

S&F 125mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 125 mm size aluminium handles,cast type anodized D type complete all as specifed and directed

S&F Harrison rails mild steel chromium plated with fixing brackets stops,rollers etc but of anodised aluminium alloy complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

S & F M.S Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F, M.S work as in Roof trusses (framed) Fe 410-W (Gde -E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle channel or flat sections) including distance pieces cleats etc. complete all as specified and directed.

M&L for Bands, straps, rungs, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as directed. Make :- EVEREST or other equivalent as approved.

M&L 12 mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations complete all as specified and directed.

M&L for non skid coloured ceremic tiles 7 to 8 mm thick (square/rectangular) area of each tilles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry and pointed in colored cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in plinth protection laid in alterrnate panels and finish even and fair complete all as specified and directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less including necessary formwork on side edges and cleaning of demolished surfaces manually/with mechnical compressor complete all as specified and directed.

M&L for Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.

Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150mm thick concrete complete all as specified and directed.

M & L forVirified Ceramic tiles 10 mm thick dark shade double charged/ultracharged (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match with shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Srl item No 41 above but on vertical surfaces such as skirting with and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles with and including complete all as specified and directed.

M&L roubber moulded glosy finished chequered cement concrete tiles coloured (in two different colour) 30x30cmx25mm thick, with grey cement and pigment set and jointed and pointed in neat cement slurry in floors incl and over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Outdoor tiles,first quality( of approved class , colour and design/ shade ) 10 to 11 mm thick( square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, ,as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over with and including 15 mm Screed bed in Cement mortar 1: 6 Complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A/BOQ.

M&L for Rendering 15 mm thick on fair faces of concrete /brick surface in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing new plastered surface of walls and applying two coat of Oil Bound Distemper over and including a coat of alkali resistant primer over 3mm thick damproof wall care putty in two layer complete all as specified and directed.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm over new surfaces external surfaces of wall complete all as specified and directed.

Providing and applying plaster of paris of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for 4.80 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each pane fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed.

S&F table top vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S& F 15 mm bore Pillar taps, cast copper alloy fancy type with capstan heads CP screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe. complete all as specified and directed.

S&F fancy type Pillar cock Hot and Cold mixer with base flange complete all as specified and as directed. Make : Jaquar Cat No. KUB 35001F or equivalent in Parryware/Hindware as approved by GE.

S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F 2 Way Bib tap, cast copper alloy fancy type suitable for 15 mm dia pipes complete all as specified and as directed. Make : Jaquar Cat No KUB-35041F or equivalent in Parryware/Hindware as approved by GE.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms complete all as specified and directed.

S&F fancy type Single lever Basin mixer without popup waste system with 450 mm long braided hoses complete all as specified and as directed. Make : Jaquar Cat No. KUB-35167FB or equivalent in Parryware/Hindware as approved by GE.

S&F 15 mm dia concealed angle stop cock fancy type chromium plated with long shank and cup complete all as specified and as directed. Make : Jaquar Cat No. KUB-35053F or equivalent in Parryware/Hindware as approved by GE.

S&F hand shower (health faucet) ABS body with 8 mm dia,1 mtr long flexible tube &wall hook complete all as specified and as directed. Make : Jquar Cat No. ALD-CHR-593N or equivalent in Parryware/Hindware as approved by GE.

S&F towel ring square complete all as specified and as directed. Make : Jaquar Cat No. AKP-35721P or equivalent in Parryware/Hindware as approved by GE.

S&F stainless steel toilet roll holder with flap complete all as specified and as directed. Make : Jaquar Cat No. AKP-35753P or equivalent in Parryware/Hindware as approved by GE.

S&F Corner glass shelf complete all as specified and as directed. Make : Jaquar Cat No ACN-1173 or equivalent in Parryware/Hindware as approved by GE.

S&F single towel rail 600mm long complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711P or equivalent in Parryware/Hindware as approved by GE.

S & F Soap dispensor with glass bottle complete all as specified and as directed. Make : Jaquar Cat No. AKP-35735P or equivalent in Parryware/Hindware as approved by GE.

S&F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring jounts laid in trenches or in floor.complete all as specified and directed.

M&L 150mm internal dia of pipe salt glazed stoneware drain pipe Grade 'A' laid in trenches and jointed in cement & sand morater 1:1 and testing complete all as specified and directed

M&L for concrete bed in cement concrete 1:4:8 type D-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm bore of pipe complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 roun or 3/4 section) in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching as required complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles,and removal of demolish materials to a distance exceeding 500 M but not exceeding 1000mtrcomplete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified and directed for one light/Fan point controlled by one Switch. Make of cable:Polycab/Havells/Gloster, Make of conduit: Finolex/Polycab/Supreme

All as per Srl item No 80 above but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent omplete all as specified and directed.

All as per Srl item No 80 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per Srl item No 80 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches complete all as specified and directed.

All as per item No 80 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed.

S&F Modular switch piano single pole one way 6 amp complete all as specified and directed. Make -Legrand / Anchor Penta / Crabtree/MK/HPL as approved.

S&F Modular switch piano single pole one way 16 amp complete all as specified and directed Make - Legrand / Anchor Penta / Crabtree/MK/HPL as approved.

S&F Modular bell push, 6 amp 240 volts complete all as specified and directed Make - Legrand / Anchor Penta / Crabtree/MK/HPL as approved.

S&F door bell, AC, 240 volts, single pole complete all as specified and directed. Make - Legrand / Anchor Penta / Crabtree/MK/HPL as approved.

S&F Modular socket outlet 3/5 pin combined 2 module 6/16 amp complete all as specified and directed Make -Legrand / Anchor Penta / Crabtree/MK/HPL as approved.

S&F Modular socket outlet 3/5 pin combined 2 module 6 amp complete all as specified and directed. Make -Legrand / Anchor Penta / Crabtree/MK/HPLas approved.

S&F ceiling rose 3 plates polycarbonate, isolated body complete all as specified and directed. Make - Legrand / Anchor Penta / Crabtree/MK/HPL as approved.

S&F Angle holder, insulated polycabonate body with back plate suitable for batten fittings complete all as specified and directed . Make of holder - Legrand / Anchor Penta / Crabtree/MK/HPL and Make of LED - Havells / Philips/ C&S as approved.

S&F LED lamp ADORE PLUS 9 W B22 CDL 3 STAR LAMP,Lumen out put 950, 6500 K , B22 complete all as specified and directed ,cat No Havells LHLDDBEBBI8R009 950 or equivalent make as approved

S&F modular fan step regulator 120 W 2 module complete all as specified and directed. Make: Legrand / Anchor Penta / Standard/Crabtree as approved.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F in replacement of UNSV MCB distribution board SPN, 240 volts, 4 ways ,powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 42- IK-09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- Note: (i) MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. Make: Legrand or equivalent in Havells/L&T/Schneider/ IndoAsian as approved

M&L of submain wiring 2x4.0 sq. mm +1x2.5 sq. mm earth wire of FR is PVC insulated copper conductor, single core cable in surface/recessed as required of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 32 mm dia with standard accessories in wall/ ceiling/concealed surface etc complete all as specified and directed.

M&L in replacement UNSV of sub main wiring using four single core PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 32 mm dia with standard accessories along-with two run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 10 Sqmm as earth continuity conductor wall/ ceiling/concealed surface etc complete all as specified and directed.

S & F in replacement of unserviceable MCB SPN 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 6 to 32 amps complete all as specified and directed. Make - IndoAsian or equivalent in Hager or Schneider as approved.

S & F in replacement of unserviceable MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete all as specified and directed. Make -IndoAsian or equivalent in Hager or Schneider as approved.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor, complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M/S PUNDIR BUILDERS (BID ID -3149804)

M/S Anil kumar (BID ID -3143045)

Amit Associates (BID ID -3149018)