SITC of New Glow Sign Board at Entry gate of Dakshin Dinajpur District Court

Supply & fixing outdoor type LED Glowsign board made of 3 mm thick ACP sheet (Aludecor/ or pwd approved) finished with approved metallic colour as back ground (colour approved by department) & fixed on Angel Iron structure. The all side fabricated with 20mm square bar with required fixing arrangement. The Specification of the is given below. i) Supply & Fixing special type of imported solid acp letter (thickness 3mm raised 0.5 inch above ACP)fixed on 2mm thick acrylic sheet.All side each letter glows or emits light, ii) LED Colour White, Make-GE / samsung or equivalent, iii) LED Life: 650,00 or above burning hours, iv) Visibility: 100 mtr at least for normal eye, v) Power consumption – 1.5 watt per module(One module consists of 3 Nos of LED), vi) LED Protection- IP 66/67 protection, vii) Power Supply: Input: 100V, AC to 240V AC,4A /2A ; 50/60 HZ, Output:DC 12V, 15A /20A Constant Power Supply.

Supply & Laying of 1.1 KV. Gr. armored XLPE/A Al. LT cable of following. [Make: Polycab/Havells/RR/Gloster]

a) 2 core 6sqmm.

Supply & Fixing waterproof type looping cable box size 300X200X100 mm deep having 4 mm thick comprising of one 215 V 15 A kit-kat fuse unit, one connecter NL on porcelain/ backalight insulator two compression type brass cable cable gland upto 4-core 35 sqmm PVC/A cable and having lined with rubber gasketted CI top cover with brass machines screws etc. earthing terminal with lug on MS stracture 40 X 40 X 5 mm angle base, which is PCC concrete of base foundation 1 ft inside ground and 1.5 ft above the ground level, including S&F 40X5 mm thick, MS clamps with bolts,nuts etc. including painting with anticorrosive paint. (Make sintex)

Sign Board should be fixed on the top of the Pillars on M.S channel and suitable size and number of stay rigidly by nuts, bolts etc. as per direction of E.I supply and fixing M.S fabrication box for holding rectanguler or Round shape LED board with powder coted 50mm X 50 mm X6 mm MS angle for holding Facia and MS flat iron (50mm X 25mmx 10mm) 1 nos 20ft Long Each Support Signboard

Terms & condition: If any defect is arrise within twelve month, contractor should repair this without any cost within seven days.

Please Enable Macros to View BoQ information