Providing Rest room And Amenity Facility for Electrical dept., Workmen

Removal of existing iron door and railing (including frames) etc., and useful material has to be handed over to the Yard Civil R&M section and dispose the un-servicable materials with in a 100M lead etc., complete all as directed by HSL

Demolishing of RR/ PCC/ RCC/ Brick wall in Cement mortar by manually / mechanical means including stacking of serviceable material & handing over of useful materials to scrapyard / YCM Civil R&M section and disposal of unserviceable materials with in a 100M lead etc., complete all as directed by HSL

Constrcution of Random rubble masnory with hard stone in superstructure above plinth level; and upto five level, including leveling up with cement concrete 1:6:12 (1 cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) at required areas, stone issued by HSL to be collected from Colony Maintenance Dept.loading & unloading is in contractor's scope.

Construction of Brick work with common burnt clay F.P.S (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto 10M height in all shapes and sizes in cement mortar 1:6 (1 Cement : 6 coarse sand) including cost of cement (PPC - Ramco), required materials and scaffolding / staging etc., complete all as directed.

Applying putty of total thickness 1mm in two coats of approved brands Birla / JK / Asian to wall surfaces at all heights including applying suitable primer after through scrapping, sand papering and cleaning the old paint surface by manually / mechanically including necessary scaffolding and staging where ever required. Putty shall be finished till a smooth and even surface is achieved etc., complete all as directed.

Apply two coats of premium quality arcylic emulsion paint of interior grade of approved brand like Asian paints (Royal shine) / Berger (silky luxury) and manufacture, Including applying additional costs wherever required to achieve even shade and colour. where ever specified by Engineer including necessary scaffolding and staging where ever required etc., complete.

Providing and fixing anodized extruded aluminium partitions with frame 65 x 40 mm with suitable door, part pannelled and part glazed with ACP Panel sheets / pre-laminated flat pressed particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour of 50 Microns conforming to IS:1948, fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 1.9 ± 0.2 mm wall thickness as per IS:1285, IS:733. Glazing shall be frosted / clear float glass (as per user requirement) of 5 mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays etc) with godrej lokcing arrangement for doors including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required. (overall dimesinons will be measured for payment)

Providing and fixing anodized extruded aluminium Two track two panels sliding window made of frame 62 x 30 mm & sash 40 x 20 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension .Glazing shall be frosted / clear float glass (as per user requirement) of 5 mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures etc) and push lock arrangement for windows with staineless steel screws including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required. (overall dimesinons will be measured for payment)

Providing and fixing aluminium work for ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of having wall thickness of 1.9 ± 0.2 mm approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :