Work of shifting of existing control room and erection, control wiring, yard light, control room electrification, Colony Electrification etc work in new control room at 66kV Kaprada S/S under Vapi AM Division.

SCHEDULE B-1: MAIN ERECTION

Sr. Description of work/Supply Unit Qty. Rate Amount

1 Laying of any size of 11KV/22KV XLPE/PILC cable Mtr 360 138.00

including excavation of trench 300mm wide & 600mm

deep including laying and filling up sand of 100mm

layer from bottom & bricks on three side of cable &

refilling the trench with Murram/soil & ramming etc.

Required bricks, sand, etc. will have to be supplied by

the contractor. Rates are inclusive of shifting of cable

drum to the site from S/S site store. Drum should be

handled only by jacking to avoid damage to cables.

2 Laying of any size of 11/22KV XLPE/PILC cable in Mtr 3250 63.00

ready made cable trench or in open space. Rates are

inclusive of shifting of cable drum to the site from S/S

site store. Drum should be handled only by jacking to

avoid damage to cables. SOR PART-D14

3 Erection of 66KV Equipment/Lighting Mast/ VHF Mast MT 6.31 2491.00

structure including punching of nut bolts. Rates are

inclusive of minor required fabrication and shifting of

same up to erection site from its s/s Store. SOR PART-

4 Installation of earthing strip/ MS round bar in any kind Mtr 400 43.00

of soil except SR/HR Soil as per earthing Philosophy

1)Including digging of 600mm depth and 400mm wide

2) Cutting,bending,laying and fixing of Earthing grid

3) 75x10MM/50x6mm GI strips: Fixing of two bolt at

each stright joints and lap welding, removing oxide

films formed during welding, applying two coats of red

oxide and black powder after welding and applying zinc

rich paints on welded joints.

4)25/32/36/40MM dia MS Rod: Lap welding at each

stright & cross joints, removing oxide films formed

during welding, applying two coats of red oxide and

black powder after welding and applying zinc rich

paints on welded joints.

5) Including supply of red oxide paint, black powder,

HDGI Nuts & bolts as per specification.

6) Back filling of the trench with yellow/ Normal soil.

Structure & Equipment earthing:

1) Including digging of 600mm depth and 450mm wide

2) Cutting, bending as per required shape, laying and

fixing of risers from Grid to structures and Equipments.

3) Lap welding, removing oxide films formed during

welding, applying two coats of red oxide and black

powder after welding and applying zinc rich paint on

welded joints including supply of HDGI Nuts & bolts for

all connections including suporting to structures etc as

per specification.

4) Back filling of the trench with yellow/ Normal soil.

SOR PART-D24-a(b)50x6 mm GI strip/MS round bar

up to and including 25mm

5 Providing Bore type earthing with drilling of minimum No 10 871.00

20 following mentioned depth in Rocky (HR/SR) Soil

as per e of GETCO.1) Work includes inserting

20/25mm dia MS Rod (for 66k MS Rod (for EHV S/S)

in bore depth and to be connect-grid at junction point

by proper welding at both end.2) This includes cutting,

fabrication & welding of flat.3) Refilling and

compression of surrounding areas with Ne ground

enhancement material etc. wherever applicable Soil

strata and earthing design calculation.4) Required G.I.

Earthing strip/ MS rods will be supplied by GETCO

Free of Cost.5) Earthing material like Normal/yellow

soil, ground enhancement material (0.5CMT/Meter

depth),water,etc. shall be supplied by contractor. SOR

PART-D26 (f) 3 Mtr depth

6 (a) Supply, installation, testing and commissioning of No 19 13893.00

maintenance free treated earth electrodes, suitable for

Normal Soil as per drawing no-GETCO/E/STD/P-

021(1 of 2) R3 dated-29.05.2020 and techanical

specifications GETCO/E/TS-Maintenance free earth

pits/R1 dated 04.06.15 for 66/11KV substation with

gound enhancement materials/back filling/grounding

compound as per IEEE 80-2000 clause 14.5(d) and as

per part-7 of IEC-62561 using Copper bonded earth

electrode (With 250 micron copper coating) having

24mm dia(Min) and 3000mmlength which shall be

capable of handling STC of 25 KA-1 sec. work also

includes providing BB masonary Inspection

chamber(Manhole) incl.light type CI cover.

7 Erection of Control Panel relay panel or C/R panel or Per 8 691.00

RTCC panel including grouting of panel, jointing with No.

adjoining panels including required fabrication of entry

of control cables and complete vermin proofing. Job

includes supply of required bolts,nuts etc.and shifting

of panel from S/S site store to work site. joining panels

& entry of control cables and complete vermin proofing.

SOR Part H1- d)66kV

8 Erection of 11KV CB panel of any make including Per 15 2076.00

grouting, jointing with adjoining panels & horizontal, No.

vertical levelling including required fabrication in

control panel or required stone cutting in flooring for

entry of power cable, control cable, including

interpanel wiring and complete vermin proofing. Job

includes supply of required bolts, nuts etc. and shifting

of panel from S/S site store to work site. SOR Part H2

9 -DO- but for LT panel GETCO including fixing of all Per 1 968.00

switches bus bars etc. SOR Part H3 No.

9 -DO- but Erection of Battery charger of any make as Per 1 968.00

per manufacturer's instruction manual including No.

grouting, vermin proofing. SOR Part H4

10 Erection of 100AH, 110Volt D.C. battery set on Per 1 6227.00

wooden/FRP stand as per instruction manual of Set

supplier, including first filling of battery electrolyte,

proper connection of cells and applying,

charging/discharging cycles as per manufacturer's

instruction manual and instruction of EIC. SOR Part

11 Erection of station transformer of 22KV or 11KV/430V, Per 1 2214.00

63/100KVA on its plinth, grouting of foundation bolts, No.

fixing of channels, danger board etc. including

connection with power cable/LV cable terminations

including shifting from S/S site store to plinth as per

instruction of EIC.SOR Part H6

12 Erection of support structure for 11kV Power cable No 2 998.00

termination at 11kV bushing for 10/15/20MVA power

transformer as per Drawing No.:- GETCO/E/06S-

STD/11kV STR-A2-02. 1) Material for supporting

structure will be supplied free of cost by GETCO.2)

Necessary wooden clamps with required nut-bolt-

washers & HDPE rubber piece for packing etc. as per

drawing shall be supplied by the contractor.3) Job also

includes miNo.r fabrication if required as per instruction

of EIC. SOR PART D

13 Erection of support structure for Station transformer as No. 1 2196.00

per GETCO drawing no. GETCO/E/06S/STD/11KV

STRA3-03. Necessary wooden clamps as per drawing

with required nut-bolts-washers & HDPE rubber piece

for packing etc. shall be supplied by contractor. Job

also includes erection of required 11KV LA and DO

fuse and minor fabrication if requires as per instruction

of EIC. DO fuse and 11kV LA will be supplied by

GETCO free of cost. SOR PART D34

14 Providing & fixing Set of following Items on erected Set 2 27303.00

11kV support structure system for power cable of

66/11kV Transformer as per GETCO drawing

No..GETCO/E/06S-STD/SPL-028A, R3, DT-

26.10.2016 and instruction of EIC.

1) Allu. alloy bus bar of size 120X20X2000 mm with

heat shrinkable anti tracking tubing : 03 Nos.

2) 11kV SRI of PCD 127 mm - 12 No.

4) Copper laminated fusion welded flexible jumper of

size 75 X 10 X 600 mm having 2000 Amp capacity :

(4) Bi Metalic Plate (Al/Cu): 03 No.

(5)11kV Heat Shrinkable anti tracking Sleeve on Al Bus

bar of all three Phase: 06 mtrs

(6) Including required GI/SS nut-bolt and washer of

good Quality for fitting support structure.

(7) All live parts shall be coverd with heat shrinkable

MV insulated tape/ sleeve.SOR PART- D-35

15 Fabrication for erection of any L.S. 2 4992.00

Equipment/Structure/panel or anywhere in s/s & F.B. (Max.)

at other end as per Inst. Of E.I.C.SOR Part D-31

16 Erection of 11kV D.P. Structure as per GETCO No. 12 2196.00

Drawing No.: GETCO/E/06S-STD/11 kV STR-A1-01.

1) Job includes erection of 11kV A/B Switches, 11kV

Pl, jumpering between 11kV cable to 11kV bus, etc. on

erected structure.

2) Material for DP structure, AB switches, Pl and

conductor for jumpers will be supplied free of cost by

3) Necessary wooden clamps with required nut-bolt-

washers & HDPE rubber piece for packing etc. to hold

11kV power cable as per drawing shall be supplied by

the contractor.

4) Job also includes minor fabrication if rquired as per

instruction of EIC.

17 Erection of 11kV D.P. Structure as per GETCO No 12 2196.00

Drawing No.: GETCO/E/065-STD/11 KV STR-A4-04.

1) Job includes erection of 11kV A/B Switches, 11kV

LA, jumpering between 11kV cable to 11kV bus, etc.

on erected structure.

2) Material for DP structure, AB switches, Pl and

conductor for jumpers will be supplied free of cost by

3) Necessary wooden clamps with required nut-bolt-

washers & HDPE rubber piece for packing etc. to hold

11kV power cable as per drawing shall be supplied by

the contractor.

4) Job also includes miNo.r fabrication if rquired as per

instruction of EIC.

18 Stringing of Single ACSR Dog bus between 11kV D.P. Set of 12 4786.00

Structure (A1) to cross boundry structure (A4) in all 3-

respect.1) Job includes fixing of all fittings and Phase

accessories on erected DP structures.2) Single

tension hardware suitable for ACSR Dog Cond.- 6 set

shall be supplied by the contractor.3) Necessary

ACSR DOG conductor, 11kV Insulators will be

supplied by GETCO free of cost.SOR PART-D38

19 Providing of M15 Grade Concrete for various Cmt 10 5276.00

equipment structure, Guy, 11kv DP, M.K. Box, Neutral

channels, cable support channel, grouting of Pole/

Flood light structure with cement, sand & metal in

proportion of 1:2:4 respectively. 1) Work includes

muffing and with smooth cement mortar (1:6) finish.

2) Necessary sand, metal, water & cement shall be

supplied by the contractor. SOR PART D39

20 Excavation in Hard Rock for excavation of Earthing Cmt 15 525.00

Pits/trnchs, Yard Light Poles only. SOR PART D40

21 Loading, Transporting & Unloading of all material for Job 4 51720.00

66kV substation like Structure, indoor & out door SS

Equipments, DP Structure, earthing materials, battery

set, fire wedge, GI/MS scrap, all other required

materials, etc. in all respect for substation & opposite

end feeder bay from Store (Any store either const. div

or R&M store within respective Zone) to substation

This job also include crediting balance material as

respective construction divison store at no extra cost.

22 Supply & laying of 1 CoreX25mm2, armroured Copper Mtr 50 199.00

Cable, multi-strand flexible of approved make ISI

marked in ready made trench or PVC pipe from Battery

Charger to Battery Set including termination at both

side as per inst. of EIC. SOR PART D42

23 Providing and fixing of various type of sign Board, Job 1 24957.00

sticker, Big Sign Board, earthing pit board, earthing pit

Board & Single line diagram etc as per instruction of

IEC. Sticker of red, white, black Letters are to be

utilised for various sign board. SOR PART D43.

Earthing Pit Board Size:- 6" x 6" -30 Nos.

Safety Slogan Board, Hard Sheet board size 2' x 2'and

4mm thick (Gujarati Language)- 2 Nos.

Safety Slogan Board, Hard Sheet board size 3' x 2'and

4mm thick (Gujarati Language) with red and Yellow

colour.-03 Nos.

Single line diagram size 5' x 3' Digital with Alluminium

frame with fitting and as per approved diagram given

Big sign board size 5' x 4' and 2mm thickness

indicating sub station name digital with S.S. rod with

hole & as per approved symbol with fitting charge.-

Switch yard sign Board 12" X 6" with 2 mm Thickness

black & white Gujarati language.-25 Nos.

Safety Slogen Board size 2" x 6" in side control room.-

Various type of control room equipment sticker size-24

cms x 5cms.--18 Nos.

Safety picture board size :- 3' x 3' (Laminated for O/D

Name plate board of transformer size :- 2' x 1'- 04 Nos.

Cable marker size:- 6" x 6", Radium, fixed on 750mm

long M.S.Rod for fixing arrengement.- 30 Nos.

24 Providing and fixing of Radium sticker for out door and sq. 4000 2.00

Indoor equipments identification like LA, ISOlator, Inch

Circuit breaker, transformer, CT,PT,MK box, C&R

panels , 11KV panel board etc. SOR PART - D44

25 Providing and Fixing of fire stand from 75mm Gl pipe Job 1 4992.00

A class ISI mark heavy duty having 5ft width and 4ft

height as per inst of Engr. In charge work includes

cutting,drilling,welding of pipe as required. Fabrication

and supply of 16mm dia meter hook required size for

buckets. 4 Nos.of fire buckets are to be provided fire

stand should grouted with excavation of pit size

300mm x 300mm-2 Nos. of 600mm depth with 1:3:6

mix muffing 300mm in height including leveling of

stand. The fire stand is to be painted with post box red

colour of approval quality as per instruction of EIC. All

required approved material including

cement,sand,metal etc are to be provided by

contractor. SOR PART D45

26 Providing, Fabrication and erection of VHF set entena Job 1 1498.00

support pipe on control room by providing 25mm dia.

GI pipe of length 20 feet.including providing & fixing of

4 nos. of guy from GI wire 10 SWG. This job includes

painting of GI pipe by good quality paint white and red

alterlatively SOR PART D46

27 Labour charge for fixing of 11KV XLPE Indoor/Outdoor No 10 748.00

cable kit of any make for size 95 to 300mm2. Cable kit

provided by GETCO.

28 Providing & Fixing of RAYCEM/MSEAL/CABSEAL No 40 6139.00

make heat shrinkable type 11KV XLPE Indoor/

Outdoor cable Termination kit suitable for 11KV, 3C x

95 sqmm to 300 sq.mm XLPE power cable. SOR

29 Providing & Fixing of Aquaguard Total Reviva Water No 0 6889.00

R.O. Plant including Commissioning & Testing and

also with required peripherals for installation of plant

as per site condition

(1) Dimension: 320 X 275 X 410 mm

(2) Weight : 8 KG

(3) Water flow : 8 to 12 LPH

(4) Input power : 230V AC

(5) RO membrence : TFC spiral

You have to provide guarantee for the 12 month from

the installation. SOR PART D50

30 Providing and fixing of ISI mark Rubber Matting sheet sq.mtr 60 4492.00

Suitable for 11KV Class As per following specification.

Reference IS:15652-2006 with latest amendment.

Suitable for Voltage Class :B

Max Use Voltage : 11KV

AC proof voltage : 22KV

Dielectric strength : 45KV

Leakage current : < 10 micro ampere

Make : Vardhman or equivelent ( Rubberhouse India)

Thickness :2.5 mm.

Surface :Chequred on one side and other side plain.

Contractor has to supply Rubber Matting sheet as per

IS:15652-2006 with latest amendment specification

and shall submit test certificate for routine test as per

relevant IS SOR PART D51

31 Providing & fixing of reputed make ISI mark Fire No

Extingusher.with leatest ammendment in standards as

per following capacity.Note: Contractor shall submit

Test certificate for routine test as per relevant IS. SOR

a) Chemical powder 9kg Capacity No 2 6301.00

b) CO2 type - 6.5Kg No 2 7047.00

c) CO2 type - 22.5Kg No 2 17817.00

d) Mechanical foam type - 50Ltr Mtr 1 14499.00

32 Dismantling of any size of 11KV/22KV XLPE Mtr 2500 69.00

/PILCcable including excavation of trench 300mm wide

& 600mm deep including laying and filling up sand of

100mm layer from bottom & bricks on three side of

cable & refilling the trench with Murram/soil & ramming

etc. Required bricks,sand,power cable marker

/C.I./G.I. plate etc.will have to be supplied by the

contractor. Rates are inclusive of shifting of cable drum

to the site from S/S site store. Drum should be handled

only by jacking to avoid damage to cables. SOR PART-

33 Dismantling of any size of 11/22KV XLPE/PILC cable No 1000 31.50

from ready made cable trench or in open space. Rates

are inclusive of shifting of cable drum to the site from

S/S site store. Drum should be handled only by jacking

to avoid damage to cables. SOR PART-D14 (50%)

34 Dismantling of 66KV Control Panel, relay panel or C/R Per 8 345.50

panel or RTCC panel including grouting of panel, No.

jointing with adjoining panels with providing required

B/N including required fabrication for joining panels &

entry of control cables and complete vermin proofing.

SOR Part H1d (50%)

35 Dismantling of 11KV CB panel of any make including No 15 1038.00

grouting, jointing with adjoining panels & horizontal,

vertical levelling including required fabrication in

control panel or required stone cutting in flooring for

entry of power cable, control cable, including

interpanel wiring and complete vermin proofing. Job

includes supply of required bolts, nuts etc. and shifting

of panel from S/S site store to work site. SOR Part H2

36 Dismantling of LT panel board of any make as per No 1 484.00

manufacturers instruction manual including grouting,

vermin proofing etc.SOR Part H3 (50%)

37 Dismantling of Battery charger of any make as per Set 1 484.00

manufacturers instruction manual including grouting,

vermin proofing etc.SOR Part H3 (50%)

38 Dismantling of 100AH, 110Volt D.C. battery set on Per 1 3113.50

wooden/FRP stand as per instruction manual of No.

supplier, including first filling of battery electrolyte,

proper connection of cells and applying,

charging/discharging cycles as per manufacturer's

instruction manual and instruction of EIC.SOR Part

39 Dismantling of station transformer of 22KV or Per 1 1107.00

11KV/430V, 63/100KVA on its plinth, grouting of No.

foundation bolts, fixing of channels, danger board etc.

including connection with power cable/LV cable

terminations including shifting from S/S site store to

plinth as per instruction of EIC.SOR Part H6 (50%)

40 Steel chair, “S” Type , over hanging arm with cushion Nos 4 1850

with cane seat / back 1” X 16 gauge round pipe frame.

41 Steel rack of size 30’’x36”x15” with three partitions, Nos 3 2100

prepared with 20 gauges.

42 Steel Table of size 54”x30”x30” one side three Nos 1 8750

drawers, one side shelf 1x 18 gauge square pipe with

Nova pan pre laminated top.

43 Computer Table made from pre laminated Board size Nos 2 7200

with Key Board facility and Drawer with looking facility

with continues printer out facility and Mouse Tray and

also with special Tray for CPU and UPS having I.D.

X 21 inch X 2.5.FT.

44 Steel revolving Chair, revolving & tilting, low back high Nos 4 4600

type seat with foam rubber 3” in seat 2” in back with

good quality raxine cover, Five legs, Chromium plated

45 Steel cup board of size 78” x 36” x 19” four partition, Nos 2 9200

Door and shelves 20 Gauge, Body 22 Gauge, color

Olive green as per drawing attached.

TOTAL - 1 ( SCHEDULE B-1 )

SCHEDULE B - 2 : CONTROL WIRING

Sr. Rate Amount

Description of work/Supply Unit Qty.

1 Preparing of complete schedule of wiring for line/ Bay 7 1996.00

transformer bay for 66KV bays in triplicate. necessary

drawing will be provided by the GETCO. Schedule should be

approved by EE. or DE in charge.

2 Laying of Up to 7 Core Control Cable , 1.1KV PVC, Per 6050 6.00

armored copper/ aluminum control cable in readymade cable RMtr

trench and inside Hume pipe including binding / clamping of

cable with GI wire or saddles as per the requirement including

the supply and fixing of identification tags at both ends in

between if required to following size (Cable will be supplied

by GETCO at free of cost). SOR Part H7a

3 As above but for, Above 7 Core Control Cable . SOR Part Per 2890 10.00

4 Dismantling of Up to 7 Core Control Cable , 1.1KV PVC, Per 4000 3.00

armored copper/ aluminum control cable in readymade cable RMtr

trench and inside Hume pipe including binding / clamping of

cable with GI wire or saddles as per the requirement including

the supply and fixing of identification tags at both ends in

between if required to following size (Cable will be supplied

by GETCO at free of cost). SOR Part H7a (50%)

5 Dismantling as above but for, Above 7 Core Control Cable Per 2000 5.00

. SOR Part H7b (50%) RMtr

6 Laying of Up to 7 Core Control Cable , 1.1 KV PVC Per 800 21.00

armored copper /aluminum cable in ground by digging trench RMtr

of suitable width and 450 mm depth in any type of soil

including supply and fixing of identification tag on both end

and at distance every 100 mtrs . SOR Part H8a

7 As above but for, Above 7 Core Control Cable. SOR Part Per 500 26.00

8 Dismantling of Up to 7 Core Control Cable , 1.1 KV PVC Per 500 10.50

armored copper /aluminum cable in ground by digging trench RMtr

of suitable width and 450 mm depth in any type of soil

including supply and fixing of identification tag on both end

and at distance every 100 mtrs . SOR Part H8a (50%)

9 Dismantling as above but for, Above 7 Core Control Cable. Per 500 13.00

SOR Part H8b (50%) RMtr

10 Providing and fixing 'B' class G.I. pipes of following size for

cable protection including fixing with the structures.( Non

SOR) including required 'L' & 'T' band,coupling for CT,PT,

Transformer, M.K.Box cabling on structure including required

fabrication.(weight of pipe-25kg/meter)

11 {a} 40mm dia SOR Part H10a Mtr 200 255.00

12 {b} 50mm dia SOR Part H10b Mtr 120 284.00

13 Termination of Control Cable at Panel / M.K./ Equipments End 210 199.00

including supply of required size of brass double

compression cable glands, ring type lugs, printed ferrules,

PVC Binding Tape, Buttons etc. for Up to 7 Core Control

Cable. SOR Part H11-a

14 As above but for Above 7 Core Control Cable., SOR Part End 50 349.00

15 Providing & installation and commissioning of remote control Job 2 6489.00

switch board for ON/OFF control of all 11kv panel at operator

table with supply of good quality metal sheet box (18 SWG)

size 450 x 450 x 125 mm with door, 20 nos standard ISI make

and rating industrial push botton, indication lamp(LED) with

installing accept/ reset arrangement with required ISI marked

copper flexible wire size 2.5 Sq. mm including complete

wiring in PVC pipe and fixing on wall as per inst. of EIC.only

19/27 core x 2.5 sqmm cable supply by GETCO.

16 Providing and fixing of all weather proof, cold rolled sheet No 7 21549.00

steel junction box for CVT & PT, CT terminations with 30 Nos.

of disconnecting type, 'Elmex' make CATDM 4 or equivalent

type connectors and required nos. of fuses, links, internal

wiring having 6 sq.mm. multi strand Cu cable with ring type

lugs etc.as per instruction of Engineer-in-charge,as per

drawing enclosed SOR Part H13

TOTAL - 2 ( SCHEDULE B - 2 )

SCHEDULE B - 3 : YARD LIGHTING

Sr. Rate Amount

Description of work/Supply Unit Qty.

1 Providing & fixing of all weather proof, cold rolled sheet No 2 24732

steel AC Panel - 2 for Yard-Light AC supply having

(1) 63A 4P MCB : 01 NO

(2) MCX-12A contactor : 01 NO

(3) Digital Timer : 01 NO

(4) 20A TPN MCB : 06 NOS

(5) Indication lamp " 03 NOS

(6) Push Butten : 02 NOS

(7) Terminal Connector as per site requierment and other

detail as per drawing enclosed including grouting &

Necessary fabrication of GI Angle or fixing on GI Structure

and earthing with main grid as per instruction of EIC.a SOR

Part D53 (01 for Yardlight, & 01 for ACDB)

2 Supply & laying of following size Control/L.T power cable in Mtr 150 292

readymade cable trench or by excavating in any type of soil

cable trench size 1 ft. wide 2.5 ft. depth and refilling the

same as per the direction of EIC. Item Includes the cable

laying upto termination box with clamps & proper clamping

of cable on gantries by GI pipe & glands as per direction.

Item includes providing & supply of bircks, sand as per

requirement. The L.T power cable to be provided by

contractor as under :As per ISI 1554 (Part-I). 3.5 Core x

mm2 Alluminium cable -Armoured, from distribution X'mer

to Main Distribution Board near dist. X'mer and from MDB

to indoor LT panel board (LTPB) - both 2 runs. SOR Part

3 Supply & laying of following size Control/L.T power cable of Mtr 300 175

FINOLEX or equivalent ISI make in readymade cable

trench or by excavating in any type of soil cable trench size

300mm wide and 600mm depth and refilling the same as

per the direction of EIC. Item Includes the cable laying up

to termination box with clamps & proper clamping of cable

on gantries by GI pipe & glands as per direction. Item

includes providing & fixing of bricks, sand as per

requirement to protect cables . The L.T power cable to be

provided by contractor as under :As per ISI 1554 (Part-I).

Core x 25 mm2 Aluminum cable -Armored, from LT panel

board (LTPB) to Yard Light AC MK (AC Panel-2)., AC Panel

1 in C.R. and yard AC BoxSOR Part D56

4 - - do - - 4/7 C x 4mm2 Copper cable - Armoured, from Mtr 800 19

yard-light AC panel-2 to all yard-light fixture junction boxes

on LM & street light pole & Station transformer to Colony &

LT panel to watchman cabin. Note:- cable laying work either

in ready made cable trench or by excavating in any type of

soil if required (Only laying. Cable will be supplied by

GETCO)SOR Part D57

5 - - do - - 4C x 2.5mm2 Copper cable - Armoured, from yard- Mtr 300 19

light AC panel-2 to all junction boxes on post top lantern

Note:- cable laying work either in ready made cable trench

or by excavating in any type of soil if required (Only laying.

Cable will be supplied by GETCO)SOR Part D58

6 Providing & fixing of 'B' class ISI marked GI. Pipe of Mtr 40 180

32/40mm dia for cable looping & road crossing with

necessary elbo/band for each pole & J.Box for yard lighting

& for control-room flud lights wiring work with fixing on wall

with shadles if required as per inst. Of EIC.SOR Part D59

7 Providing & erection of 7.0 mtr. long swaged type welded No 12 9983

GI tubular street light pole on the foundation in any type of

soil as per inst. of EIC. Confirming to relevent IS and as per

attached drawing no. GETCO/E/STD/LTG.POLE-R2 DT-

24-12-2019. SOR Part D60

8 Providing & erection of 4.5 mtr. long swaged type welded No 20 6988

GI tubular street light pole on the foundation in any type of

soil as per inst. of EIC. Confirming to relevent IS and as per

attached drawing no. GETCO/E/STD/LTG.POLE-R2 DT-

24-12-2019. SOR Part D61

9 Supply and fixing of Pole/Wall/Structure mounted FRP No 35 748

junction box standard make of required size with clamp,

providing 1 SPN MCB G class of 16 A having short ckt

breaking capacity of 10KA peak of standard ISI make like

L&T/ANCHOR/MDS /HAVELLS & 2 Nos. of stud type

connector of standard make like Connectwell. The cable

glands & lugs are also included for both incoming & out

going cablesAmp. of standard make like MDS/HAVELLS &

2 Nos. of stud type connector of standard make like

Connectwell. The cable glands & lugs are also included for

both incoming & out going cables.SOR Part D62

10 Earthing to tubular pole/luminaries,by coil type earthing at No 15 400

10 SWG, GI wire in earth pit of 1.5 mtr. Depth in any type

of solil by using salt/ coke (charcole) 16 kgs each &

remaining filling with BC soil & clamping the earth wire with

pole & Junction box.SOR Part D63

11 Providing and fixing of Single Piece Cast Alluminium with No 20 7487

full frame with Acrylic Cover integrated luminaries

Energy Efficient flood light luminaries on swaged pole / GI

structure by providing required fabrications, of

Philips/CGL/Bajaj/GE/Osram make, suitable for 1 x

Watt HPSV/T with allied accessories such as Capacitor

igniter, ballast, control gear box etc, 4 core 2.5 sq mm

double insulated flexible stranded wire should be used from

control gear fitting to junction box.SOR Part D64

12 Providing & fixing of LED street light fixtures (1/120W) ( No 12 9593.00

CGL cat no. LSTO120/CDL 120W or equipment under cat-

II or above as per R&B SOR) 4-core 2.5 mm2 double

insulated flexible strended wire should be used from control

gear fitting to approved SMC type unction box as per

instructin of EIC. SOR Part-D-66

13 Providing & fixing of 1 x 40W LED Post Top Lantern No 5 7556.00

Fixtures (CGL Cat No. LPTO-40/CDL 40W or equivalent

under Cat-II or above as per R&B SOR) complete fitting in

all respect and 4 core X 2.5 mm2 double PVC flexible

copper cabel from control gear fitting to SMC junction box

as per instriction of EIC. ( 4 no are to be provided on main

gate & 3 No are to be provided on 4 Mtr Tubular pole)SOR

14 Providing & fixing of all weather proof MAIN AC Distribution No 1 20650.00

Box -SOR PART-D-54

TOTAL - 3 ( SCHEDULE B - 3 )

SCHEDULE B - 4 : CONTROL ROOM INDUSTRIAL ELECTRIFICATION

Sr. Rate Amount

Description of work/Supply Unit Qty

1 Providing and fixing of DBS as AC Panel - 1 for CR of ISI No 1 6738

marked Powder coated Pearl DBS of ivory color , wall

mounting, Double door Distribution board of L&T, Heggar or

higher make fitted with 63Amp Phase Bus bar, Earth / Neutral

Bars and inter connecting wires with removable bottom gland

plates for all power cable entry from bottom with DIN Channel

,incoming contact and INO - 63Amp TPN MCB 'C' Series

,6Nos-20A SP MCB C Series and 13N0 -IOA SP MCB C Series

All MCBs are L&T, Anchor or Higher make only. Complete in

all respect and as per instruction of EIC. SOR Part D68

2 Supply & laying of following size Control/L.T power cable of Mtr 40 175

FINOLEX or equivalent ISI make in readymade cable trench or

by excavating in any type of soil cable trench size 300mm wide

and 600mm depth and refilling the same as per the direction of

EIC. Item Includes the cable laying up to termination box with

clamps & proper clamping of cable on gantries by GI pipe &

glands as per direction. Item includes providing & fixing of

bricks, sand as per requirement to protect cables . The L.T

power cable to be provided by contractor as under :As per ISI

1554 (Part-I). 4 Core x 25 mm2 Aluminum cable -Armored, from

LT panel board (LTPB) to Yard Light AC MK (AC Panel-2)., AC

Panel 1 in C.R. and yard AC Box. SOR Part D56

3 Supplying & Laying Sub-main lines of 3X2.5 mm2 ( two Rmtr 500 125

for P & N and one for Earthing) copper PVC insulated wier of

ISI brand in suitable standard make steel conduit pipe having

minimum 1.5 mm thickness of approved brand with ISI brand

with clmpes with it's associated accessories for various circuits

amanating from AC panel 1.as per inst. of E.I.C. SOR Part D69

4 Point wiring for control room tube lights, fans, exhaust fans, Point 95 1298

fency lights, water tight bulck head lights with PVC insulated

660 V grade standard copper wire in ISI make Gl conduct pipe

20 mm dia and 1.6 mm wall thickness size fitted with sadles on

the wall/ceilingt Size of wire shall be with 3C x 1 .5 sq.mm PVC

insulated copper wire for phase and neutral and earth wire [

Green] and 5 Amp Anchor/Roma or any equivalent switch as

per specification with 16 guage M.S. box. The box shall be

covered with 3 mm thick decorative mat finish hylum sheet. The

work is all inclusive of supply and fixing of required materials

as afore said [ like Gl conduct pipe , sadles , swithces , Steel

box , ceiling Rose , flexible copper wire etc] to complete point

wiring with each fixture to be earthed by SWG-12 stranded

copper conductor having green color as per direction and

instructions of E.I.C.. SOR Part D70

5 Providing, fixing & termination for emaregency D.C. supply Job 1 4492

arrangment. This job includs supply & laying of 2C x 2.5 mm2

Copper arrmoured cable from battery chargers to SBDC, fixing

& providing SBDC & complete wiring with supply of wire & D.C.

lamp (110V D.C., 100 watt-4 Nos.) in standard steel conduit

pipe as per inst. of E.I.C. SOR Part D71

6 Providing and Fixing points wiring in Gl. Conduct pipe size 20 Point 10 1213

mm dia and 1.6 mm wall thickness with singal PVC insulated

2.5 Sqmm. copper wire of ISI standard good quality using

1.5mm thick suitable size ISI mark ( 2+3 pin in socket ) Anchor

brand 15 Amp. 250 Volt plug socket as seperate

plug point with shock proof accessories incl. indication lamp ;

erected on separate decorative mat finish hylum sheet board

on wall with providing adequate green earthing wire as per

specification and instruction of Engineer Incharge.

7 ---- Do ---- as above but with singal PVC insulated 3Cx1.5 sq. Point 10 814

mm.copper wire of ISI mark plug socket for 5A domestic use

separate plug point as per direction and instruction of E.I.C.

8 ---- Do ---- as above but looped on same board i.e. no separate Point 20 199

board, plug socket for 5A domestic use as per direction and

instruction of E.I.C. SOR Part D74

9 Providing & Fixing of Ceiling Fan of 1400mm sweep No 19 1797

Bajaj/Crompton / Orient/ usha / Cinni make (ISI approved)

flexible wiring by using twin core double PVC 48/0.2 mm copper

flexible cord of suitable & approved make and size from ceiling

rose upto fan terminal & supply and fixing of energy saver

regulators , extra GI pipe of required size and length for

lowering of fan if required as per instruction of EIC. SOR Part

10 Providing & fixing of 50 W LED Lighting Fixture (CGL Cat No. No 24 5059

LCTLR-50-FO-CDL 50W or equivalent under Cat-II or above

as per R&B SOR) 4 coe 2.5 mm2 double insulated flexible

strended wire should be used from control gear fitting to

approved SMC type junction box as per inst. of EIC.SOR PART

11 Providing and fixing of 41.5W LED Lighting Fixture (CGL Cat No 20 3154

No. LPFC-36-CDL 41.5W or equivalent under Cat-II or above

as per R&B SOR) Ref-CE(p)/SE(SS)/V/7213 dt.30.05.17 SOR

12 Providing and fixing of 40W (1x4) LED Lighting Fixtures as per No 2 3417

drawing ( in porch area) (CGL Cat No. LCTLSN-40-CDL (1x4)

40W or equivalent under Cat-II or above as per R&B SOR) as

per instruction of EIC PART D-77

13 Providing & fixing of 30W LED Street Light Bulkhead (CGL Cat No 6 2678

No. LSTO-30-CDL 30W or equivalent under Cat-II or above as

per R&B SOR) on out side C/R building and inside cable trench

in C/R including wiring from ceiling rose to fixture with suitable

size of PVC insulated ISI marked copper wire only as per

instructin of EIC.SOR PART D-78

14 Providing and fixing of heavy duty exhaust fan in battery room No 1 3494

size 18" of Make GEC/KHAITAN/ CROMPTON/ HAVELLS incl.

M.S. lourex shutter of Fan & necessary wall finishing works and

applying bird proof net on outside wall with required

arrangement for rain water sealing and necessary conection

from ceiling rose as per Direction and instruction of EIC. SOR

15 Same as item No.1 but with Fixing of Electric bell with bell No 1 149

switch near officer's table. All materials must be ISI mark and

approved by Engineer I/C SOR Part D80

16 Providing and fixing of 18W LED Lighting Fixture (CGL Cat No. No 6 1281

LCTL-18-CDL 18W or equivalent under Cat-II or above as per

R&B SOR) as per instructin of EIC. SOR Part D81

TOTAL - 4 ( SCHEDULE B - 4 )

SCHEDULE B - 5 : COLONY INDUSTRIAL ELECTRIFICATION

Description Qty Rate UNIT Amount

PART -B Electrical BOQ Type

Providing and fixing of DBS as AC panel-

1 for CR of ISI marked powder coated

pearl DBS or ivory color, wall mounting,

Double door Distribution board of L&T

Heggar or higher make fitted with 63 Amp.

Phase bus bar , earth, neutral bars & inter

connecting wires with removable botton

1 gland plates for all power cable entry from 1.00 1.00 6738.00 No

bottom with DIN Channel, incomming

contact and 1 No- 63 Amp TPN MCB "C"

series. 6 No - 20A SP MCB "C" Series and

13 no-10 Amp, SP C Series. All MCBs are

L&T , Anchor or Higher make only.

Complete in all respect and as per

instruction of EIC. Sor 25-26 Part D-68

Providing and fixing of open type full point

wiring inside OVEL shape PVC Pipes with

2.5 sq.mm Multistranded Copper Flexible

double PVC Insulated wire of standard

brands like POLYCAB/AVOCAB etc for

Phase & Neutral and 1.5 sq.mm Green

2 Colour for earthing. All accessories like

Switch Board, switches, Pendent

Holders.Bracket Holders, Cellig Rose etc.

shall be of standard brands like

SSK/ANCHOR etc make.Sor 25-26 Part

As per Item No.124 but for 5 pin 5 Amp.

3 Point wiring, Sor 25-26 Part D-83

As per Item No. 124 but for 5 pin 15 Amp.

4 Point wiring, Sor 25-26 Part D-84

As per Item No.124 for Call Bell including

5 fixing of Reputed Brand Call Bell. Sor 25- 4.00 4.00 300.00 Point

Circuit charges for individual circuit with

2.5 sq.mm copper wire in GI Conduit Pipe

as per Drg. And Instructions of Engineer

(1) Two No of power point looped in one

(2) 8 No of light/fan/holder/ looped in on

(3) 5 Amp plug point is to be considered

as 2 No of light point. Sor 25-26 Part D-86

Providing and fixing of reputed brand (

CGL/ORIENT/USHA) White Coloured

Celing Fan with 1200 mm Sweep with all

7 required accessories Fan is to be 8.00 8.00 1597.00 No

purchased from authorised dealer only

inspection is to be arranged prior

purchasing.Sor 25-26 Part D-87

Providing and fixing of 18W LED Lighting

Fixture (CGL Cat No. LCTL-18-CDL 18W

8 or equivalent under Cat-II or above as per 16.00 16.00 1281.00 No

R&B SOR) as per EIC, Sor 25-26 Part D-

Providing and Fixing of Distribution Board

12 Way, SPN fitted with 1 No. of 25 Amp.

MCB, 1 No. D.P. ELCB 32 Amp and

9 required No of MCB's. The DP, MCB, 4.00 4.00 2995.00 No

ELCB should be of standard company like

L&T, Siemen, MDS etc. Sor 25-26 Part D-

Installation of C.I. Plate Type Earth Pit for

earthing of various Installations of

quarters. CI Plate weighing 10 Kg is to be

burried inside earth Pit Size 0.5M x 1.5M

to be filled with Black Cotton Soil, Sand,

Salt, Charcoal etc( 16 Kg each). 10 SWG

10 Flexible Multistranded Coppe Wire to be

laid inside good quality heavy duty 19 mm

PVC Pipe from earth Pit to main

distribution board as per Inst. of EIC. Job

includes supply of all required material by

the contractor.Sor 25-26 Part D-89

Providing & fixing of surface mounted 12-

way distribution box of

L&T/STANDARD/MDS/INDOASIA make

for electric power supply to staff quatrs. It

includs providing and fixing of one 32A

TPN, three 16A DP switch of

11 L&T/STANDARD/MDS/INDOASIA with

fixing and commissioning of energy meter

provided by DISCOM, if required with

complete wiring with 2.5mm2 copper,

insulated wire of POLYCAB/AVOCAB

make.Sor 25-26 Part D-90

Providing & fixing of Wall Mounted Fan

Crompton / Orient/ PSPO / Usha / Cinni

(must be ISI approved).including wiring

from ceiling rose to Fan terminals of by

12 using twin core flexible PVC to PVC 48 /

0.2 mm copper cord of suitable &

approved size & fixing of Fan regulator.Sor

25-26 Part D-91

Providing and laying of 2 core, 2.5 sq. mm

PVC armoured copper cable of standard

ISI make , inside hume pipe / cable trench

/ in ground, from control room / transformer

distribution board to junction box of quarter

& main switch of watchman cabin.Cable is

to be laid in ground by preparing 300mm

13 wide and 450mm deep trench. Cable is to

be laid on sand bed and covered by RCC

Hume Pipe Halves for protection of cables.

Job also includes fixing of appropriate size

saddles on the wall for dressing cables as

per instructions of E.I.C. Sor 25-26 Part D-

Providing and fixing Auto door shutter lift

of ISI Make (Otis, Omega,Schneider) or its

equivalent with lift use license, 2 years

waranty including transportaion and

following specifications [1] GEAR LESS

LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C.

Permanent Magnet Synchronous motor of

proper rating with high efficiency shall be

used. [2] Micro processor based / PLC,

ACVVVF, vector control drive with encoder

feedback closed loop system shall be used

for lift car and door operation which shall

be full collective selective operation hall

call demand response, UP/DOWN hall

stops, Main, Up/ Down Contactor with

overload and phase reversal relay and

safety controls.[3] Car with M S platform

with bracings of adequate size and to

sustain the impact load cabin + passenger

with safety factor of fire for steel and side

panels of Stainless steel of sheet of grade

304 duty. Car ceiling will be S.S. finishes

with aesthetic appearance with LED ceiling

lights. Car flooring shall be of anti skid PVC

14 with choice of colour of engineer in charge.

Car doors shall be of stainless steel grade

304, hairline finish with centre opening /

telescopic automatic doors. Car panel will

also be S.S. 304 finished with emergency

stop device, mechanical door safety

device, facility of auto/ attended mode. All

car panel buttons and all floor switches

must be with brail language as per lift

act.[4] All landing doors must be fire rated

for 2 hour shall be fully automatic centre

opening/ telescopic opening made of

hairline finish steel grade of 304 with key

holes and infrared curtains with Unlocking

facility from outside [5] Appropriate battery

operated emergency light in the car along

with alarm switch shall be provided. Also,

Emergency Light & Fan should start

immediately without any Time Delay as

soon as power fails.[6] Digital scrolling

indicator system for up-down arrow along

with floor position indicator shall be

provided inside the car and at all floors.[7]

Full height infra red curtain with multiple

cross / crossing light beams shall be

provided.[8] Automatic Rescue Device

(ARD) shall be provided accordingly of

passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility). [9]

Audio visual indication in the lift car

showing over loading shall be provided

such that doors kept open till excess load

is removed.[10] Spring buffers/PU Buffers

shall be provided.[11] Car fan as per

passenger capacity with automatic sleep

timer shall be provided.[12] Voice

annunciator with suitable music shall be

provided in lift car. [13] Self diagnostics

system for operational and safety

parameters shall be provided in control

panel.[14] Mechanical over speed

governor with governor calibration as per

actual site parameters and submission of

calibration certificate submission, door key

holes in the floor doors, fireman switch

shall be provided.[15] Lift machine hoisting

arrangement in the lift machine room and

monkey ladder for lift pit should be

provided by the lift agency, along with the

other steel structure works, foundations for

the machine etc…[16] In the hoist way

fascia plate shall be provided without any

extra cost, where ever required as / if

directed by engineer in charge.[17]

Permanent wiring with necessary safety

devices like RCCB in all circuit, Over

Voltage Under Voltage protection and THD

eliminator in circuit for lift machine room

and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug

points shall be provided by the agency.

Only 3 phase Power Supply shall be made

available by department in lift machine

room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift

Agency.[18] Any civil/ electrical works for

additional and alteration in lift shaft and

machine room related to erection of lift

shall be made by lift agency without any

extra cost. (granite/marble fixing around all

landing door openings are not in lift

agency’s scope.)[19] Agency has to

provide all working drawings and

documents and liaison services for

obtaining all necessary permission from lift

inspector and other authorities. [20]

acrylic transparent licence/display A4 size

holder in lift car[20A] As per statutory

requirement of Govt. Of Gujarat lift &

escalator act 2000, lift agency has to

provide 1. Car top safety barricade2. Push

& talk communication system.3. Fireman's

switch operation at Ground Floor.

4.carrying out third party lift inspection

during/after lift erection and provide report

by third party authorized by concern

licensing authority 5.agency has to

provide third party insurance upto

completion of free maintenance period and

submit the document for the same. [21]

Car Panel Operating Buttons with floor

position indicator/buttons must be of Auto

Glow type clearly visible when view from

inside cabin.[22] For Physically

Handicapped person Full Length

Handrails of hairline finish steel grade of

304 should be provided at appropriate

height on the Rear & Side Wall Panels in

Lift Car.R&B Electric SOR 2021-22

Chapter 13 Item no 13-1-C-B

Providing & fixing of 'B' class ISI marked

GI. Pipe of 32/40mm dia for cable looping

& road crossing with necessary elbo/band

15 for each pole & J.Box for yard lighting & for 20.00 20.00 180.00 Mtr

control-room flud lights wiring work with

fixing on wall with shadles if required as

per inst. Of EIC. Sor 25-26 Part D-59

Electrical BOQ in Rs.

Part Item Erection in Rs.

B Control Wiring

D Control Room Elect

E Colony Electrification

Grand Total in Rs.

Grand Total in Rs.

SIGNATURE OF CONTRACTOR SUPERINTENDING ENGINEER (TR)

(With rubber stamp/seal of the company) GETCO, CO, Navsari.

All erection work is to be carried out strictly as per the manual of OEM (Original equipment manufacturer), FQP and

instruction of E.I.C.

All equipment erection charges are inclusive of shifting dragging handling of the respective equipment up to S/S

erection site from its S/S site store but exclusive of GST / service tax.

Contractor has to ensure safe shifting dragging erection of all equipments to comply with labour laws I.E. rules etc.

All erection charges are inclusive of fixing of clamp connectors, all necessary accessories to the respective

Transformer erection charges cover shifting, dragging, handling etc. for its bushings, radiators, conservator tank and

allied accessories and oil filling with filtration.

STORAGE CUM ERECTION INSURANCE :- Bidder shall note that storage cum erection insurance is to be taken at

his own cost and amount of material for erection to complete the scope of sub-station work is to be considered Rs

Bidder shall have to take the comprehensive Marine cum Erection (MCE) insurance policy against any loss,

damage, theft, pilferage, fire etc. for the complete period of storage, erection and commissioning up to the time of

taking over the line or S/S by GETCO.

All the required tools and tackles like compression jointing machine for conductor, earth wire, cutting machine,

welding set, drill machine, etc are to be arranged by the contractor at his cost.

Contractor should complete transportation within one job as per above schedule. No extra payment will be given in

any case other than this job.

For power transformer oil filteration the filter machine shall be arranged by Contractor at his own cost.

Earthing pit activities should be done in such a way in presence of GETCO supervisor that final earthing pit

resistance should be record as per standard. All expenditure like sufficient watering to maintain earth resistance up

to the mark should be born by contractor.

All the brought out items get to be approved from DE/EE invariably.

The execution of bore are to be carried out as per soil strata in consultation with E.E. .

The Classification of hard rock strata should be got approved from E.E. invariably.

Contractor has to make arrangement for site engineer and skill labors for maintaining all activities and records as

Sign & Seal of Contractor Page 65/66

Regd. Corporate Office: GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED, Sardar Patel VidyutBhavan, Race Course, Vadodara-390007

Corporate Identity No. (CIN): U40100GJ1999SGC036018 Phone: (0265) 2310582-86, Fax: (0265) 2337918, 2338164, Web site: www.getcogujarat.com

per FQP. also assisting to staff/Engineer in charge to take IR values, Earth pits values, name plate detail, oil

samples etc all activities relative to commissioning of project.

Contractor has to make arrangement for skill labors for assisting to commissioning engineer, PLCC staff/engineer,

SMS/testing staff/Engineer as an when require as per instruction of Engineer in charge.

After completion of project successful bidder has to submit all the records like battery charging report, control wiring

schedule, earth pit lay out, earthing grid layout, power cable lay out, yard light pole and Ckt lay out etc in hard and

soft copy for handing over the project.

For Colony & Yard lighting and Control Room Industrial Electrical wiring works the rates quoted shall be inclusive of

providing and fixing / Installation ,testing and commissioning of complete Control Room lightings, Ceiling Fans,

Exhaust Fans etc..

All items / materials shall be installed / erected in accordance with specified manuals /technical guide lines of the

manufacturer and as per instruction of EIC.

Cable laying, Circuit distribution and Fixture fixing shall be carried out as per GETCO Standard Drg. No.

GETCO/E/06S-STD/S-013 (R0) Sheet 1 to 3 of 3 and as per Instruction of Engineer In charge.

Control Room Wiring, Fixing of fixture, Ceiling fan & Exhaust fan etc shall be carried out as per Standard Drawing

No. GETCO/E/6S-STD/S-015 (R0) Sheet No 1 & 2 of 2. and GETCO/E/6SSTD/S-013 (R0) Sheet No 1 of 3 and as

per instruction of Engineer In charge.

For entire control Room, Office & store etc. building wiring is to be done by Providing and fixing of ISI Marked MS

conduit pipes 20mm dia. & 1.6 mm wall thickness size (Minimum Size) and PVC insulated stranded copper wire of

FENOLEX/ANCHOR make as per relevant IS.

Total tilting angle for the flood light luminaries provided on pole is considered as maximum of 45 degree, looking to

the tilting angle 20 degree available with luminaries it self & supporting pipe should be fabricated & welded

accordingly. Also arm for fixing of Flood light luminaries shall be fix as per required angle & direction as per

instruction of EIC.

EE/DE will decide the make of luminaries, fan, cable, MCB, Switches etc. and same is to be inspected at authorize

Yard lighting G.I.Tubular pole should be inspected at the cost of contractor.

Successful bidder has to appoint site engineer to maintain site register and FQP as per ISO

All work should be done according to ISO & FQP and all requier documents including filled FQP, testing results, etc

should be submitted while handing over the s/s.

The above rates are with supply of cement by the contractor.

Sign & Seal of Contractor Page 66/66

Regd. Corporate Office: GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED, Sardar Patel VidyutBhavan, Race Course, Vadodara-390007

Corporate Identity No. (CIN): U40100GJ1999SGC036018 Phone: (0265) 2310582-86, Fax: (0265) 2337918, 2338164, Web site: www.getcogujarat.com