Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.0 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹5.1 L+₹6,530.99 (1.31%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | 3₹5.1 L+₹15,320.77 (3.07%)Rejected-AOC | 3 | Rejected-AOC L3 | |
| 4 | 4₹5.7 L+₹67,125.28 (13.5%)Rejected-AOC | 4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | K RAMACHANDRAN L2 | KCN CONSTRUCTION LLP L4 | P.RAVEENDRAN L3 | PRAMOD BOSE K V L1 |
|---|---|---|---|---|---|---|---|
| 1.00SHEET WORK | |||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 17.64 | cum | 298.64 ₹5,268.01 | 334.48 ₹5,900.23 | 303.84 ₹5,359.74 | 294.8 ₹5,200.27 Lowest |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 1.18 | cum | 6,585.88 ₹7,744.99 | 7,376.19 ₹8,674.4 | 6,700.65 ₹7,879.96 | 6,500.74 ₹7,644.87 Lowest |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 29.4 | sqm | 320.58 ₹9,425.05 | 359.05 ₹10,556.07 | 326.17 ₹9,589.4 | 316.47 ₹9,304.22 Lowest |
| 1.00 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | 6.33 | cum | 8,707.78 ₹55,120.25 | 9,752.71 ₹61,734.65 | 8,859.52 ₹56,080.76 | 8,595.22 ₹54,407.74 Lowest |
| 1.00 | 5.22.2:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHard drawn steel wire | 662.31 | kilogram | 91.1 ₹60,336.44 | 102.03 ₹67,575.49 | 92.69 ₹61,389.51 | 89.92 ₹59,554.92 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,998.3 | kg | 155.29 ₹3,10,316.01 | 173.92 ₹3,47,544.34 | 157.99 ₹3,15,711.42 | 153.28 ₹3,06,299.42 Lowest |
| 1.01 | OD325721/2025-2026:Providing and fixing Alu Zink profile sheetsiron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer in charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm ) with EPDM seal, complete up to any pitch in horizantal/ vertical or curved surface, excluding the cost of purlin, rafters and trusses and including cutting to site and shape wherever
required 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 93 | sqm | 478.99 ₹44,546.07 | 536.47 ₹49,891.71 | 487.33 ₹45,321.69 | 472.8 ₹43,970.4 Lowest |
| 1.01 | OD325724/2025-2026:Providing and fixing Alu zinc roof sheet 0.40 mm (+ 0.05%) using self drilling/self tapping
screws complete:Ridges plain (500-600 mm) (Modified data 12.51.1 DAR) | 7.5 | metre | 394.23 ₹2,956.73 | 441.54 ₹3,311.55 | 401.1 ₹3,008.25 | 389.12 ₹2,918.4 Lowest |
| 1.01 | OD325723/2025-2026:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr
C/C | 15 | per metre | 273.81 ₹4,107.15 | 306.67 ₹4,600.05 | 278.59 ₹4,178.85 | 270.42 ₹4,056.3 Lowest |
Tender Value
₹5.7 L
EMD Value
₹14,195
Closing Date
5 Feb 2026, 5:00 pmClosed
Assistant Engineer
Office of Assistant Engineer
KPGP 127/25-26-Providing infrastructure facility to Vayojana kendrangal
2026_LSGD_830136_4
AELIDEWKDNPLY626
Open Tender
Civil Works - Buildings
Item Rate
240 days
Kadannappally
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,255
Yes
₹14,195
Yes
21 Apr 2026
28 Jan 2026
7 Feb 2026
28 Jan 2026
5 Feb 2026
28 Jan 2026
SHEET WORK
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.22.2:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHard drawn steel wire
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD325721/2025-2026:Providing and fixing Alu Zink profile sheetsiron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer in charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm ) with EPDM seal, complete up to any pitch in horizantal/ vertical or curved surface, excluding the cost of purlin, rafters and trusses and including cutting to site and shape wherever required 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD325724/2025-2026:Providing and fixing Alu zinc roof sheet 0.40 mm (+ 0.05%) using self drilling/self tapping screws complete:Ridges plain (500-600 mm) (Modified data 12.51.1 DAR)
OD325723/2025-2026:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1396296.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.15 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.26 MB
127sbd.pdf
Tender Documents • 1.93 MB
127tendfom.pdf
Tender Documents • 0.26 MB
127prili.pdf
Other Document • 0.26 MB
127afida.pdf
Other Document • 0.24 MB
BOQ_1396296.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .