20396 Annual Plan-DPT TSR 2024 - 25 GVHS PAZHANJI - SCHOOL STAGE MAINTENANCE, KATTAKAMBAL GP, CHOWANNUR BP (Pro.No. S0179/25)-IN CHOWANNUR BP-General Civil Work

Amount

GVHS PAZHANJI - SCHOOL STAGE MAINTENANCE, KATTAKAMBAL GP, CHOWANNUR BP

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

14.61:Painting (one or more coats) with black japan paint of approved brand and manufacturing to given an even shade.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD73448/2024-2025:Providing and fixing on Eave face UPVC half cut rainwater gutter pipes (150mm 4kg/cm2) with all necessary fittings with clamps at 1M interval (12.41.2 modified)

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

5.16:Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 ( 1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

OD73451/2024-2025:Providing and laying 60mm thick factory-made cement concrete interlocking paver block M-30 grade made by block making machine with strong vibratory compaction, of approved size, design, & shape laid in required color and pattern over and including 50mm thick compacted bed of 6mm aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineers in charge. Modified data of 16.68

OD75358/2024-2025:Supplying and fixing at site Aluminum composite Panels (ACP) of approved make and color certified for exterior applications,4mm thickness with 28 to 30mm microns PVDF voting confirming to ASTM standard with top aluminum skin of 0.25mm and with a bottom aluminum skin of 0.25mm with service coating of polyester paint, laminated to a centre core of 2.5mm single recycled low density polyethylene material. The panels shall be cut to sizes of required grid dimensions (minimum grid size 450*450mm) with the site condition. The panel shall be fixed on prefabricated framework using 38mm*25mm*1mm thick Aluminum extruded sections of approved make joined with std cleats & fasteners. The gaps formed b/n the panells shall be seal;ed with silicone sealant, Hinges for opening shall provide separately if needed. The rate inclusive of cost and conveyance of all materials labour for erection, hire charges of scaffolding etc. complete.

MOIDEENKUTTY CK- Contractor

VIPIN P L

Bidder Name

kunhahammed v

MOIDEENKUTTY CK- Contractor

VIPIN P L