Job / Repairs to be carried out for Departmental M-Van JK05F-9552 of Mechanical and Hospital Sub-Division 1st Baramulla

Preventive maintenance by way of carrying out following jobs: Providing & Filling of M. Oil 15W-40 - 07 Lts Providing & Fitting of M. Oil Filter Set - 01 Set Providing & Fitting of Diesel Filter Set - 01 Set Providing & Fitting of Air Filter Assy. - 01 Set

Overhauling of F I pump : The job comprises of overhauling of Fuel injection Pump assembly which includes dismantling of control rack, removal of delivery valves along with plunger, delivery valve springs and plunger return spring, bearing, distance piece, drive shaft and elements. The job includes proper cleaning of pump assembly with HSD. The job includes replacement of nozzles along with nozzle compression spring and cleaning of all the components of fuel injectors. The job further includes calibration of fuel injection pump for checking the delivery of fuel and phasing of fuel injection pump for assessing the fuel injection timing. The job also includes the testing of fuel injection pump on pressure testing machine upto desired working pressure and RPM (1200). And then checking of pump for the satisfactory performance on the machine and testing it under various load conditions properly. The job also includes providing/fitting of below mentioned items as per sample: (a) Elements - 04 Nos (b) Delivery Valves - 04 Nos (c) Drive Shaft - 01 No (d) Bearing - 01 No (e) Distance Piece - 04 Nos (f) Nozzles - 06 Nos

Four-wheel checking of vehicle by way of p/f of following items: - a) Oil seal front & rear = 4 Nos b) wheel bearing grease = 2 Kg c) brake booster kit = 2 Kit d) brake lining set =4 Set e) tie rod end set = 2 Set f) drag link end set = 2 Set g) centre bearing = 2 No h) wheel bearing inner =2 No i) wheel bearing outer = 2 No j) U.J Cross = 1 No k) Brake master Cylinder with reservoir bottle= 1 Assy

Radiator repairing and de-scaling: - The job shall include shifting of radiator from site to the workshop for necessary repairs and servicing. The radiator shall be subjected to leakage test by way of compressed air method. The leakage spots shall be rectified and repaired by way of brazing. The same shall again be tested for possible leakages from radiator tubes. The job further includes complete descaling of tubes and finally washed & cleaned. . The job also includes providing of new Radiator Hoses set complete, Hose pipe clamps (01 set.) .

Electrical repairs by way of Providing / Fitting of back light assy (02 No) Fog light assy (02 No.), side indicator assy (04 No), Battery lead with thimbles +Ve & -Ve (6 ft).

Repairs to transmission System of the Vehicle by way of dismantling the transmission from the engine and removing the old damaged items and then p/f of following new items given below:- (all parts must be supplied by authorized dealer of Tata Motors) a) P/f of Clutch Plate as per sample = 1 No b) P/f of Pressure Plate Comp. Asly as per sample = 1 No c) P/f of Clutch Release Bearing as per sample =1 No

Proving and fitting of new tyres with tubes (7.00 R16) (02 Nos)