Regarding the work of periodic repairs in Bopal Lake and other lakes located in Thaltej Ward of the North west Zone. (A.R.C.)

Name of Work:- Regarding the work of periodic repairs in Bopal Lake and other lakes

located in Thaltej Ward of the North west Zone. (A.R.C.)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation up to1.5 m depth including

sorting out and stacking of useful materials and

1 disposing of theexcavated stuff upto 50 Meter lead.(A)

Loose or soft soil (R & B S.O.R 2023-24 I.no. Item Code

8 Upto 1.5 mt Depth 115.92 Cmt

8 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

2 20 exceeding 20 cm. in depth consolidation each 129.10 Cmt

deposited layer by ramming and watering.

Providing and laying cement concrete1:5:10 (1-

Cement: 5- coarses sand and:10-hand broken stone

3 3 aggregates 40mm nominal size) and curing 2492.51 Cmt

complete excluding cost of formworkin (A) Foundation

Providing and laying cement concrete1:4:8 (1-

Cement: 4- coarses and:8 hand broken

4 5 stoneaggregates 40mm nominal size) and curing complete 2653.67 Cmt

excluding cost of formworkin (A) Foundation and Plinth

Providing and laying cement concrete1:3:6 (1-

Cement: 3- coarses sand and:6-hand broken stone

5 2 aggregates 40mm nominal size) and curing 2976.00 Cmt

complete excluding cost of formworkin (A) Foundation

Providing and laying cement concrete 1:3:6 (1-

Cement:3-coarse sand:6-crushed stone aggregates

6 3 20mm nominal size) and curing complete including cost 4006.15 Cmt

of formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm

7 nominal size) curing complete excluding cost

of formwork and reinforcement.

Foundations, footings, base or columns and mass

a 2 concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams,

b 1 girders and cantilivers upto floor two level 4012.47 Cmt

Independent piers, columns, and pillars, upto floor two level

Provdg. & laying cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregates 20 mm nominal

size) for reinforced concrete chhajjas not exceeding

10 cm. thickness upto floors two level including

8 1 finishing the exposed surfaces with cement mortar 6487.07 Cu.M.

1:3 (1 cement : 3 find sand) to give a smooth and even

surface centering and form work and curing

complete excluding cost of reinforcement.

Providing and laying controlled cement concrete /

Ready Mix Concrete of M-200 and curing complete,

9 excluding the cost of form work and reinforcement for

reinforced concrete work in:

Foundations, footings, base of columns, and mass

(A) 2 concrete. 3977.88 Cu.M.

(B) 2 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders

(C) 1 and Cantilever upto floor 4460.36 Cu.M.

(D) 1 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

(E) 1 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 1 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

20 mm nominal size) and finishing smooth with curing

10 1 etc. complete including the cost of form work but excluding 6241.78 Cum

the cost of reinforsement for R.C.C work in (iv) Slabs

having more than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

20 mm nominal size) and finishing smooth with curing

11a 1 etc. complete including the cost of form work but excluding 7401.59 Cum

the cost of reinforsement for R.C.C work in (iv) Slabs

having more than 8 cm and upto 10 cm.thickness

Brick work using common burnt clay building

bricks having crushing strength not less than

12 35kg./Sq.Cm.in foundation and plinth in Cement

Mortar1:6 (1-Cement :6 - fine sand)

5 (A) Conventional (upto 10 ton) 3981.21 Cmt

5 B) Modular 4241.70 Cmt

Extra Rate for brickwork in Above Item for super

13 structure above plinth level upto floor two level (B)

a 5 (A) Conventional 272.25 Cmt

b 5 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular Per

D) above floor two level Item No. 2(6.13) (B) Conventional Per

Providing and laying in position Ready Mixed M250 grade

concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site of

13a 2 laying, excluding the cost of centering shuttering finishing 4853.56 Cmt

and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 450 kg

Half brick masonry in common brunt clay building

bricks having crushing strength not less than 35 Kg/Sq.Cm.

14 10 in Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in 583.49 Smt

foundation and Plinth conventional brickwork

Extra for half brick masonry in super structure above

15 20 plinth level upto floor two level (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as

to give a rough finish including centering, shuttering,

strutting and propping etc. height of propping and

16 centering below supporting floor to celling not exceeding

4 M & removal of the same for in situ reinforced or

plain concrete work upto floor four level

Foundation, footings, bases of columns etc. and mass

a 10 concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs

b 5 Landings and the like. (1) Floors etc. upto 200 mm in 252.00 Smt

(B) Flat surfaces such as soffits of suspended floor roof

c 5 slabs Landings and the like. (2) Floors etc. above 200mm in 270.90 Smt

Vertical surface such as walls (any thickness) partitions and

d 10 the like including attached buttresses & string course & the 229.95 Smt

(ii) Sides And Soffits Of Beam, Haunchings

e 5 Cantilevers, Girders, Bressumers And Lintels Not 192.15 Smt

Exceeding 1 M In Depth.

(G) Columns PillarsPosts and struts. (1) Square

f 5 Rectangular Polygonal in plan. 297.68 Smt

g 5 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-

h 5 levers Girders Bressumers and Lintels exceeding 1M.in 259.88 Smt

Providing and fixing 35 mm thick panelled, glazed or

panelled and glazed shutters for Doors windows and clear

17 story windows including anodised alluminium But

hinges with necessary screws and indian teak wood

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup

boards etc. including black enamelled M.S. butt hinges

18 2 with necessary screws.(A) Indian teak wood. (i) Fully 3006.75 Smt

Providing and fixing 25 mm thick shutters for cupboards etc.

a 2 including anodised alluminiu butt hinges with necessary 3006.75 Smt

screws. (A) Indian teak wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc.

including anodised alluminiu butt hinges with necessary

b 3 screws. (A) Indian teak wood. (ii) Partly panelled and partl 2814.42 Smt

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

19 100 required spacings and frame alround, square or 100.17 kg

round bars with round headed bolts and nuts or by screws

(A) Plain Grill.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10 cm.

20 1 x 7 cm. size including 3 coats of oil painting to wood 4102.54 Smt

work etc.complete.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame

21 1 cm.x7 cm. size including 3 coats of oil painting to 4332.47 Smt

wood work etc.complete.with wooden louvers plank 12mm

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian

teak wood frames 10 cm x 7 cm. size including

22 1 anodized alluminium fixtures and fastenings including 4595.06 Smt

primer coat of approved quality and two coats of oil

painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian

teak wood frames 10 cm x 7 cm. size including black

23 1 enamelled iron oxidixed fixtures and fastenings 5285.45 Smt

including primer coat of approved quality and two coats of

oil painting etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak wood

frames 10 cm x 7 cm. size including anodized alluminium

a 1 fixtures and fastenings including primer coat of approved 4940.25 Smt

quality and two coats of oil painting etc, complete. (iii) Partly

panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE

SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S.tubes of 19 gauge thickness and

size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for

top and bottom rails.M.S. frames hall have a coat of

steel primers of approved make and manufacture, M.S.

frames hall be covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 x 50 mm formings tiles,

and 5 mm thick 75 mm wide PVC sheets for to prail, lock

rail and bottom rail on either side, and 10 mm (5 mm x 2)

24 2 thick, 20 mm wide cross PVC sheet as gap insert for top 1135.02 Smt

rail and bottom rail, Panelling of 5 stiles and rails with

mm wide x 5 mm thick PVC sheet beading on

eighter side, and joined together with solventcement

adhesive,. An additional 5 mm thick PVC strip of 20 mm

width is to be stculkon the interiors side of the ‘c’

channel using PVC solvent cement adhesive etc.

complete as per direction of Engineer incharge,

manufacture’s specification and drawing.

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonal 20 x 5 mm size with top and

bottom rails T iron 40 x 40 x 6 mm with 38 mm dia steel

pulleys complete with bolts, nuts, locking arrangements,

stoppers, handles, including a priming coat of red

lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding

shutters with frame and diagonal braces of 40x40x6

mm angle iron, 3.15 mm M.S.gusset plates at Junctions

and corners 25 mm dia. pulley, 40x40x6 mm

26 1 angle and T-iron guide rail at top and bottom 3652.12 Sqm

respactively with handles, stoppers and locking

agangement etc, including applying a priming coat of

red lead paint.

Providing & Fixing in position Alluminium doors with

frame using approved quality anodised extruded

alluminium section as approved by Engg.in

charge(Jindal alluminium) (a) Frame sections 101.6x44.45

mm (b) Shutter bottom vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

section at 114.3x44.45 mm at (1.37kg/mt) Shutter

27 1 middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing 2900.00 Smt

& installing 5 mm thick approved color Acrylic

sheet of standard quality fixed with glazing chips on

upper pannel & Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in

Providing and fixing extruded aluminum window having

extruded aluminum Colour r Powder Coated section frame

main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384

Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of

size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt

with sliding shutters of horizontal member size 40mm x Sq.

28 1 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of 2119.14

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Providing & Fixing in position Alluminium vents with

frame using approved anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

alluminium) units equivalent Approved Rate)Frame

29 1 section of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl. 1950.00

Providing & Installing 5 mmthick approved color Acrylic

sheet of standard quality etc. comp.

Providing and fixing standared extruded of

alluminium section of size 63 mmx38.10 mmx1.2 mm

(Jindal Section:2434, or equivalent @ Wt.0.643 Kg/mt) Sq.

30 1 with colour anodized alluminium frame for 1163.92

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg /

31 2 Rmt with colour Powder Coated alluminium frame with 5 2141.88 Sq.M.

mm thick transparent bronze colour tinted float glass as

details etc complete for Fix Partition

Providing and laying 40 mm thick marble chips flooring

rubbed and polished (I.E.terrazo) to granolithic finish with

under layer 30 mm thick cement concrete1:2:4 (1-Cement:

2-coarse sand: 4-graded stone aggregate 10 mm

and down gauge) and to player 10 mm thick with white,

black or white and blak marble cihps of required sizes from

1 mm to 4 mm nominal size laid in cement marble powder

32 2 mix 3:1 (3- Cement:1-Marble powder by weight) in 811.13 Sqm

proportion of 4:7 (4- Cement: 7-marble chips by

volume) (C) Medium Shade pigment with approx

50% white cement and 50% ordinary cement (In top

layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or

dedo rubbed, and polished to Granolithic finish to player

mm white, black or white and black marble chips of

size from smallest to 4 mm nominal size laid in cement

33 2 marble powder mix 3:1 (3-Cement: 1 marble powder 869.40 Sqm

by weight) in proportion of 4:7 (4-cement marble powder

mix: 7-marble chips by volume) (B) Light shade pigment

with white cement (In top layer only)

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

34 10 cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with 908.17 Sq.M.

Providing and laying Ceramic tiles 6 mm thick in flooring

treads of steps and landing laid on a bed of 12 mm thick

35 20 cement mortar 1:3 (1- cement :3-coarses and) finishing 960.47 Sq.M.

with flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished

Decorative Granite Board with Computerised Golden

36 2 Letters Discription as per instructions of engg. 4304.00 No.

in charge to M.S. frame structure for

Inaugaration & Public Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36''

in flooring treads of steps and landing laid on a bed of

37 10 12 mm thick cement mortar 1:3 (1-cement:3-coarses 1469.91 Sq.M.

and) finishing with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24''

in skrting risers of steps and dedo on 10 mm thick cement

38 4 plaster 1:3 (1- cement: 3-coarse sand) and 1130.15 Sqm

jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in

skrting risers of steps and dedo on 10 mm thick cement

39 5 plaster 1:3 (1-cement:3- coarse sand) and jointed 1523.61 Sqm

with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

24'' in flooring treads of steps and landing laid on a bed of Sq.

40 10 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) 1062.50

finishing with flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm

th.Double Charged Gloosy / Matt tiles of Approved

make as Approved by Adl.C.E. / Consultants for upto

cm high skirting as approved by Engineer in charge

41 15 over 10 mm thick cement mortar 1:6 (1 cement : 6 coarse 165.00 Rmt

sand)on new surface& jointed with colour cement slurry

incl with flush pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring

over 20 mm (Average) thick base of cement mortar

1:6 (1-cement:6-coarses and) or L.M.1.1.5 (1-

42 8 Lime putty:1.5-coarses and) laid over and jointed with 982.83 Sq.M.

grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc.

complete. (A) 25 mm thick

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid

43 1 and jointed with gray cement slurry including rubbing and 2194.63 Sq.M.

polishing complete. (A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring

over 20 mm (Average) thick base of cement mortar

1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid over

44 5 and jointed with grey cement slurry including rubbing 1085.48 Sq.M.

and polishing etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in

risers of steps, skirting Dedo and pillars laid on 10 mm thick

cement mortar 1:3 (1-Cement :3 coarses and) and

45 5 jointed with gray cement slury mixed with pigment to 1176.03 Sq.M.

match the shade of slab including rubbing and

polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarses and:4-graded stone aggregate

46 5 20mm nominal size) laid in one layer and finished with a 297.68 Sq.M.

floating coat of neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarse sand:4-graded stone aggregate

47 5 20mm nominal size) laid in one layer and finished with a 348.08 Sq.M.

floating coat of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

48 10 white cement including rounding off junctions and 739.89 Sqm

extending them up to15 cm along the wall, clearing with

water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the

size 300 mmx200 mmx8 mm/300 mmx450 mmx8 mm

49 1 in skirting, risers of steps and dedo on 10 mm. thick 1426.95 Sqm

cement plaster 1:3 (1cement: 3 coarse sand) &

jointed with white cement slurry.

Providing ridges or hips 600 mm overall in plain G.I.

sheet class-3 fixed with G.I. J or L Hooks and nuts

50 1 mm dia G.I. Limpet and bitumen washer complete. (1) 635.58 Sqm

0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm over all semi

circular plain G.I.sheet class-3 gutter with Iron brackets

51 1 40 mmx3 mm size Bolts, Nuts, washers etc. 555.71 Sqm

including making necessary connection with rain water

pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing

treatment with bitumen felt consisting of second and

fourth course of blown/ bitumen or/and residual

bitumen applied hot at 1.2 kg.per Sq.M.of area for

each course and first course with fibre base bitunen

saturated under lay type land third course with fibre base

52 5 self finished felt type 2 grade 1 and fifth and final course 466.84 Sqm

of stone grit 6 mm and down size or pea sizes gravel

spread at 0.008 Cu.Metre/Sq.metre

preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe

including filling the joints with spun yarn soaked in neat

53 1 cement slurry and cement mortar 1:2(1- Cement : 283.62 Rmt

2-fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat

on Rough (Similar) side of single or half brick walls for

54 45 interior plastering up to floor two level and finished 174.83 Sqm

even and smooth in (i) Cement mortar 1:3 (1-cement :3-

Providing 20 mm thick sand faced cement plaster on walls

upto height 10 metres above ground level consisting of

55 10 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) 297.68 Sqm

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Colour washing with lime on wall surface (two coats)

over and including a primary coat of white washing to

56 23 give an even shade after through brooming the surface to 12.29 Sqm

remove all dirt, dust, mortar drops and other foreigh

Removing dry or oil bound distemper by a

washing and scraping and sand papering the wall

57 10 surface smooth including necessary repairs to 11.19 Sqm

scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall

surfaces of given an even shade, over and including

58 43 a priming coat of whiting after thoroughly brooming 46.94 Sqm

the surface free from mortar dropping and other

foreign matter.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required

shade on wall surfaces to give an even shade, over

and including a priming coat with distemper primer

of approved brand and manufacture after

thoroughly brushing the surface free from mortar

dropping and other foreign matter and also

including preparing the surface even and sand papered

Extra Coat for Above Item over above for every

60 5 subsequent coat of approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

61 45 brushing the surface free from mortar droppings and 78.44 Sqm

other foreign matter and sand papered smooth.

Extra over item for every sub sequent coat of wall

62 50 painting with plastic emulsion paint of approved brand 33.39 Sqm

Extra over item for painting with plastic emulsion paint of

62 a 40 approved brand on ceilings and sloping roofs. 5.36 smt

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other

63 30 foreign matter and scoured with brushes fine steel wood, 34.34 Sqm

scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

64 25 brushing, interior to give an even shade including 86.94 Sqm

cleaning the surface an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

65 55 enamel paint, brushing to give an even shade including 54.35 Sqm

cleaning the surface of all dirt, dust and other foreign

66 10 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new

steel and other metal surface with synthetic enamel

67 5 paint, brushing to give an even shade including cleaning 64.66 Sqm

the surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on

previously printed steel and other metal surface with

68 5 synthetic enamel paint, brushing to give an even shade 43.79 Sqm

including cleaning the surface of all dirt, dust and other

foreign matter.

Extra over Above item for every sub sequent coat of

69 5 paint. 43.47 Sqm

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and vent

pipes and fittings with ready mixed bituminous brushing,

70 10 black, anti corrosive to give an even shade including 20.16 Sqm

cleaning of all dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and vent

pipes and fittings with ready mixed bituminous brushing,

71 10 black, anti corrosive to give an even shade including 25.05 Sqm

cleaning of all dirt, dust and other foreign matter.(100 mm

Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint,

interior to give an even shade including cleaning

72 40 the surface of all dirt, dust and other foreign matter 26.78 Sqm

sand papering and stopping. (a) Ready mixed paint

brushing wood primier pink.

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface with

73 35 enamel paint, to give an even shade including cleaning the 26.78 Sqm

of all dirt, dust and other foreign matter.(b) Ready mixed

paintbrushing priming for enamel

Extra over Above item for every sub sequent coat of

74 5 paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new

wood and wood based surface with ready mixed

75 45 paint, brushing, oil, gloss, semi gloss to give and even 104.12 Sqm

shade including cleaning of all dust, dirt and other

foreign matters and papering and stopping.

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

76 30 shape even shade after thoroughly brushing the surface to 113.40 Sqm

remove all dirt, and remains of loose powdered

materials.etc complete

Applying two coats of Birla (white cement based)

or Asian (acryliclapy-putty) or equivalent & two coats

of primer of approved brand and manufacture on new

77 25 wall surface to give an even shade including thoroughly 40.19 Sqm

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to

78 40 give an even shade including 55.13 Sq.M.

cleaning the of all dirt, dust and other foreign matter.

Writing letter or figures on any surface with black per

japan paint (stops, comas, hyphens and the like not to letter

79 50 be measured and paid for separately) (i) Block 3.15

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas

80 5 and disposal of unserviceable materials with all lead and 1047.38 Cu.M.

lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including

stacking of serviceable materil as and disposalof

81 15 unserviceable materials with all lead and lift.(ii) In Cement 544.95 Cu.M.

Dismentaling tiled of stone floors laid in mortar including

82 20 stacking of serviceable materil as and disposal of 47.25 Sqm

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materil as

83 1 and disposal of unserviceable materials with all 47.25 Sqm

lead and lift.(i) G.I.sheet roofing.

Dismentling steel work including distempering and

84 52 stacking the materials with all lead and lift. 2.42 Kg.

Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraves,

85 22 hold fasts and other attachment etc. complete and 185.85 Each

stacking the material within all lead and lift.(i) Not exceeding

3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats

86 30 architraves,hold fasts and other attachment etc. 248.85 Each

complete and stacking the material with in all lead and

lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls

and also including dismentling fencing posts including all

earth work concrete in base and making good the

disturbed ground stacking useful materials as

directed and disposing as directed and

disposing of the unserviceable materials with all lead

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain

88 15 water pipes with fittings and clamps including stacking 74.03 Rmt

the materials with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan

89 20 Indian and Europe an type, flushing tank etc. including 401.63 Each

stacking the materials with all lead and lift

Scraping oil paint from steel and other metal surface

90 30 and making the surface even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old deteriorated plaster

of any thickness from wall / R.C.C member

91 5.00 including stacking of serviceable material and disposal 19.38 Smt

of unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape

92 5 and size as specified in existing R.C.C. slab including 168.53 Each

cutting chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning

93 5 out, wetting, grouting with cement and sand slurry 1:3 64.58 Rmt

(1-cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out

94 5 and filling solidly with a hot mixture of bitumen 75.29 Rmt

and clean dry sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with

frame using approved quality anodised extruded

alluminium section as approved by Engg.in charge(Jindal

alluminium)(a) Frame sections 101.6x44.45 mm

(b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

bottom section at 114.3x44.45 mm at (1.37 kg/mt) Shutter Sq.

95 2 middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing 2900.00

& installing 5 mm thick approved color Acrylic sheet

of standard quality fixed with glazing chips on upper

pannel & Laminated sheet on lower pannel (wtt.0.13

kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly

Panelled Partly Glazed / Fully Glazed Alluminium doors

with frame using approved quality anodised

extruded alluminium section as approved by Engg. In

charge.(Jindal alluminium )(a) Frame sections

101.6x44.45 mm b) Shutter vertical & top section

Shutter bottom section at 114.3 x44.45mm at ( 1.37 kg/mt

) Shutter middle section at 100x44.3 wt. (1.37 kg/mt )

incl. providing & installing 5 mm thick Glass of

standaed quality fixed / 12 mm thick Laminated sheet

with glazing chips (wt. 0.13 kg/ Rmt) in panels etc.

comp. as per Detail Given & direction of engg.in

Providing & Fixing in position Alluminium window

2/3/4 track sliding / fix type with frame using approved

anodised extruded alluminium section as approved by Sq.

97 2 Engg. In charge.(Jindal alluminium) units 4518.00

equivalent. including P/F installing 5 mm thick clear/tinted

Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium vents with

frame using approved anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

alluminium) units equivalent Frame section of 63.50 x Sq.

38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing & M.

Installing 5 mm thick Glass of standard quality etc.

Providing and fixing of Ridge flashing for roof

panel shall be made out of 0.5 mm thick pre

coated GI sheet. The Pre coatedsheet shall be of

minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of minimum

120 gsm as per IS:277:1992, 5-7 microns epoxy

primer on both side of the sheet and polyester top coat

99 1 15-18 micron. The PP GI Sheet shall have plastic 510.10 Sqm

protective guard film of minimum 25 microns to avoid

scratches during transportation. The ridge shall be fixed

to the steel members by poprivetor self drilling/self

stitching fastners @ maximum 450mm c/c along length of

capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface

100 1 having 1-2 mm thickness as per directed by 963.00 Smt

engineer incharge etc as completed (N.S.)

Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40 mm x 40 mm x 6 mm and

oil painting 3 coats fixed at 2.5 Mt, C/c. with five

Horizontan lines and two diagonals of galvanised steel

102 2 barbed wire weighting 9.38 Kg. per 100 Metre, strained 385.40 Rmt

and fixed to posts with G.I, staples including fixing

the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing

any size and also refixing work incl. febrication work

103 2 with all materails to be painted one coat of primer 735.00 Rmt.

and twocoats of paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4,

cm. thick over B.B. masonry in C.M, (1:6) in front and

104 1 dwarf wall 1.0 Mt. high and 23 cm. thick cement 2235.66 Rmt

plaster to masonry / in C.M.1:3) and cement concrete

flooring in 1:2:4: mix 5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm

high resting on B.B. Masonry walls 23 cm. thick in C.M.

(1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm.

105 1 thick slab with marble chips set in C.M. (1:6) (6 mm thick 933.98 Rmt

terrazo) with plastering on exposed faces walls in C.M.

(1:4) etc complete.

Extra rate for using Ready Mix Concrete of any

grade for below ground level to vertical upto any floor

106 1 with delivery & suction Pipe & Pump etc. The rate 760.00 Cmt

includes fule, pump operator, skilled labor, driver etc

completed and as per direction of engineer in charge

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the

surface as per requirement. The rate including all

107 3 machinaries, labor, loading, unloading, 54.00 Sq.M.

transportaion etc complete as per direction given by

engineer incharge.

Carrying out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution on

surface of timber work for termite control including labor and

material etc. complete. Using Chlorpyriphos20 EC as per

6313 2013 Part III (1% concentration by mass) is

108 5 recommended one litre chemical emulsion diluted with 19 54.98 Smt

liters of kerosene. Total diluted concentration will be 20 liters

inclusive of 1 liter chemical emulsion application in drilled

holes and 0.75 / Litre chemical per one Sqmt two coat on

wood surface not protected by paint or varnish.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

109 5 diluted with 5 liters of water application 0.5 litre chemical 88.40 Smt

/Sqm of surface is recommended as per I.S.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite

control treatment including labour and material consist

ment with I.S. specification. Using Chlordene and

Chior purfiles 20 EC. As Per 6131_paret-II

110 5 Consentration Weight on percentis recommended i.e one 104.90 Smt

litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical

emulsion appication attherate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including labour

and material Using Chlorpyriphos 20 ECAs per IS 6313 part

- II (1% concentration by mass) is recommended i.e one litre

111 4 chemical emulsion diluted with 19 liter oil base. Total 37.34 Smt

solution will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per I.S.S

Providing erecting and fixing double coated

Syntex or equivalent PVC.(ISI) water tank of required

112 5 capacity each with all necessary fittings and connection 3.91 Litre

etc. complete on terrace.

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes (Medium grade) of the following

113 nominal bore, tube fitting and clamps including making good

the wall ceiling and floor.

Providing and laying in trenches galvanised mild

steel tubes (Midium grade) of the following nominal

114 bore, and tube fitting (Earth work in trenches to

be measured and paid for separately)

Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main 50 mm to

115 5 mm nominal bore by providing and fixing tee 600.08 Each

including cutting and threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2

working pressure poluthene pipes of the following out

side Dia. Low densidy, complete with special

116 falnge compression type fittings,wall clips

etc.including making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy, complete

117 with special falnge compression type fittings, wall

clips etc. including making good the wall ceiling and

Providing and fixing cast iron (Spun) Nahni trap of

the following nominal diameter of self cleaning design

118 2 with C.I. screaed down or higned grating including 600.08 Each

cost of cutting and making good the walls and floor

mm inlet and 50 mm outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan

(Indian type W.C.Pan) size 580 mm (Earth work,

119 2 bed concrete, foot rest and trap to be measured and 926.10 Each

paid for separately) (A) Vitreous China. (I)Long pattern =

Provdg. & fixing wall mounted White / Color

Vitreous China European water closet with

120 3 integral P trap of "Cera" - Clair Series or equivalent 4250.00 No.

incl. seat cover , Chair Bracket etc. complete as per

direction of engg. In charge.(N.S.)

Providing and fixing wsh down water closet (Europe

an type, W.C.Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar1:1

121 5 (1- Cement:1-fine sand) (Seal and cover to be measured 1290.80 Each

and paid forseparately) (A) vitreous China Pattern :(i)

in white colour

Provdg. & Fixing Flat Back Large Urinal of White/ colour of

"Cera" or " Hindware" incl. C.P. Brass waste coupline

122 4 waste pipe, pvcconnection etc. Complete.( size 635 1850.00 No.

Providing & Fixing Angle cock of " Ess Ess" - Trend

123 5 series or equivalent standard make as approved by 675.00 No.

engg. in charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for

water closet squatting pan including jointing the trap with

124 5 the pan and soil pipe in cement Mortar1:1 (1-Cement : 311.85 Each

1-Fine sand)(A) Vitreous China.

Providing and fixing wash basin with single hole for

pillar tap with C.I.or M.S. brackets painted white

125 4 including sutting holes and making good the same but 1400.18 Each

excluding fittings. (A) Vitreous China: (ii) Flat Back wash

basin 550 mm x v 400 mm size.(i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in walls

126 1 and making good the same but excluding fittings. © 2257.69 Each

Vitreous China Sink. (i) 600 mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge

mirrror of superior glass mounted on 6 mm thick A.C.

127 4 sheet or ply wood sheet and fixing to wooden pluge with 825.48 Each

C.P. brass screws and washers.

Providing and fixing chromium plated brass halftrun flush

128 cock of approved quality including fixing in pipe line etc.

Provdg. & fixing White / Color Vitreous china Counter

wash basin with signle hole for pillar tap of "Cera " -

Concord series of 550 x425 mm size to be fiited in stone

counter with necessary brackets painted white incl.

cutting holes and making good the same .Cost Includes

129 2 P/F C.P. brass waste coupline, 32 mm dia fisher union 2950.00 No.

,15 mm dia. Pillar cock & Angle cock of " Ess Ess"-

Trend series ,32 mm dia. Waste pipe etc. complete

as per dir. of engg. in charge.

Providing and fixing wash basin with single holefor pillar tap

with C.I. or M.S. brackets painted white including sutting

130 2 holes and making goodthe same but excluding fittings.(A) 1400.18 No

Vitreous China:(ii) Flat Back washbasin 550 mm x v400mm

size. (i) In white colour.

Providing & Fixing S.S.304 Grade Sink of Nirali /

131 1 Krishna or Equivalent Make for Kitchen Platform 4650.00 No.

of size : 24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete

132 3 with C.P.brass brackets fixed to wooden plugs with 597.22 Each

C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with

133 2 C.P. brass bracket and guard rail complete mixed to 561.03 Each

wooden plug with C.P.brass screws.

134 5 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following

135 size. (A) Brass screw down bib tap polished bright.

8 (i) 15mm dia. 184.98 Each

8 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following

136 size. (B) Brass chromium plated screws down Bib Tap.

5 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following

137 size. © Gun metal screw down bib tap.

10 (i) 15mm dia. 157.29 Each

10 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw

138 down high pressure with screws, shanks and back nuts.

5 (i) 15mm dia. 305.67 Each

5 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return

139 fullway wheel valve.

5 (i) 15mm dia. 184.98 Each

4 (ii) 20mm dia. 201.80 Each

5 (III) 25 MM DIA 416.47 Each

4 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun

140 flush cock of approved quality including fixing in pipe line

5 (i) 20mm dia. 252.26 Each

5 (ii) 25mm dia. 261.16 Each

5 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

141 5 etc.complete. (A) White earthen ware flat back or corner 1026.01 Each

type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral

142 3 longitudinal flush pipe. (A) Squating plate pattern 1535.63 Each

white earthen ware 550mm x 300mm.

Providing and fixing chromium plated, bottle trap

143 8 with necessary couplings of approved quality for wash 292.87 Each

Providing and fixing ball cock ofapproved quality as

144 4 directed. (A) Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved quality as

145 4 directed. (B)Abonite (i) 25mm dia. 101.89 Each

Filling with good Quality thor as and where directed

by the Architect / Engineer-in-charge, in sunk in layers

146 1 of 15 cm. thickness, including watering, ramming well etc. 3850.00 Cmt

complete, as directed by the Architect / Engineer-in-

Providing laying and jointing in true line and level 15 mm

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

147 22 every two metre C/C or shall be concelled as 71.93 Rmt

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with solvent,

including cost of all materials.adhesive

Providing laying and jointing in true line and level 25 mm

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX

orequivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

148 10 every two metre C/C or shall be concelled as 90.93 Rmt

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 32 mm

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

149 15 every two metre C/C or shall be concelled as 117.97 Rmt

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40 mm

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

150 5 every two metre C/C or shall be concelled as 146.65 Rmt

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50 mm

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

a 10 every two metre C/C or shall be concelled as 193.73 Rmt

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing in line level plumb, fabricating and fixing

three row horizontal barbed wire fencing and punched

tape concertina coil of 9 turns per meter of 610 mm

dia fixed with clips on top of the angle iron posts. The

punched tape concertina coil having sharp barbs at every

25 mm spacing shall be 0.5 mm thick and 19 mm width

and weighting 13 kg/100 mt. (Average) as per manufacture's

151 10 specification. The rate shall also include providing 390.00 Rmt

and fixing 1.20 mt.total long MS angle 40 x 40 x 6 mm

@3.00 mt.c/c spacing embaded in RCC column, angle

posts shall be painted with one coats of red oxide and two

coats of enamel paint of approved quality at top

Fixing sun film for protection sunlight in black or any colour

152 5 as as directd by engineer In Charge.(Market rate) 850.00 Smt

Providing & Fixing 3 mm thick F.R.P.sheet of

Approved Quality & Color / Pattern as per Consultant's

design also includes required fabrication structure in

the grid of 2'-0x2'-0 size using hollow pipe of16 gauge &

size 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon

153 5 paste application for fixing the sheet . Rate also 1930.00 SqM

includesnecessary bending, cutting, labor charges , Zinc

Primer coat & Two coats of oil painting of color as

approved by consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S.

154 1 Supporting Brackets. (N.S.) 400.00 Rmt

Hiring charges for J.C.B.machine inclduing cost of

155 5 fuel, operator, dirver etc.. ( 12 hours sift 600.00 Hrs.

day/night) (N.S.)

To provide tractor with hydraulic trolley, driver, 4 Nos. of

Labor with all tools like bucket drum, showels, trikam,

pavadas, etc,, to carryout different works during

156 5 monsoon for 12 Hrs. Shift. Work shall be carried out 1661.02 No.

as per the instrucitons of Engineer In-Charge.No extra

charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain

fixed on window level on wooden batten and curtain

lift with cotton thin rope, make of aerolax or

157 1 equivalent design and colour as per instruction by 3285.00 Smt

engineer – in – Charge with necessary hardware fitting,

material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of

158 6 765 number) Hardwire or Everite Prabhat or Equivalent 474.58 No.

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia

M.S. bar bent to shape with hooked ends of R.C.C. slabs

159 5 during laying incl. painting the exposed protion of loops, all 124.74 No.

as per standard design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round

160 15 in cement mortar 1:1 including neat cement finishing, 23.45 Rmt

watering etc. complete.

161 10 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced

cementitious micro concrete work in cellings and

beams incl.mixture of CEMSCREED HM (F)

fair mate company material, FBR bonding agent

162 2 material with water in suItable proportion anti 530.00 Smt

corrosive treatment on exposed beam,celling steel bars

with safeCore R incl.all kind of labour etc.comp.including

three coat of white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or

submarcible water pumps withmotor and required cable and

163 2 switch board of approved brand and make etc.comp.as 6800.00 Set

.Providing TMT Bar FE 415 reinforcement for R.C.C. work

163 including bending, binding and placing in position complete

a up to floor two level

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in position

b 100 complete upto floor two level placing in position complete 75.46 Kg.

upto floor two level placing in position complete upto floor

Providing and fixing 30mm thick solid both side prelam PVC

164 10 door shutter (sintex door-equivalent) with necessary 2867.00 Smt

alluminium fitting with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish

earch manure or sludge and excavated rock and fly

165 50 ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.) 235.51 Cu.M.

Providing and laying polished granite stone slab 18 mm

thick in risers of steps, dedo and pllars laid on 10 mm thick

166 8 cement mortar 1:3 (1 cement:3 coarse sand) and jointed 2690.00 Smt

with gray cement slurry including rubbing & polishing

Wall panelling with 12 mm MDF fixed to existing

alluminium framing and making grove as per design and

167 1 finished with royal plastic paint as per instruction of 1688.00 Smt

engineer incharge. (N.S.)

Providing and laying 15mm bamboza wooden

flooring as per architect's drawing with all

necessary details as directed by the project

consultants. Use underlay for better result as per

Detail specifications and directed by the project

consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased)

or Asian (acryliclapy-putty) or equivalent & two coats

169 10 of primer of approved brand and manufacture on new 40.19 Sq.M.

wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape

170 10 evenshade after thoroughly brushing the surface to remove 113.40 Sq.M.

all dirt, and remains of loose powdered materials.etc

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

with both side 1 mm laminate finishing including

anodized aluminum butt hinges with necessary

screws. Decorative type and pine wood core anodized

minimum 3 no 150 mm long aluminum butt hinges in

flush door shutters with 2 no of brass holdfast 325 mm

171 2 long 1 no brass tower bolt 250 mm long and two no of 150 4686.36 Smt

mm long brass door handle . Decorative both side

laminated Flush door 35 mm thick. with frame of

cm x 7 cmt Indian teak wood frame including all

necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to

mtr from GL etc complete as per direction of engineer

P/M/F chainlink jali 8'x4' size as per details sketch &

instructionof engineer in charge same as lal darwaja garden

pattern consisting of 3'dia. M.S black pipe 'A' class 5'4" ht.

fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link

jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle

172 5 frame 8'x4' size with MS flat of size 25x3 mm welded jali 1230.00 Rmt

etc.comp.The jali is to be welded to MS pipe with MS flat as

instruction given.The M.S pipe and the M.S angle frame are

to be painted one coat of primer and two coats of paint as

directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya

stone with well dressed grooveas per directed by engg.in

charge for foundation, plinth or super structure level (above

plinth level upto floor two level) in cement mortar 1:5 (1-

173 cement : 5-fine sand) incl.pointing the joint with white

cement and yellow oxide powder in proportion to match

stone colour the joints should be thread grooved as per exi.

lake stone pitching apperance

(A) stone masonary wall/stone dressed single faced (size

1 (B) stone coping (size 15"x8"x4") 510.00 Rmt

1 (C) stone coping (size 15"x8"x9") 790.00 Rmt

1 (D) stone column (size 15"x15") 10710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685.00 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-

H Kerb block for Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of

Sevaliya/Timbaor equivalent quality for pre-

cast blocks, reasonablyexposed finish/

formwork , mould with well equippedwith vibratory

system for kerb stones of approved design including

curing, etc. complete, including thecost of formwork

etc. complete. The rate shall also include

necessary cutting of asphalt, fixing the Kerbstones in

174 10 line and level on 5 cm thick sand bedding 393.00 Rmt

withnecessary equipments and materials. The rate shall

also include the flush pointing in CM (1:3) for all joints of

the kerb stones. Filling of zari alone the sides of the

kerbstone fixed with Bituminous concrete

Bituminousconcrete / C.C. mixed in proper position to

flush withthe road surface as directed by Engineer

in change to form a portable mixture.a) Laying on 5 cm

thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath,parking areas,

service lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes formworks

using rubber mould, Rate providing and laying paver blocks

as per required grading and specification. The paver block

shall be mechanically compacted. The work of paving

blocks shall be executed in line and level by skill mason of

175 25 flooring work only. It should be laid in such a way that the no 429.00 Smt

cutting of the paver block to be necessary. if cutting of paver

block necessary then it should be cut by machine only and

carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be

compacted and shall be relaid if necessary. Gravel or such

type of materials shall not be allowed for production. Laying

on 5 cms thick sand

Provoding and fixing flush door shutters, solid core

construction with frame of first class hard wood with cross

board and face veneer or ply wood face panels, including

anodised alluminium butt hinges with necessary screws. (B)

176 10 Non- decorative type and block board core anodised 1779.97 Smt

alluminium butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of paving with cement

pointing in CM 1:2, including watering, ramming etc comp.

as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the

177 50 C.C.Block / Nibhada Stone in Line & Level 78.00 Smt

Box type metal letters forming composite box made from

1mm thick stainless steel plate of grade 304 having brush

178 finish of following font size to be fixed at Main Gate in

english and or Gujrati and including fixing charges approved

before fixing by clent / consultant.

A 1 400mm high 1000.00 Nos.

B 1 300 mm high 750.00 Nos.

C 1 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x

mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts,

other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of

179 5 2.64 mm dia x 230 mm long G.I. wire at every junction, 850.00 Smt

including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board

to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square

edges of the board with recomme-nded jointing compound

jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer’s

specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting.

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow)

350 x 500 x 50 mm, Size per color End Cape 350 MM x

MM x 50 MM TOP DESIGN - Lining Top flat ANTI SKID

PATTERN FOR GRIP COLOUR :- YELLOW & BLACK

BODY MATERIAL :- MODIFIED THERMOPLASTICS

180 1 (Polymer Rubberized ) • ECO FRIENDLY RECYCLE 2185.00 Rmt.

RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :-

HOLE HEX Bolts with Washer Epoxy for Bolt Fitting etc.

complete as directed by EIC .

Providing and fixing of Roller blind curtain/blackout. The

fabric shall be woven from formulated platisol extruded over

a polyaster yarn.The fabric shouldl be weaved to provide

181 1 subtle view of the side of the blind and should offer 2610.00 Smt

elimination of glare and sunlight radiance upto a minimum of

80%.The fabric shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false

ceiling with grid type with aluminium frame from

gypsteel, fastners ,props, Finishing as per architectural

182 1 drawing allowing openings for A.C. Diffusers, 933.00 Smt

Light/Electrical Points etc –complete, Prior to fixing on

frame.(Brand : Anutone or equivalent ) (N.S.) or as

directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry

183 2 chamber & water tight G.T.Stone including fixing of 1263.15 No.

covervSquare mouth trap 100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin

184 2 cement mortar 1:1 including neat cement finishing, waterin 23.45 Rmt.

getc. complete.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

185 10 stoneware pipes including testing of pipes and joints 211.05 Rmt.

complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

186 10 stoneware pipes including testing of pipes and joints 288.23 Rmt.

complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

187 2 aggregate 20mm size) foundation concrete 1:5:10 inside 2903.89 Each

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

188 1 with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 3624.51 Each

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i)Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20)

edge kerb having size of 75 x 300 x 300 mm depth and as

189 5 per design conveying it to the site, jointing into C:M 1:3 and 219.00 Rmt.

racking out the joints incl. necessary excavation of asphalt,

soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and

70 cm high resting on B.B.Masonry walls 23 cm.thick in

190 1 C.M.(1:6) with (ii) Fixing black Granitee 30mm thick laid on 754.95 Rmt.

precast R.C.C. (1:2:4) slab with plastering on exposed faces

of wall in C.M. (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x

25mm mesh or weight not less than 7.75 kg. per Sq.M. to

191 1 window frames etc. including60 x 20mm beading of teak 754.65 Smt

Providing & fixing 15 cm wide chicken mesh jali with nails &

192 15 then application of 15 mm plaster on R.C.C.& masonary 35.00 Rmt.

joints as per dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate

193 5 20mm nominal size) laid in one layer and finished with a 348.08 Smt.

floating coat of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water

tank of specified capacity, on specified location, for all

depths, in controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost of form work

and reinforcement,with inside and outside plaster in CM

1 :3 and water proofing treatment as per IWP

specification,including injection, grouting, etc. complete.

The rate includes for providing and fixing two nos. 0.6m.

x 0.6 m. size medium duty CI manhole cover/s at top,

including wash out pipe line and inlet and outlet

connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling

with grid type with alluminium frame consisting of

600mm x 600mm 3mm thick plain PVC sheet used as

panel insert in a frame work made using anodized

alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge

or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600

195 5 x 600mm) The alluminium frame work is supported from 300.12 Smt

the cceiling with the help of G.I. hook and G.I. wire/6mm

M.S. rods of required sizes to maintain proper level etc.

The aluminium frame work is supported on side wall with

the use of alluminium L section of size 1 x1 (25 x 25mm)

angles etc. complete as per direction of Engineer in

charge. Manufactures specification and drawing.

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other, or

196 5 for any other work as directed by Engineer In charge. The 551.00 No

Rate includes Handcart with Mazdoor

A 5 Mukadam/supervisior/karigar 425.00 No

B 10 Fitter/Plumber/Mason 697.00 No

C 5 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost

D 4 of welding rods/gas, Transportation, including carting 1500.00 No

from site to work place.

E 10 Mazdoor at Day Female 450.00 No's

E 10 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or

asphalt demolishing work on site by using operator, fuel,

power supply etc.complete as directed. (no payment

197 10 should be allowed for non working condition of 1071.42 Shift

machinery and for pipe line excavation and M.H. work.

Allowed only for break down work) (Based on Previously

approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

198 Nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.

A 10 15 MM DIA 165.21 Rmt

B 5 20 MM DIA 202.97 Rmt

C 5 25 MM DIA 247.25 Rmt

D 5 32 MM DIA 330.36 Rmt

E 5.00 40 MM DIA 437.66 Rmt

199 5 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without

200 5 frame for Gulley trap (Standard pattern) te weight of 491.80 Each

cover to be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy,

complete with special falnge compression type

fittings, wall clips etc. including making good the wall

ceiling and floor.

Providing, Fabricating & Fixing signage's using 304 grade

Stainless steel 1.5 mm thick brushed steel finish plate (2 nos)

with 8mm thk. Acrylic sheet covered with vinyl of approved

colour, sandwiched between two S.S plate and fixed with s.s

struds . Sandwiched plates should be fixed in 12mm X 12mm

S.S 1.5mm thk.304 grade frame and punched (laser cut)

lettering carried out on both the s.s plates of required size and

text as directed by Engineer and hanged to ceiling with the

help of S.S 8mm thick chain at both ends with making all the

fixing arrangement to the ceiling and to the plate etc. complete

all As per drawings and design supplied by architect and

instruction given by authority and E.I.C.

Providing and applying approved coloured chips 20mm thick

STONE CREAT PLASTER for exterior / interior side on wall up to

full height from ground level consisting of 12mm thick backing

coat of CM 1:3 (1 cement : 3 Bodeli sand) and 8mm thick

finishing coat of CM 1:1 (1 cement (Grey / White / Colour :

203 5 stone grit (approved coloured chips)) including providing & 709.60 Sqmt

fixing 300mm wide strip of chicken net at vertical and

horizontal joints of RCC and masonary including 10mm

alluminium channel for expantion joint / grooves, curing,

necessary scaffolding in true line and level etc. complete as

directed by EIC.

Providing and laying plain dressed surface machine cut

dhrangadhra stone slab of approved quality for dedo, & risers

of steps, etc. over 12mm (Average) thick base of cement mortar

1:4 (1-cement : 4-coarse sand) or L.M. 1.1.5 laid over and jointed

204 1 with cement slurry including surface dressing, rubbing, 2289.67 Sqmt

providing grooves, rounding the edges and polishing for proper

finishing etc. complete size & pattern as per

drawing/instructions of EIC/Consultant.

Proviging and Fixing Storage Shutter made out of 50mm X

mm Indian Teakwood Frame and 18 mm Ply Board. With 1 mm

thick laminate finish in the front and 0.8 mm thick Laminate on

Back Side with 12 mm thick Indian teakwood beading. The

scope also include providing and fixing s.s. finish hardware as

205 1.00 per the Requirement. The rate include cost of all labour,

material and with all hardware like handle, magnate, tackels,

adhesive, screws, etc.for satisfactory completion of this

items.All Exposed Wood Work shall have malamine polish etc.

Providing & Fixing Sun Control Reflective Type Film / Frosted

206 1.00 Film as Selected by Architect/ Engg. In Charge For Glass 646.37 Sq.mt.

Doors / Windows etc. as Directed.

Providing & Fixing in Position Vertical Roller Blinds with

Minimum 3 % and Maximum 5 % Light Transperace Screen

Fabric Incuding Providing & Fixing of Powder coated G-

Channel at the Topof Window with necessary Screw , Cleats

etc. and PVC Roller ( Weight Pipe) and PVC Chain For Up and

Down Movement of Blinds etc. of Approved Make and as per

207 1.00 Drawings / Instruction of Engg. in Charge For All Colors and 1372.03 Sq.mt.

Shades. Rates Includes all Lead and Lift For All Floor Level, All

Height , All Material , Accessories, Fixing , Scaffolding , Labor

etc. Complete in All Respects. All Required Accessories &

Material must be From Same Manufacturer.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

208 2.00 with bitumen and G.I. limpet washer or G.I. limpet washer. filled 719.93 Sqm

with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet

fixed with G.I. J or L Hooks, Bolts and nuts glavanised iron J or

209 1.57 L Hooks Bolts and nuts 8mm dia G.I. Limpet and bitumen 1042.78 Sqm

washers complete

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type sections, in framed work,

including cutting, hoisting, fixing in position and applying a

210 10.00 priming coat of approved steel primer all complete as per the

structural designs and directions of Engineer in charge.Column

Providing and laying 18 mm thick polished granite stone

machine cut in single piece (Max. available) in sill and jambs of

door ,window,ventilation & lift wall cladding,staircase flooring

landing, risers & treads, skirting laid over 10 mm thick cement

mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey

211 1.00 cement slurry with matching pigment incl. rubbing and

polishing,half rounding edge and incl. fixing of hilty fastener at

every 1/3 span of sill as required size etc. complete colour and

shed as approved by architect engineer in charge.

Supply and Fixing of Auditorium seating Fabricate

Auditorium seating with Synchronized Push back Chair

with Ergonomically designed Poly Urethane foam for seat

and back made my DOW chemical with High Pressure

moulding technology to achieve long life performance,

upholstered with stitched 3 Layer 100% Yarn Dyed fabric

Upholsteries. Chair profile with the seat in Normal

position and without a tablet arm should not be more

than 75 cm. Chair pushback mechanism should consist of

2 nos. x DIA 50 mm ZYTEL Based Rollers which is

supported by AXIAL shaft of DIA 12 mm is Driven by

radial movement of 4 set of Swing Arms of size 25mm x

mm thickness with Orbital Riveted Solid Dia 8 mm Barrel

MS Rivets. The pushback movement is achieved by

synchronised movement of 04 links mounted on Two

Number of triangular Symmetrical housing of size 27 cm

x 23 cm duly embossed for extra strength by 1.2 cm

made up by 0.12 cm CRCA compliance to IS 513. The

entire mechanism should be made in India and should

have total weight 8.5 kg duly Powder Coated – NO

SPREAY PAINT Part should be used for the chair of The

Seat Size should be 42 cm x 48 cm the Back height should

be 70 cm with ergonomically designed seat and back

cushions. Chair should be available in 20”, 21”, 22” and

23” to use multiple seat size in one layout for

matching variable arch length. Approved Make WIPRO,

Godrej, TSI, HNI, Featherlite (Including Fitting and

Transportation)

% ABOVE Or % BELOW (in words also)

CONTRACTOR'S SIGNATURE DY.CITY ENGINEER

& STAMP (North West Zone)