Repairing and Renovating the old chora at Nari Village.

Excavation for foundation upto 1.5 m depth including sorting

1 out and stacking of useful materials and disposing off 77.00 255.13 Cum

the excavated stuff ALL lead.(A) Loose or soft soil

Govt. R&B / SOR - 2024-25 / item code - 04001 A + 04005E 0.00

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Foundation and Plinth

AS PER R.A. 0.00

Providing laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost

of reinforcement for reinforced concrete work in GROUND

BEAMS / PLINTH BEAMS

AS PER R.A. 0.00

Providing laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost

of reinforcement for reinforced concrete work in COPPING

AS PER R.A. 0.00

(i) Uncoursed Rubble Masonry with hard stone of approved

5 quality in foundations and plinth in Cement Mortar 1:6 (1- 39.50 2592.84 Cum

cement : 6-coarse sand including levelling up etc. complete

Govt. R&B / SOR - 2024-25 / Ch.no.7 / Sr.no.1 / item code - 07001A /

Brick work using common Brunt clay building bricks having crushing

strength not less than 35 Kg./Sqcm. In foundation and plinth in cement

mortar 1:6 (1cement : 6 fine sand) (B) Conventional UP TO PLINTH

Govt. R&B / SOR - 2024-25 / Ch.no.6 / Sr.no.9 / item code - 06002 B / 6.13 0.00

Brick work using common Brunt clay building bricks having

crushing strength not less than 35 Kg./Sqcm. In foundation and

plinth in cement mortar 1:6 (1cement : 6 fine sand) (B)

Conventional FOR GROUND FLOOR

AS PER R.A. 0.00

Half brick masonry in common brunt clay building strength not less

than 35 Kg./Sqcm. In cement mortar 1:3 (1cement : 3 coarse sand)

8 with 2 Nos. of 6 mm. Diameter mild steel round bars after every three 51.00 692.66 Sqm

coarse embedded in cement mortar in foundation and plinth for up to

floor two level

Govt. R&B / SOR - 2024-25 / Ch.no.6 / Sr.no.80 / item code - 06009A / 6.31 0.00

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Govt. R&B / SOR - 2024-25 / Ch.no.4 / Sr.no.26 / item code - 4006 / 4.12 0.00

Filling in foundation and plinth with murrum or selected soil in layers of

10 20cm. thickness including watering, ramming and consolidating etc. 49.00 304.59 Cum

Govt. R&B / SOR - 2024-25/ Ch.no.4 / Sr.no.29 / item code - 4008A 0.00

Providing and laying controlled cement concrete M-250 and

curing etc. complete including the cost of form work but

excluding the cost of reinforcement For reinforced concrete

work in R.C.C. Lintel For Ground floor.

Providing and laying controlled cement concrete M-250 for reinforced

concrete chajjas not exceeding 23 cm. thickness up to floor two level

including finishing the exposed surfaces with cement mortar 1:3

(1cement :3 fine sand) to give a smooth surface centring and form

work and curing complete excluding cost of reinforcement for Ground

Providing TMT Bar FE 500D reinforcement for R.C.C. work

13 including bending, binding and placing in position complete 1283.00 77.28 Kg

upto floor two level

Govt. R&B / SOR - 2024-25 / Ch.no.5 / Sr.no.39 / item code - 05014C/ 5.4.11

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws.

(B) ORNAMENTAL GRILL

AS PER R.A. 697.00 171.70 kg

Providing,supplying, making, eracting and Fixing M.S.safety grill of

required patern for windows/Door using M.S. polished bars, M.S.Flats

and rectangular CRC pipes of required size at required spacing as per

design and hold fast with coach bolts including cutting, hoisting, fixing

in position with one coat of primer and two coats of matt finished oil

painting etc. complete.

Providing 15 mm. Thick cement plaster in two coats on fair

side brick / concrete wall for interior plastering consisting of

16 mm. Thick backing coat of cement mortar 1:4 (1-Cement : 4- 148.00 200.08 Sqm

sand) and 3 mm. Thick finishing coat of C.M. 1:1 (1-cement : 1-

fine sand) etc. complete for Ground floor.

Govt. R&B /SOR - 2024-25 / Ch.no.17 / Sr.no.18 / item code - 1700202a 0.00

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Govt. R&B /SOR - 2024-25 / Ch.no.17 / Sr.no.18 / item code - 17009/17.95 0.00

Finishing wall with whether exterior emulsion paint on wall

surface on wall surface (two coats) to give required shape

18 even shade after thoroughly brushing the surface to remove all 163.00 122.13 Sqm

dirt, dust, and remains of loose powdered materials. Etc

complete.paint is compare to asian apex/apex ultima

Govt. R&B / SOR - 2024-25 / Ch.no.19 / Sr.no.34 / item code - 19031 0.00

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

19 give an even shade including thoroughly brushing the 311.00 84.81 Sqm

surface free from mortar dropping and other foreign

matter and sand papered smooth.

Govt. R&B / SOR - 2024-25 / Ch.no. 18 / Sr.no.31 / item code - 18031 / 23.80 0.00

TEXTURE PAINT:- Providing & applying texture paint on

exterior as well as interior wall as suggested by engineer

AS PER R.A. 36.00 1262.50 Sqm

Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

21 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with 101.00 1135.48 Sqm

gray cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete.

Govt. R&B / SOR - 2024-25 / Ch.no. 14 / Sr.no.75 / item code - 14013 /

22 Extra for mirror finishing on kota stone

Providing and fixing marble(granite) name plate of approved

size as directed

AS PER MARKET RATE 0.00

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on surface

on wall/ceiling complete with 6A Modular type switch / bell push & accessories

23 and earth continuity of following type, erected on PVC / Metallic box, single 5.00 454.50 Point

mounting base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid

PVC pipe and accessories Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

24 accessories with earth continuity of following type erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe

and accessoriesCat. III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on

25 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded 0.00

wire of green colour for earth continuity of following size (a) with medium class

Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm

(b) 2 wire 1.5 sq.mm. 50.00 90.90 Rmt

Miniature circuit breaker single pole 6A to 32A suitable to

operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Approved make C.F.L. Retrofit 13/15/18 Watt erected if

required Cat.III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA polyester powder

coated and high U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 120 to 300 V,Power Factor

28 more than 0.9, THD < 10 %,CCT 4000 K to 6500K, Uniformity ratio

>0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE

/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED

used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)(A) Tube

Light with integral/ non-integral driver(c) 20-22 Watts, Surge - 4KV,IP-20 Cat-lll

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

29 sweep complete having 3blades with aluminium blades with , canopy & 30 5.00 2070.50 Nos

cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make

shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

30 down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core 3.00 161.60 Nos

flexible wire with earthing.

31 ELECTRIC CONECTION Charges 1.00 8080.00 job

Providing and fixing wooden planks ceiling with tounged and

grooved jointing and wood screws (frame work and cover

fillings to be measured and laid for separately) (A)Indian Teak

wood (iii) 25mm thick

Govt. R&B / SOR - 2024-25 / Ch.no.19 / Sr.no.34 / item code - 16001CA 0.00

Providing wood work in frames of false- ceiling, partitions etc

sawn and put up in position. (A) Indian Teak Wood

Govt. R&B / SOR - 2024-25 / Ch.no.19 / Sr.no.34 / item code - 10003A 0.00

Complet floor covering work on wooden structure with HDPE

34 100micron sheets with appropiate adhesive (pidelite), and also 75.00 140.39 sqmt

directed by incharge engineer/ employee.

Providing wood work in Trusses, Purling, Rafter, Post,Post

35 Plates, wall plates and the like wrought framed, hoisted and

fixed in position (A) Indian Teak Wood

Govt. R&B / SOR - 2024-25 / Ch.no.19 / Sr.no.34 / item code - 10002A 30.00 1387.59 Cum

Fitting fixing of decorative wooden eaves of 15mm thick with

necessary design given by the engineer in charge

Appliying priming coat with wooden putty, over new wood and

wood based surface after and including preparing the surface

37 by throughly cleaning oil, grease, dirt and other foreign matter, 470.00 40.59 sqmt

sand papering and knotting. (C) Ready mixed paint brushing

priming for enamel

Govt. R&B / SOR - 2024-25 / item code -

Painting two coats (excluding priming coat) on new wood and

wood based surface with enamel paint or touchwood, interior

to give an even shade including cleaning the surface of all dirt,

dust and other foreign matter sand papering and stopping

Govt. R&B / SOR - 2024-25 / item code -

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As

39 Per 6131_paret-II Consentration Weight one percent is 95.00 60.88 sqmt

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Govt. R&B / SOR - 2024-25 / item code -

Carrying out timber treatment to all wood work including drilling

holes and spraying oil based chemical solution on surface of

timber work for termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III

40 (1% concentration by mass) is recommended one litre 342.00 76.03 sqmt

chemical emulsion diluted with 19 liters of kerosene. Total

diluted concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not protected

by paint or varnish.

Govt. R&B / SOR - 2024-25 / item code -

Manglore tiles roof covering Providing and fixing tiles roofing

41 with manglore tiles 121.00 280.44 sqmt

including teak reepers of sizes 50mm x 25mm

Govt. R&B / SOR - 2024-25 / item code - 15010A

Providing and fixing Manglore pattern Ridge tile(0.40X0.25m)

42 with neccesary Cement Mortar jointing as directed by engineer 25.00 325.22 Rmt

Providing fixing a 60"X48" potrait printed in good quality with

frame of maharaja saheb of Bhavnagar Krishnkumarsinhji

Providing fixing 3D interior wall paper on wall with all

44 necessary treatment of map of Bhavena as instruction given by 25.20 1515.00 job

engineer incharge.

"Providing and fixing gypsum board false ceiling consists at G.I

perimeter channels of size 0.55 thick having one flange of

mm and another flange of 30 mm and web of 27 mm along with

perimeter of ceiling, screws fixed to brick work / concrete /

partition with help of nylon sleeves and screws at 610 mm

centre. The suspending G.I. intermediate channels of size

mm(0.9 mm thick with 2 flangs at 15mm each from the soffit at

1220 mm centrewith ceiling angles of width 25mm x 10mm x

0.5 mm thick fixed to soffit withG. I cleat and steel expansion

fastners ceiling section of .55 thick having kurled web 51.5 mm

and 2 flangs at 26 mm each with lip at 10.5 mm are fixed to

intermediate channel with help of connecting clips and in

direction perpendicular to the intermediate channel at 450mm

centre to centre including 12.5 mm tapered edge Gyp board

conforming to IS 2095 – 1982 is then screw fixed to ceiling

section with 25mm dry wall screws of approved quality and

make at 230mm centre, screw fixing is done mechanically with

drilling machine with suitable attachment. Finally tapered

edges at the cupboard are to be joint and finished so as to

have a flush look which includes filling and finishing with

jointing compound, paper tape etc. complete. Rate to be

included all kinds of profiles, upright, curves,cutouts required

for light fixtures, speakers, sprinklers, smoke detectors, trap

doors, A.C. grill, diffuser etc including additional support if

required of duct portion, marking grid on ceiling, including all

drops, offsets, curvature small moulding and in desired

geometrical pattern, including 2 coats of primer, plaster putty

and minimum 3 coats of plastic Emulsion paint as per

Providing, fabricating, assembling, hoisting/ erecting and fixing

in position at all heights/ all shapes & sizes with all leads & lifts

using MS Rolled Steel Sections, Hollow sections, MS Plates/

sheet, Flats, Bright Bars, Anchor bar, deep threaded MS bolts,

threaded J bolts, insert plate, support plate etc as per drawing

and all confirming to latest relevant IS codes for steel

structures like staircases, railings, handrail, pergola, decorative

gate, grills, platforms, brackets, monkey ladder or similar etc.

including straightening, cutting, bending, bolting and welding

the members, scaffolding/ staging etc. complete and

comprising of :

i) Profile Cutting of components to required length/ width and

shape/ profile;

ii) Smooth grinding/ machining of edges/ faces/ all welding

iii) Necessary welding (electric arc welding) in required weld

length and size;

iv) Machine drilling of holes for joining/ anchoring

Standard measurements will be paid for as actual cut length

used at site. The rate shall include dry sanding, degreasing

(wet cleaning) & preparation of rust free surface manually or

mechanically, metal putty to make the surface even and

smooth, 2 coat zinc chromate yellow oxide primer and 2 coat of

enamel paint of approved make, shade and finish over all the

surfaces of the steel sections.

Note: The contractor shall be submit shop/ fabrication drawings

based on construction drawings for approval from the Architect

and Engineer in charge. The fabrication work shall start only

after approval of the fabrication drawings submitted by

Providing corrugated G.I. sheet of class-3 roofing fixed with

galvanished iron J or L Hooks, Bolts and nuts 8mm diameter

47 with bitumen and G.I. limpet washer or G.I. limpet washer. 65.00 726.92 Smt

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses. (1) 0.80 mm thick sheet.

Govt. R&B / SOR - 2024-25 / item code - 15001A

Providing ridges or hips 600 mm overall in plain G.I. sheet

48 class-3 fixed with G.I. J. or L Hooks and nuts 8 mm dia G.I. 30.00 658.12 Rmt

Limpet and bitumen washer complete. (1) 0.80 mm thick sheet.

Govt. R&B / SOR - 2024-25 / item code - 15002A