Renovation of Regulator shutters of Kunduchira Anicut and repairs to Marukandy VCB on the leading channel of Kunduchira anicut in Thalassery Municipality Kannur District

Amount

Dismantling of the existing 2 nos of shutters , their hoisting mechanisms and operating platforms

od28336/2020_2021/MH : Dismantling of the canal shutters ( up to 2 Tonne weight)/ Hoisting unit/ Embedded parts etc of the same and stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by the departmental officers at the site (weight of the un serviceable shutters and embedded parts may be calculated as 60% and un serviceable hoisting units as 80 % )

od28357/2020_2021/MH : Chipping the groove for fixing embedded parts of shutter including cost of materials, conveyance , hire charge, labour and other incidential charges etc complete

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply of materials, fabrication,painting and erection of 02 nos of MS shutters, embedded parts and their hoisting mechanisms

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od64069/2019_2020/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for planing, welding,shearing,grinding etc,lead and lift, conveyance, incidental and handling etc complete

od65915/2019_2020/MH : Fabrication, erection of Embeded parts for canal shutters (up to 2 tonne weight) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , all leads and lifts ,incidental and handling charges etc complete but excluding cost of material already supplied

od54131/2019_2020/MH : Supply of M.S Bolt with nut and washer

od64066/2019_2020/MH : Supplying and fixing cast steel thrust roller assembly having 120mm Dia, 50mmtread width, SS(304) shaft and accessories as per approved specifications and drawings including cost of allmaterials, machineries, labour , all lift and lead, incidental and conveyance charges etc completeRate analysis for Thrust roller-1

85.103 : Supply of MS checquered plates including cost of conveyance charges

od54132/2019_2020/MH : supply of GI pipe 32mm dia

od66972/2019_2020/MH : Fabrication and supply of Structural steel canal shutters (upto 2 tonne weight)/Hoist Bridge /Platform and accessories etc . for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od28537/2020_2021/MH : Erection of the canal shutters (upto 2 tonne weight)/ Hoist bridge/Platform including handrails .ladder,etc. for the same including alignment correcting and setting complete including cost of all machinery, labour, incidental and conveyance ,lead and lift charges etc complete but excluding cost of materials already supplied.

Supplying and fixing of rubber seals

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Overhauling of hoist mechanisms

od54128/2019_2020/MH : Overhauling of gearbox & Screw rods for regulator shutter, including changingdamaged , greasing the gear teeth, straightening bent screw rod etc. andproviding locking arrangement for screw rod complete as directed by the Departmental officials at site. Costincludes cost of all materials and labor complete.

Providing ring bunds and bailing out water

od67317/2019_2020/MH : RING BUND Type-I-Putting up ring bund as per approved shape 7 m bottom width, 2 m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 1m apart and filled in between with puddle clay to form bund for an average height 3.5 m including labour dismantling the bund after completion of the work etc. complete.

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

MONZER MAMMOD

Bidder Name

ROLF ENGINEERING CO.

MONZER MAMMOD