MPGF Chimakurthy Mandal

Clearing Juliflora (Prosafis) jungle including up-rooting and removing of Juliflora stumps. etc complete. SSR from ROAD & BRIDGE WORKS RATES OF MATERIALS & WORK ITEMS ..112(d) of current SSR (2025-26). MAT-00482

Scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per Technical Specification Clause 301.4. MORD.

Construction of Sub Grade with Quarry waste(Table 400.13) by mix in place method normal construction of granular sub base by providing Quarry waste material spreading in uniform layers with motor graded on prepared surfce mixing by mix in place method with rotavator at once and compacting with Vibratory Roller 80-100 kN r to achive the desired density complete as per clause 401.4 as per technical specification clause 408 MORD

Construction of Granular Sub-Base by providing well graded HBG material (Grading III material) (Table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / vibratory roller to achieve the desired density, complete as per Technical Specification Clause 402 MORD including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of Engineer in charge.1 , including Over Head But excluding Seignorage Charges and GST desired density, complete as per Technical Specification Clause 401 MORD / MORTH. but excluding VAT & Seigniorage charges. desired density, complete as per Technical Specification Clause 401 MORD / MORTH. but excluding VAT & Seigniorage charges.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD

Shoulders are Filling the Selected Earth for Levelling the site as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH but excluding GST & Seigniorage charges. for Shoulders.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling in foundation with Stone dust trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Plain Cement Concrete (1:4:8) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but including unskilled wages etc., complete for finished item of work for Foundations Bed

Providing concrete for plain/reinforced concrete RCC M -15 in open foundations using 40 mm, 20mm and 10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Drain walls.

Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and Labour charges etc complete.

Plain Cement Concrete (1:4:8) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but including unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)(CSSR)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for Footing

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for columns.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for Plinth Beam.

Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. 501 & 504).including Un Skilled Labour (CSSR)

Plastering with CM (1:5), 12 mm thick single coat including cost and conveyance of all materials, labour charges,

Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to MS Iron Gate with synthatic enamel paint tow coats over primer coat of red oxid including cost and conveyance of all materials and labur charges etcc omplete

Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., but excluding VAT for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc.

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including overhead charges & Contractors profit but excluding VAT & Seignorage charges

Plain Cement Concrete (1:4:8) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for Column Footings

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for Column Pedestals

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Columns

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for Plinth Beams

RR Masonry in cm (1:8) prop with RR stone including cost and conveyance of all materials and alllabour charges etc. complete

Filling Basement with Quarry rubbish in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc, hire charges of T & P etc., complete for finished item of work.

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Lintels

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Roof Beams

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Roof slab 125mm thich

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. -For superstructure

VRCC M-25 grade design mix 20mm & 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for SUN SHADE

Ornamental plastering to Ceiling 12mm thick in CM (1:3) with dubara sponge finish ,mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work.

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing for internal walls. GROUND FLOOR

Providing and fixing factory-made uPVC any colour sliding glazed window upto 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in- built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Flooring with vitrified tiles of Ist quality set over bse coat of CM(1:8) 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread at 3.30Kg per sqm & Jointed neatly with white cement paste to full depth mixed with mixed with full depth of pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with soluble salt porcelain vitrified tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water for finished item of work.

Providing and fixing factory-made uPVC any colour sliding glazed ventilators 0.6m in height dimensioncomprising of uPVC multi- chamberedframe with in- built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site sales & other taxes, incidental operational and all labour charges etc, complete.

Supply and fixing of Teak wood double shutter of size 1.20x 2.10 mt with frame made of Sal Wood scantlings of size 100 x 75mm and Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mmthick including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long Aluminum aldrop-1 no, 200mm Aluminum tower bolt - 1no, 125 long Aluminium butt hinges 6 No's, Aluminum fancy handles 150 mm -2nos with necessary screws complete.

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208).

Supplying, fitting and placing HYSD bar reinforcement Fe-415, in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded