Upgradation of Block Development Office Kangan including electrification Block Kangan BDC 60

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing PVC panelling to walls and ceilings using premium quality virgin PVC tongue and groove panelsof approved shade, colour and design not less than 8mm thick fixed over an approved framework of GI channels treated wooden battens ant suitable spacing with stainless steel/clips including all necessary PVC edge trims, cornerr profiles, joining strips,adhesives, fasteners, cutting, fitting, finishing and making goodthe surfaces complete in all respectsas per EIC

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. two coats

Provision for signboard,photographs, fiitings and fixtures, electrical fittings, (1no 3pin socket,1 no heating) other unforeseen items to be paid APA

1. SITC OF LT Panel Enclosure Outdoor Type with canopy Measuring 32”(h) × 44”(w) × 10”(d) made out of 1.6mm thick CRCA sheet duly powder coated Wall mounted comprising of: Incomer 1: * MCCB 100A FP 30 KA With Spreader Terminals - 1 No * Busbar 1: 200A TPN Aluminium - 1 Set Incomer 2: * Changeover Switch 3 Phase 100A 4 Pole - 1 No * Busbar 2: 100A TPN Aluminium - 1 Set Incomer 3: * MCB 40A DP 10 kA - 1 No * Busbar 3: 100A SPN Aluminium - 1 Set Outgoing MCBs: * 63 amp DP, 10 kA = 3 No * 40 amp DP, 10 kA = 3 No * 32 amp DP, 10 kA = 1 No * 20 amp DP, 10 kA = 1 No Metering: * Digital Voltmeter C1 1.0 3 Ph with indication Lamps - 2 Sets * Digital Ammeter C1 1.0 1 Ph with make indication Lamps - 1 Sets Wiring & Other Panel Accessories - As Required, MCCB/MCBs shall be Curve C.

Wiring for circuits/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor Havells/Anchor/Eq.make, single core cable in surface/recessed medium class PVC conduit (including its supply and fixing alongwith accessories and making good the surface) as required. 1×10 sq mm for lighting sub main. Note: The ckt may be drawn as per requirement on site.

Wiring for circuits/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor Havells/Anchor/Eq.make, single core cable in surface/recessed medium class PVC conduit (including its supply and fixing alongwith accessories and making good the surface) as required. 1×6 sq mm for lighting sub main. Note: The ckt may be drawn as per requirement on site.

Wiring for circuits/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor Havells/Anchor/Eq.make, single core cable in surface/recessed medium class PVC conduit (including its supply and fixing alongwith accessories and making good the surface) as required. 1×4 sq mm for lighting sub main. Note: The ckt may be drawn as per requirement on site.

Supply and fixing of 6(4+18)/24 way (4 quadrant) horizontal type Three pole and neutral sheet steel, MCB distribution board, 415 V, on surface/recessed, complete with neutral bus bar, earth bar, din bar interconnection power painted including earthing etc. as required. (But without MCB/Rccb/Isolator) Make: Hager/Legrand/LSK/equivalent standard.

S/F testing and commissioning of MCB of the below mentioned capacities in sub main control Legrand C curve series 6-25 Amp SP MCB