Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance BLOCK D PLOT NO 234 1 100FT ROAD IDA AUTONAGAR VISAKHAPATNAM VISAKHAPATNAM ANDHRA PRADESH 530012 | VISAKHAPATANAM | ANDHRA PRADESH | 530012 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical 1ST FLOOR 2 106 KASSIA UDYOG BHAWAN 17TH CROSS MAGADI CHORD ROAD VIJAYA NAGAR BANGALORE KARNATAKA 560040 | BENGALURU URBAN | KARNATAKA | 560040 | Rejected-Technical NOT Meeting NIT creteria |
Tender Value
₹23.3 L
EMD Value
₹46,580
Closing Date
21 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer, C and M
Superindenting Engineer, UC-1 annex office, BARC(V) main campus, Gajuwaka -Yellamanchili Road, Maduturu Sub Post Office, Visakhapatnam-531 011
Machining of structures platforms plates hollow cylinders shafts blocks and sections out of SS MS acrylic and polymer materials and their assembly at CAD BARC Main campus at Atchutapuram Near Visakhapatnam AP
2024_BARC_797925_1
BARC(V)/CAD/Machining Work/01
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
540 days
Atchutapuram, Visakhapatnam
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹46,580
Atchutapuram,Visakhapatnam
25 Apr 2024
29 Feb 2024
28 Mar 2024
29 Feb 2024
21 Mar 2024
15 Mar 2024
29 Feb 2024 - 11 Mar 2024
11 Mar 2024
Amount
Machining of MS plates: Raw Material of MS plate of size 350x175x12.5mm is to be used for the machining operation. The raw material needs to be milled on all 6 sides to ensure perpendicularity and smoothness. The final dimension must be 300x150x10mm. Slotting has to be done along the length of plate at a width of 11mm. Through holes- 30no’s of diameter 10.5mm has to be drilled on the plate. M10 and M8 tappings, each 20no’s has to be made along the length of the plate. Roughness value within 50microns has to be obtained. All the operations have to be done in milling and band saw cutting machine. Note: a) All tools and tackles including milling, cutting , drilling and slotting tool for the same has to be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Acrylic plates: Raw Material of acrylic plate of size 1800x900x12.5mm is to be used for the machining operation. The final size of machined component should be 80x80x10mm. The raw material needs to cut with minimum loss of material. The cut piece has to be milled on all 6 sides to ensure perpendicularity and smoothness. Through holes- 20no’s of diameter 6.5mm has to be drilled on the plate. M10 and M8 tappings, each 06no’s has to be made along the length of the plate. Note: a) All tools and tackles including milling, cutting , drilling and slotting tool for the same has to be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Al7075-T6 Hollow cylinders: Raw material of diameter 25mm will be provided. The raw material has to be turned into a hollow cylinder of length 25mm, inner diameter 16mm and outer diameter-21mm. The 16mm ID should be bored to a length of 23mm, leaving 2mm flat face. Tolerance of 0.05mm has to be ensured. All the operation is to be done in lathe machine. Note: a) All tools and tackles including turning, parting and facing tools for the same has to be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Copper Hollow Cylinders: Raw material of Copper-OFHC material of diameter 75mm is to be turned into a ring of outer diameter 61.3mm, inner diameter 57.3mm and length -10mm. The material has to be cut into desired length in band saw machine. And then turned in lathe machine to obtain final dimension and tolerance of 0.05mm. Roughness of 10microns must be ensured on the outer and inner diameter. Note: a) All tools and tackles including parting, turning, facing, boring and radius tool must be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Al6061-T6 Hollow cylinders: Raw material of diameter 65mm is to be turned into a cylinder open at one end. The outer diameter of finished product must be 61.3mm, thickness-5mmand length -70mm. The whole operation has to be done in lathe machine. Note: a) All tools and tackles including parting, turning, facing, boring and radius tool must be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of SS Shaft: Stainless steel rod of 25mm diameter has to be made into shafts of diameter 24.2mm and length 1.5m. The facing and turning operation has to be done in lathe machine. Straightness of 0.1mm/m has to be ensured. Roughness of 5microns or less has to be ensured. Note: a) All tools and tackles including facing, turning, grinding and parting has to be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of MS Block: Raw material of size 150x150x150mm has to be finished into final component of size 130x130x130mm with a hole of diameter 80mm at the centre. Milling operation has to be done on all 6 sides to ensure surface finish of 20microns. Holes of 10.5mm diameter are to be drilled on face perpendicular to 80mm bore at radius of 60mm from centre. Note: a) All tools and tackles including cutting, end mill, face mill, grinding, boring and drilling has to be arranged by vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Aluminium Blocks: Raw material of size 200x200x200mm has to be finished into final component of size 180x180x180mm with a hole of diameter 80mm at the centre. Milling operation has to be done on all 6 sides to ensure surface finish of 20microns. Holes of 10.5mm diameter are to be drilled on face perpendicular to 80mm bore at radius of 60mm from centre. The block is then to be cut by at the centre in to two halves each forming a C- section at the center. Note: a) All tools and tackles including cutting, end mill, face mill, grinding, boring and drilling has to be arranged by vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of I-Sections: Raw material for machining will be copper-OFHC rod of diameter 50mm diameter and length 80mm. Turning operation has to be done to turn it into an I-section with flange cross section of diameter 48mm and thickness -10mm and web of diameter -19mm. the length of web will be 55mm. All operations are to be done in lathe machine.6 holes of diameter 6.5mm are to be made on each flange as directed by EIC. Note: a) All tools and tackles including parting, facing, drilling and grinding is to be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Structures: Welded structures are to be machined out of L-angles, C-channels, and strips. All components will be mild steel. The components are to be cut as per dimensions provided by Engineer-In-charge and made into a truss structure by welding operation. Proper cutting of edges and its preparation has to be done for ensuring strong welding joints. Finally anti-rust paints must be applied on the structure. Typical size of truss will be 4mx2m frame formed by cross linked elements. Note: a) All tools and tackles including cutting tools, welding rods, all fitting tools needed for the same must be provided by vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of SS Platforms: Platforms of dimension 2000mmX600mm and thickness 40mm has to be machined. Straightness must be ensured below 0.2mm. Roughness must be ensured below 50microns. The raw material will be SS304 plates. SS plates are to be cut into desired plates and then milling must be done on all sides to ensure parallellality and straightness within 0.2mm. Tapped holes must be provided along the length of platform at a pitch of 50mm. 4 rows of M10 tappings are to be made on the platform through the thickness. Through holes of 22mm diameter as to be made along the periphery of plate. A maximum of 20 such holes are required. Note: a) All tools and tackles including cutting, end mills, face mill, drill bits, taps and grinding tools must be arranged by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of CS Platforms: Platforms of dimension 2000mmX600mm and thickness 32mm has to be machined. Straightness must be ensured below 0.2mm. Roughness must be ensured below 50microns. The raw material will be Carbon steel(CS) plates. CS plates are to be cut into desired plates and then milling must be done on all sides to ensure parallellality and straightness within 0.2mm. Tapped holes must be provided along the length of platform at a pitch of 50mm. 4 rows of M10 tappings are to be made on the platform through the thickness. Through holes of 22mm diameter as to be made along the periphery of plate. A maximum of 20 such holes are required. Note: a) All tools and tackles including end mills, grooving cutters and facing tools are to be arranged by vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Machining of Rails: Rails are to be made of carbon steel blocks of dimension 500x200x100mm. Groove of length 500mm and depth 20mm has to be made on block. All sides are to be properly milled to ensure flatness within limits as directed by EIC. Note: a) All tools and tackles including end mills, grooving cutters and facing tools are to be arranged by vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Cost towards tools for various operations. (Repair and service tools to be supplied for maintenance of all machines including lathe, milling, band saw cutter and welding machine. Accessories including safety gears like safety shoes, goggles, apron and hand gloves for safe handling of materials are to be supplied by vendor. Any cost incurring towards replacement of machine components caused by wear and tear, filling of lubrication oil, cutting fluids, cotton cloth, grinding paper and safe storage/packing of components is under the preview of vendor.) Note: a) All tools and tackles required for the maintenance/repair/replacement has to be brought by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
Cost towards Repair and service tools. (Repair and service tools to be supplied for maintenance of all machines including lathe, milling, band saw cutter and welding machine. Accessories including safety gears like safety shoes, goggles, apron and hand gloves for safe handling of materials are to be supplied by vendor. Any cost incurring towards replacement of machine components caused by wear and tear, filling of lubrication oil, cutting fluids, cotton cloth, grinding paper and safe storage/packing of components is under the preview of vendor.) Note: a) All tools and tackles required for the maintenance/repair/replacement has to be brought by the vendor. b) Raw material will be issued by BARC (V). c) All work is to be done as directed by Engineer-In-Charge, BARC(V).
HAYAGREEVAYA METAL INDUSTRIES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .