Special repairs to Bldg No 322 under GE North Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS)

Taking down cement or cement lime plaster, of any description and thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material and labour for rendering, 10mm thick, in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering, 15mm thick, in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering, 15mm thick, on other than fair faces of brick work or concrete surfaces, in cement mortar 1:4, mixed with WPC @2% by weight of cement or as per manufacturer’s instructions and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note : Supply only WPC shall be measured and paid separately.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of exterior plastic emulsion paint over a coat of primer complete all as specified and as directed.

Demolition of reinforced cement concrete, of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for mild steel TMT bars of 6 to 8mm dia, as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for dismantling and disconnecting of existing water tanks of capacity exceeding 250 litres and not exceeding 500 litres and removing to store complete all as specified and directed.

Material and labour for dismantling and disconnecting of existing water tanks of capacity exceeding 500 litres and not exceeding 1000 litres and removing to store complete all as specified and directed.

Supply and fixing, water storage tank of 500 iltr capacity, HDPE triple layer, ISI marked, cylindrical vertical, with closed top, FDA approved, 100% UA stabilized, rust proof, hoisted and fixed in position on staging or roof slab complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and connections complete all as specified and directed. Note:- Make of tank shall be engraved on the tank and tank shall be white coloured.

Supply and fixing in repair, water storage tank of 1000 litre capacity, HDPE triple layer, ISI marked, cylindrical vertical, with closed top, FDA approved, 100% UA stabilized, rust proof, hoisted and fixed in position on staging or roof slab complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and connections complete all as specified and directed. Note:- Make of tank shall be engraved on the tank and tank shall be white coloured.

Supply and fixing of ball valves, 20mm dia, high pressure, of PTMT, with epoxy coated aluminium . rod and high density plastic ball, screwed for iron pipe and fixed. (Minimum weight -210gms ), ISI marked complete all as specified and directed. ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply and fixing of gun-metal gate valves, painted finish, with forged brass spindle and iron wheel head, Class-2, screwed both ends internally for iron pipe of 20mm bore and fixed complete all as specified and directed.

Supply and fixing of gun-metal gate valves, painted finish, with forged brass spindle and iron wheel head, Class-2, screwed both ends internally for iron pipe of 15mm bore and fixed complete all as specified and directed.

Material and labour for taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour for taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing of galvanised iron tubing, 15mm dia, medium grade, with and including all fittings such as bends, elbows, tees, short pieces, union etc. concealed and fixed in walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of galvanised iron tubing, 20mm dia, medium grade, with and including all fittings such as bends, elbows, tees, short pieces, union etc concealed and fixed in walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of extended wall mounted EWC of size 370 x 650 x 765mm or 660 x 460 x 760mm or 670 x 390 x 760mm with 'S' trap of size 220mm and inbuilt cistern including PP seat cover, hinges etc. and fixing complete with all necessary items and accessories complete all as specified and as directed. Make: Jaquar cat part No.-FIS-WHT-5351, FLS-WHT-5201 or Hindware cat part No.-20058 and 21028 or Cera cat part No.-S1031102, S1060102, S1510108.

Supply and fixing in repair, vitreous china, white, squatting pan of Orissa pattern, size 580mmx440mm, white, first quality, with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including lime concrete, making good to disturbed surface of sub base and flooring with the existing surface and connection to flush pipe complete all as specified and as directed. Make: Cera/Hindware/Parryware/Prayag

Supply and fixing in repair, vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connecting to existing/new low level flushing cisterns, existing/new flush pipe and drain (or out going pipe) and fixing in position complete all as specified and directed Make: Cera/Hindware/Parryware/Prayag

Supply and fixing in repair, counter top wash hand basin of size 470 x 470mm or 480 x 365mm or 500 x 420mm including 32mm dia brass chromium plated waste coupling with PVC pipe and PVC connection complete all as specified and directed. Make: Jaquar cat part No.-FIS-WHT-5935 or Hindware cat part No.-91041 or Cera cat part No.-S2020108.

Supply and fixing in repair, vitreous china half stall urinal, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe. including of fixing/connecting to existing/new supply pipe, trap and waste pipe complete all as specified and directed.

Supply and fixing in repair, low level, virgin polypropylene cistern, white, 10 litre capacity, ISI marked, complete with PVC bend/flush pipe and making all connections including making good the disturbed surface to match with the existing surface complete all as specified and as directed. Make: Cera/Hindware/Parryware/Prayag

Material and labour for waste fittings, 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc., ISI marked, with long screwed shanks and fly-nuts, flange end bedded in red lead cement with PVC waste pipe and other end fixed complete all as specified and as directed.

Material and labour for waste fittings, 40mm dia, brass, chromium plated for glazed ware sinks, basins, etc., ISI marked, with long screwed shanks and fly-nuts, flange end bedded in red lead cement with PVC waste pipe and other end fixed complete all as specified and as directed.

Supply and fixing of bib taps, 15mm dia, brass chromium plated with long body, fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing of pillar taps, 15mm bore dia, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed Make: Cera/Hindware/Parryware/Prayag

Supply and fixing of stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make: Cera/Hindware/Parryware/Prayag

Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make: Cera/Hindware/Parryware/Prayag

Supply and fixing of health faucet for EWC complete all as specified and directed. Make: Prayag cat part No.-Bea-81 or Hindware cat part No.-F160027 or Cera cat part No.-F8030101.

Supply and fixing of chromium plated single lever basin mixer complete all as specified and directed. Make: Jaquar cat part No.-FIS-WHT-5935 or Hindware cat part No.-91041 or Cera cat part No.-S2020108.

Supply and fixing of toilet paper holder with flap steel chromium plated complete all as specified and directed. Make: Jaquar cat part No.-ACN-11535 or Hindware cat part No.-F84009 or Cera cat part No.-F5003110.

Supply and fixing of brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges complete all as specified and directed. Make- PRIMA Cat No PDX -4501 A or ESSCO Cat No-1111 or Prayag Cat No. BA-50 .

Supply and fixing of steel chromium plated soap dispencer with glass bottle with holder and hanger complete all as specified and directed. Make: Jaquar cat part No.-CAN-1135N or Cera cat part No.-F5007111.

Supply and fixing of steel chromium plated soap dish complete all as specified and directed. Make: Jaquar cat part No.-FIS-WHT-5935 or Hindware cat part No.-91041 or Cera cat part No.-S2020108.

Supply and fixing of steel chromium plated towel ring, round, 150mm dia complete all as specified and directed. Make: Jaquar cat part No.-AQN-7721 or Hindware cat part No.-F88007 or Cera cat part No.-F5002105.

Supply and fixing of steel chromium plated corner glass shelf with bracket complete all as specified and directed. Make: Jaquar cat part No.-FIS-WHT-5935 or Hindware cat part No.-91041 or Cera cat part No.-S2020108.

Supply and fixing of 110mm dia UPVC soil, waste, drain pipe, ISI marked, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with necessary stay clamps complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing of 75mm dia UPVC soil, waste, drain pipe, ISI marked, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches/floors complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing of PVC (SWR) bends, 110mm bore, any type, of any radius complete all as specified and directed.

Supply and fixing of PVC (SWR) bends, 75mm bore, any type, of any radius complete all as specified and directed.

Supply and fixing of PVC (SWR), 75mm dia outlet, multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing of PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Demolition of stone slabs and tiles, of any description or thickness, in floors, aprons etc. including cement mortar bedding complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and rubbish off the defence land remises complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the tile colour complete all as specified and directed.

Material and labour for premium quality, glazed coloured ceramic tiles of size 350 x 450 x 7mm thick or 250mmx350mmx7mm thick, on vertical surfaces of walls such as skirting/dado/risers of steps etc., over and including 10mm thick rough finished plaster in cement mortar (1:3), set, jointed in neat cement slurry and pointed in coloured cement to match tile colour complete all as specified and directed. Note:- Size of tile shall be cut as required.

Material and labour for premium quality, joint free, non skid designer ENDURA coloured ceramic tiles (Square/rectangular), of size 300 x 300 x 10mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the tile colour including demolition of existing tiles and removing rubbish outside MD land complete all as specified and directed. Make: Endura of M/s HR Johnson or equivalent in Orient bell, Kajaria

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in flooring/ path etc, 25mm thick, finishing exposed surfaces of concrete even and smooth using extra cement complete all as specified and as directed.

Material and labour for granite tile or slab (of Jet black type), 16-20mm thick, machine cut and machine polished and moulded as in cooking platform, steps, jambs,, pillers, window cills and like etc, set in 20mm thick cement mortar (1:4) and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Material and labour for drilling holes in granite slabs for bolts, pipes, etc.n. exc 25mm dia complete all as specified and directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (wthout taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of powder coated (50 micron) aluminium anodised window and ventilator shutters, double panel shutters, sliding type, without sash bars, aluminum sections of size 40mm x 20mm x 105mm fixed in aluminum anodised frame of section size 63.5mm x 38.18mm x 2mm including necessary jointing cleats, glazing clips, aluminimum anodised snap beading, screws, aluminium beading, PVC packing, aluminium anodised fittings & fixtures with and including stainless steel wire cloth of 0.50mm nominal dia of wire & average width of aperature 1.00mm and fixed with tinned tacks or galvanised wire staples and necessary fittings and fixtures complete all as specified and directed. Make-Hindalco/Jindal/Indal

Supply and fixing of powder coated (50 micron) aluminium anodised window shutter sliding type without sash bars 44.5mm thick (single panel) fabricated with 2mm thick section and all rails 83.50mm thick fixed in aluminum anodised frame of section size 63.5mm x 38.18mm x 2mm including necessary jointing cleats, glazing clips, aluminium anodised snap beading, screws, aluminium beading, pvc packing, aluminium fittings and other necessary fittings & fixtures such as 01No of 150mm long Peg Stay, 01 No of 100mm size Decorative type D type handle, 02 Nos 150mm long tower bolts, 03 Nos of Butt hinges in Each shutter with necessary fittings and fixtures 4.8mm thick tinted glass with necessary beading/packing and necessary fittings and fixtures etc complete all as specified and directed. Make-Hindalco/ Jaindal/Indal

Supply and fixing of powder coated (50 micron) aluminium chequered grills as on aluminium windows, weight not exceeding 0.50kg/sqm and fixed complete all as specifed and directed. Make-Hindalco/Jindal/Indal

Supply and fixing of powder coated (50 micron) aluminium anidised door chowkhats of size of 101.60 x 44.75 x 3.18mm standerd aluminium sections with jointing cleats for fittings etc fixed to walls with aluminium sections complete all as specified and directed. Make-Hindalco/Jindal/Indal

Supply and fixing of powder coated (50 micron) aluminium anodised door shutters of 44.5mm thick single or double leaf, hund type without sash bars with (two panels), fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail 150mm and middle rail 115mm, including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fittings such as pair of 'D' type handles (decorative type) tower bolts 150mm 2 No for each shutters, aluminium beadings, PVC packing locking arrangements with mortice locks, 4.80 mm thick tinted glass with necessary beading/ packing and necessary fittings and fixtures complete all as specified and directed. Make-Hindalco/Jindal/Indal

Material and labour for aluminium die cast body door closer hydraulically regulated, designation No, 3, universal type, suitable for door shu tters of 851 to 1000 nun in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Material and labour for double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Material and labour for taking down, repairing and refixing of all types of aluminium door shutters of any size and pattern complete all as specified and directed.

Material and labour for tinted sheet glass, ordinary quality and glazing, 5.5mm thick, with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Dismantling of brick tiles laid on roofs in any mortar and bedding, single layer complete all as specified and as directed.

Demolition of unreinforced cement concrete/mud on roofs, of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantiling/ removing of old tar felt on roof and cleaning surface, incl removing existing water tanks, GI water pipe line etc and refixing the same in postion after roof treatment all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per sq. metre complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregatesas in levelling course on roof and in roof kerbs or mud stops or padding or filling roof depressions etc. complete all as specified and as directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricatd five layer weight not less than 3.60kg / Sqm water proofing membrane black finish reinforced with non woven polyster matt and applying on top of it one coat of hot straight run bitumen grade 30/40 (Grade S-35) confirming to IS-73 at the rate of 1.2kg/Sqm , make as approved consisting of a coat bitumious primer @ 0.40 ltr/Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25'C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end the layer membrane shall be laid using butine gas torch and sealing all joints etc after preparing the surface complete as per standard practice as per manufacture's instuctions. The vital physical and chemical parameters of the membrane shell be under:- (i) Joint strengh in longitudinal and transverse direction at 23'C at 650/450 N/5cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the suthorised applicator of manufactures of membrane only complete all as specified. Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009)

Material and labour for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; laid in floors over and including 15mm thick bedding layer in cement mortar 1:4, set, jointed and pointed in neat cement slurry with grey cement and no pigment and cut and polished complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of wall, chajja, balcony, facia etc. and applying two coats of plastic emulsion paint using hand roller complete all as specified and as directed. Make: Apex os Asian or equivalent in Berger, Jenson & Nicholson, Nerolac

Material and labour for preparation of old decorated external surfaces of wall and applying one coat of exterior emulsion paint of approved colour complete all as specified and as directed. Make: Apex os Asian or equivalent in Berger, Jenson & Nicholson, Nerolac

Material and labour for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290.Gde-E-165 complete all as specified and as directed.

Material and labour for preparation of steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint complete all as specified and as directed.

Material and labour for false ceiling at a height of 12metre comprising 600 x600 x 15mm mineral fiber ceiling tiles RH-99 of type micro looks edge laid on superfine XL15mm exposed grid systems with 15mm wide T-section flanges. The frame work comprises of main runner of size 15x32x300mm spaced at 1200mm centre to centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire of 4.0mm dia shall be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 14 x 26 x 1200 mm interlocked between main runners at 600mm centres to centre to form a 1200mm x 600mm grid module, cut cross tees longer than that 600mm supported independently 600mm x 600mm moduless to be formed by fittings 600mm long flush fittings cross tees of size 15x26x600mm centrally between the 1200mm cross tees perimeter wall angle of size 19x19x30db, K value=0.052W/mk micro look edge has to be laid on the 600x600mm module including PVC clips to hod the ceiling tile complete including dismantling and removing of old unserviceable ceiling and ceiling boards from site complete, all as specified and directed. Make- Fine Fissured RH-99 of 'Amstrong' or Dexune or Hi-Steel or Saint Gobain

SCHEDULE A PART II (E/M WORKS)

Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked including mild steel sunken boxes, made out of 1.6mm thick mild steel sheet, with earth dolly, coated with two coats of anti corrosive paint over a coat of red oxide primer internally, covered with modular decorative cover plate for fixing of switches, socket outlets, fan regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs complete all as specified and directed for one light point (For FTL/Lamp holder/mirror light/light/bulk head light/bldg security light) controlled by one switch complete all as specified and as directed. Notes :- (i) Switch, socket and fan regulators to be measured and paid for separately. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only. Make of PVC Wire - Finolex, Polycab, Havells, RR Kabel, Grandlay Make of PVC Conduit- Finolex, Polycab, Kalinga Premium, Surya, Plaza

Description all as per Srl item No.2.02 here in before but for one fan point controlled by one switch.

Description all as per Srl item No.2.02 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.2.02 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per serial item No. 2.02 above, but with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed. Note- Switch, Socket shall be measured and paid separately and Steel junction boxes shall be used wherever junction boxes are to be fitted.

Description all as per serial item No.2.02 above All as per the description of Serial Item No 2.02 above, but with 4 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 4 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed. Note- Switch, Socket shall be measured and paid separately and Steel junction boxes shall be used wherever junction boxes are to be fitted.

Supply and fixing of switch, modular, 6 Amp, one way, one module, 230 volt complete all as specified and as directed. Make: Legrand (Arteor), Scheineder (Zencelo), Hager (Insista), ABB (Cheiron), L&T (Englaze)

Supply and fixing of switch, modular, 16 Amps, one way, one module, 230 volt, complete all as specified and directed. Make: Legrand (Arteor), Scheineder (Zencelo), Hager (Insista), ABB (Cheiron), L&T (Englaze)

Supply and fixing of socket, modular, 2/3 pin, 5 Amps, one way, two module, 230 volts complete all as specified and directed. Make: Legrand (Arteor), Scheineder (Zencelo), Hager (Insista), ABB (Cheiron), L&T (Englaze)

Supply and fixing of socket, modular, 2/3 pin, 6/16 Amps, combined, one way, two module, 230 volts complete all as specified and as directed. Make: Legrand (Arteor), Scheineder (Zencelo), Hager (Insista), ABB (Cheiron), L&T (Englaze)

Supply and fixing of electronic rotary stepped type fan regulator, modular, 120 watt, two module suitable for ceiling fan, any type/make/sweep complete all as specified and as directed. Make: Legrand (Arteor), Scheineder (Zencelo), Hager (Insista), ABB (Cheiron), L&T (Englaze)

Supply and fixing of ceiling rose surface bakelite 65x50mm, two to three terminals complete all as specified and as directed. Make: SSK/Anchor/Fine/Cona

Supply and fixing of lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mm x 75mm for mounting the fittings with and including one retrofit LED 9 watt lamp complete all as specified and as directed. Make: SSK/Anchor/Fine/Cona Make of LED Bulb: Philips/Bajaj/C&S/Wipro/Havells

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 6 to 40 Amps, ISI marked including taking down and removal of old unserviceable MCB of any capacity and type complete all as specified and as directed. Make- Siemens Betaguard, Schenider Acti 9, Hager Nevello Plus, Legrand Ekinox, L&T Exora, ABB Elegance

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, with one transperent acrylic main door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable MCB DB of any capacity, size and type complete all as specified and directed. Make- Siemens Betaguard, Schenider Acti 9, Hager Nevello Plus, Legrand Ekinox, L&T Exora, ABB Elegance

Supply and fixing of RCBO, double pole, 40 Amps capacity , 2 module, 300mA (HI immunity) sensitivity, 230 volts, 50 Hz, ISI marked including taking down and removal of old unserviceable RCBO of any capacity and type complete all as specified and directed. Make- Siemens Betaguard, Schenider Acti 9, Hager Nevello Plus, Legrand Ekinox, L&T Exora, ABB Elegance

Supply and fixing in repair of over voltage release, 230 volts, single phase, in one module suitable for single phase complete all as specified and directed. Make- Siemens Betaguard, Schenider Acti 9, Hager Nevello Plus, Legrand Ekinox, L&T Exora, ABB Elegance

Material and labour for sub main wiring with two single core FRLS (Fire Retardant Low Smoke), PVC insulated unsheathed copper conductor cable, 6 sqmm, drawn in and including rigid non metallic PVC conduit, medium grade, 25 mm dia, concealed on wall or ceiling, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS, green colour for earth continuity conductor including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of 6.0 sqmm cable and one run of concealed conduct shall be measured as one unit. Make of PVC Wire - Finolex, Polycab, Havells, RR Kabel, Grandlay Make of PVC Conduit- Finolex, Polycab, Kalinga Premium, Surya, Plaza

Supply and fixing of indoor decorative surface mounting LED tube light fitting, batten type, with poal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz with and including 18/20 watt LED tube rod luminaries (warm/cool as per site requirement), environment friendly, high efficient, T8 with aluminium extrusion, heat sink and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed. Make: Havells, Wipro, Philips, Bajaj, Crompton Greaves, C&S

Supply and fixing mirror light, 9/12 Watt LED wall fixture light luminaire, compact and energy efficient, epoxy powder coated, CRCA sheet including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed. Make: Havells, Wipro, Philips, Bajaj, Crompton Greaves, C&S

Supply and fixing of LED security light luminaire 45 watt , made up of die cast aluminum housing with black epoxy powder coatingwith cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 32mm bore medium grade of length 0.90 metre with MS clamps, bolts, nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using cable including disconnecting and taking down existing light fitting and removal complete all as specified and as directed. Make: Havells, Wipro, Philips, Bajaj, Crompton Greaves, C&S

Material and labour for new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (medium grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed.

Taking down ceiling or wall fan, sealing cable end, dismantling blades and removing fan and spray painting including filling cavities with filler with two coat of white duco paint after cleaning all dust, writing MES No with black colour permanent marker etc. complete all as specified and as directed.

Hanging only ceiling/wall fan and connecting up including provision of three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan complete all as specified and directed.

Single pole and neutral metal enclosure for geyser with a two pin and earth plug and socket complete with top one single pole 20 Amps MCB complete all as specified and directed. Make- Siemens Betaguard, Schenider Acti 9, Hager Nevello Plus, Legrand Ekinox, L&T Exora, ABB Elegance

Note:- Amount of credit of Rs. 49,138.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 77 & 78 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swami Enterprises

MAYANK ENTERPRISES

Sawhney Constructions

bhagwandasswazirchand

Sham Sunder Bansal

s.v.builders