Providing and Erecting Temporary E.I., Illumination and Standby DG Set for District Level Yoga Day Function at Dist. Chhotaudepur. ( Date :- 21/06/2026 )

Name Of Work :- Providing and Erecting Temporary E.I., Illumination and Standby DG Set for

District Level Yoga Day Function at Dist. Chhotaudepur. ( Date :- 21/06/2026 )

Qty. Description. Per. Amount.

No. In Figure In Words

10 Nos. 1 Higher charges for providing erecting and 295.93 Rupees Two 1st

Removing after use of good running condition hundred Day

300 mm/ 400 mm size low noise oscillation Ninety Five /Nos

type pedestal fan of good condition. Paise Ninety

42 Nos. 2 Hire charges for providing for temporary plug 26.26 Rupees 1st

point with 5/15Amp plug switch combined, Twenty Six Day

erected in wooden board complete Paise /Nos

7 Nos. 3 Hire charges for providing erecting and 297.95 Rupees Two 1st

dismantling after use in good running hundred Day

condition with necessary interconnecting Ninety /Nos

wire/cable on panel board. MCB Distribution Seven Paise

boards Three phase 230V 4 -6 -8 Way Ninety Five

7 Nos. 4 Hire charges for providing erecting and 309.06 Rupees 1st

dismantling after use in good running Three Day

condition. hundred /Nos

Section pillar fabricated from 16 SWG thick Nine Paise

M.S. Sheet with 40 x 40 x 6 mm thick angle Six Only

iron legs with 12 mm thick bakelite / wooden

sheet erected complete with following sizes

Section pillar having size 75 x 60 x

1044 Rmt. 5a Hire charges for providing, erecting & 4.04 Rupees Four 1st

dismantling after use of good running Paise Four Day

condition for PVC copper /Aluminium wire Only /RMT

mains with suitable copper PVC 1.5 /

Sq.mm earth wire of following size 2 wire

/1.5 / 2.5 Sq.mm Copper

388 Rmt. 5b 2 wire 4 /6 Sq.mm Copper 5.05 Rupees Five 1st

864 Rmt. 5c 4 wire 4 Sq.mm Copper 8.08 Rupees 1st

Eight Paise Day

Eight Only /RMT

434 Rmt. 6a Hire charges for providing erecting as per 19.19 Rupees 1st

direction of Engineer in charge dismantling Nineteen Day

after use of good running condition for Paise /RMT

temporary power supply the XLPE insulated Nineteen

armoured cable Aluminium conductor of Only

following size. 4 Core 16 / 25 Sq.mm

432 Rmt. 6b 3 1/2 Core 35 Sq.mm 23.23 Rupees 1st.

Three Paise /RMT.

264 Rmt. 6c 3 1/2 Core 95 / 120 Sq.mm 47.47 Rupees 1st

Forty Seven Day

Paise Forty /Rmt

7 Nos 7 Hire charges for providing, erecting with 195.94 Rupees One 1st

. necessary connection and dismantling after hundred Day

user of good running ELCBs/RCCBs Ninety Five /Nos.

conforming to IS 12640 and having sensitivity Paise Ninety

of 30 ma and short circuit withstand capacity Four Only

of 6 KA and Suitable for operation on 3 Phase

and neutral 415V having characteristic of

quick action & tripping with all advance

feature & do not incorporate any electronic

component for following Max rating 63 Amps

1 Nos 8 Hire charges for Providing & erecting weather 12326.04 Rupees 1st

. proof, dust & vermin proof / floor mounted Twelve Day

Front operated outdoor type cubical Panel Thousand /Nos.

board having IP 64 protection made from 14 Three

SWG thick CRC MS sheet for outer body and hundred

doors, 16 SWG thick CRC MS Sheet for Twenty Six

internal partition with neccessary supporting Paise Four

angles, flats including cutting.bending , Only

drilling, welding revetting, with internal

Partition and cable alley as per requirement &

instruction of Engineer in charge with

SUPPLY AND ERECTION OF of following

type switchgears /busbars with suitable size

of inter connecting PVC copper wire/ copper

strips,rubber grommets,rib,earth bus and

earth bolt, foundation flange- bolts - base

plates, sufficient Nos. of Hinged doors,

handles with locking arrangement &rubber

gasket complete .The panel shall be painted

with epoxy powder coating and have Cu.

. Each bus bar should insulated by color

coded sleeve. WITH PHASE INDICATING

Lamps--- Digital Multi function meter -

Voltage, Amperes & Frequency only) with

CTs coils) Each panel will contain earth bus

and earth bolts with danger notice board. [B]

Cubical panel with main interior 250 A 4 pole

on load Changeover switch and 250A

13 Nos 9 63/100 A Four Pole Moulded Case Circuit 910.01 Rupees Nine 1st

. Breaker with spreader terminal and indication hundred Ten Day

lamp mounted on cubical panel with complete Paise One /Nos.

proper termination . Only

1 Nos 10 200 A Four Pole Moulded Case Circuit 1969.5 Rupees One 1st

. Breaker with spreader terminal and indication Thousand Day

lamp mounted on cubical panel with complete Nine /Nos.

proper termination . hundred

56 Nos 11 Hire charges for providing and erecting 12.32 Rupees 1st

. Miniature circuit breaker single pole 6A to Twelve Day

25A suitable to operate on 240 V A.C. system Paise Thirty /Nos.

and having breaking capacity 10 KA to be Two Only

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

190 Rn 12 Hire charges for Supplying and erecting ISI 4.04 Rupees Four Rn Mtr

Mtr mark Medium class RIGID PVC /Flexible Paise Four

Pipes erected on/in wall or ceiling erected Only

with necessary fittings & boxes fixed with

adhesive solution & Clamps in approved

manner as directed

48 Nos 13 Hire charges for LED Flood Light Fittings with 994.85 Rupees Nine 1st

. High Power White LEDs wattage of 1 Watt hundred day /

and above assemble on single MCPCB, Ninety Four No.

efficiency more than 130 Im/w and corrosion Paise Eighty

free high pressure die cast aluminium Five Only

housing with smooth finish powder coated

and heat sink extruded aluminium with

diffuser and Polycarbonate optics/lenses with

company mark/name engraved or embossed

120 to 300 V, Power factor more than 0.95,

THD<10%, CCT 5000 K to 5700K, Uniformity

ratio >0.45, Luminaire efficiency >

Lumens/Watt, LED driver efficiency >85%.

CREE/OSRAM/PHILLIPS Lumileds

/NICHIA/SEOUL/BridgeLux(U.S.A) make LED

used for luminaire. (Each fitting required LM-

79 & LM-80 Certificates) Flood Light (IP-65),

Surge -4KV Above 150 watts to 240 watts

19 Nos 14 Hire charges for providing & dismantling 770.63 Rupees 1st

. earth pit of minimum bore dia.150mm size Seven day /

approved make Earthing Electrode consisting hundred No.

Pipe-in-Pipe Technology as per IS 3043-1987 Seventy

made of corrosion free G.I.Pipes having Paise Sixty

Outer pipe dia of 50mm having 80-200 Three Only

Micron galvanizing, Inner pipe dia of 25 mm

having 200-250 Micron galvanizing,

connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

6 Nos 15 Hire charges for providing erecting and 2310.88 Rupees Two 1st

. dismantling after use of good running Thousand day /

condition Industrial Air Cooler With Water Three No.

filling erected as per instruction of engineer-in hundred Ten

-charge Paise Eighty

1 Nos 16 Hire charges for440V A.C generating set 24652.08 Rupees 1

. following capacity with necessary fuel, mains, Twenty Four St.Day

switchgears & accessories complete running Thousand ./no

on load / no load with acoustic sound proof Six hundred

enclosure etc as per requirement. With Fifty Two

transportation charges up to 30 kms. 125 KVA Paise Eight

280 Mtr 17 Hire charges for providing, erecting, and 28.28 Rupees 1

dismantling after use Flexible PVC insulated Twenty St.Day

multistrand multi core 1.1 kv grade lSl marked Eight Paise ./Mtr.

copper wires for supplying poer to the sound Twenty

system of following size. (.2 5 Sq.mm 3 core Eight Only

round l PVC sheathed

I am / We are willing to carry out the work at ________% Above/below ___________________________

___________________________________% (Should be written in figure and words) of the estimate rates

mentioned above. Amount of my/our tender work out as under.:

Estimated Amount Estimated Amount

Put to Tender Rs.________________ Put to Tender Rs.________________

(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with the local

situation regarding materials, labour and other factors pertaining to work before submitting tender.

(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed specification

and other tender document of this work and agree to execute the same accordingly.

Note: (1) The Rates are inclusive all taxes, transport charges and storage charges except GST and applicable GST

will be added seperately in the bill and will be paid to the agency.

(2) The materials covered for wiring should be got approved from the Dy. Executive Engineer, in charge of

(3) The materials and work shall have to be used and carried out as specification in technical note.

(4) All works shall be carried out as per public works Department hand book and Other specifications of the

Dn. Or as directed.

(5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted

(5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted

(6) The material to be used in this work should be approved strictly from Engineer-in-charge / Deputy Ex.

Engineer as applicable.

(7) The agency will have to agree to carried out the work as per brand demand of concern Deptt.

(8) Credit of Dismentalled Material to be retained by Agency & Cost of Dismentalled Material Rs.Nill/- Will be

recoverd from the bill.

(Signature of Contractor)

Deputy Executive Engineer

Chhotaudepur Electrical Sub Division

R & B Deptt., Chotaudepur