Renewal Work Of Bahraich-Sitapur (SH-30B) Road In Km. 4.900 To 22.800 In District Bahraich (Vidhan Sabha-Mahsi)

Amount

Dense Graded Bituminous Macadam Grading II :- Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.[MORTH Ref. SI No. 5.04 B - 505.] (Including Cost of Bitumen VG-30)

Slurry Seal :- Providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface [MORTH Ref. SI No. 5.12 -512] (Including Cost of Bitumen VG-10)

Tack Coat :- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.[MORTH Ref. SI No. 5.02 - 503.] (Including Cost of Bitumen VG-10)

Bituminous Concrete Grading II :- Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.[MORTH Ref. SI No. 5.05 B - 507.] (Including Cost of Bitumen VG-10)

Construction of subgrade and earthen shoulders :- Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 [MORTH Ref. SI No. 3.18 - 305.]

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface :- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. in edges and center line.[MORTH Ref. SI No. 8-13 - 803.]

Same as above in item but providing Repeated bars of yellow colour thermooplastic coupound in 5 mm thickness.

BAWANDALY SINGH (BID ID -5037384)