Replacement of Old Damaged Sluice Shutters with New Sluice Gates at NRCP Drainage Pumping Station in 39th Division of RMC.

Fabrication, supply, erection, testing and commissioning of Hoist Parts Consisting of Supporting Structure Materials machinery labour cutting bending alogning anchoring welding finishing etc., complete as per specifications and approved drawings. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately).

Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sil beams, slide tracks, seal seats, guide plates etc., with all accessories including cost of all materials, machinery, labour charges etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately).

Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters, including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately.)

Painting of embedded metal parts and all types of gates, stoplogs, etc. on sand blasted surfaces with: One coat of inorganic zinc silicate (airless spray preferred) 70 ± 5 microns, and Two super coats with a total thickness of 300 microns (each 150 ± 5 microns) of solventless coal tar epoxy paint.Including cost of all materials, labour, scaffolding etc., complete with all leads and lifts.

MS Fabrication works with Mild steel, Structural steel, i.e., angles, channels & I-sections Etc., Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of all materials, conveyance to the work spot and all labour charges welding cutting, bending, painting with redoxide paint and all fabrication charges etc. complete as per S.S and as directed by the departmental authorities.

Supply, delivery and fixing of gear box with thrust bearing, screw rod, operating handle etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Supply, delivery and fixing of spindle rod with (63 mm dia) threading etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Engaging 16 Tonnes Capacity Hydraulic Tower Crane of long length boom on hire basis including hire charges, fuel charges, crew charges and all operational charges etc., complete as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for COLUMNS)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class from approved Kiln Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Removal of wet silt and sludge by manual means from sullage drains with aid of baskets and vessels including hire charges of T & P and conveyance of all materials to work spot and all labour chares etc. complete as per S.S. and as directed by the site engineer

Laying Sand bags in the stipulated places including cost of empty cement bag, sand, thread, stiching charges and labour charges with over head charges and contractors profit

Dewatering with 5Hp (Diesel) for bed concrete drain walls with oil enginel driven pump sets including Hire Charges, fuel charges crew charges labour charges, etc. complete as directed by the site engineer

Fabrication, supply, erection, testing and commissioning of Hoist Parts Consisting of Supporting Structure Materials machinery labour cutting bending alogning anchoring welding finishing etc., complete as per specifications and approved drawings. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately).

Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sil beams, slide tracks, seal seats, guide plates etc., with all accessories including cost of all materials, machinery, labour charges etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately).

Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters, including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and as directed by the Engineer-in-charge. (Without painting on mechanical cleaning surfaces which are added extra as per schedule of rates under items in this chapter and add as applicable separately.)

Painting of embedded metal parts and all types of gates, stoplogs, etc. on sand blasted surfaces with: One coat of inorganic zinc silicate (airless spray preferred) 70 ± 5 microns, and Two super coats with a total thickness of 300 microns (each 150 ± 5 microns) of solventless coal tar epoxy paint.Including cost of all materials, labour, scaffolding etc., complete with all leads and lifts.

MS Fabrication works with Mild steel, Structural steel, i.e., angles, channels & I-sections Etc., Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of all materials, conveyance to the work spot and all labour charges welding cutting, bending, painting with redoxide paint and all fabrication charges etc. complete as per S.S and as directed by the departmental authorities.

Supply, delivery and fixing of gear box with thrust bearing, screw rod, operating handle etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Supply, delivery and fixing of spindle rod with (63 mm dia) threading etc., including cost and conveyance of materials to work spot and all labour charges, complete as directed by the site engineer.

Engaging 16 Tonnes Capacity Hydraulic Tower Crane of long length boom on hire basis including hire charges, fuel charges, crew charges and all operational charges etc., complete as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for COLUMNS)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class from approved Kiln Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Removal of wet silt and sludge by manual means from sullage drains with aid of baskets and vessels including hire charges of T & P and conveyance of all materials to work spot and all labour chares etc. complete as per S.S. and as directed by the site engineer

Laying Sand bags in the stipulated places including cost of empty cement bag, sand, thread, stiching charges and labour charges with over head charges and contractors profit

Dewatering with 5Hp (Diesel) for bed concrete drain walls with oil enginel driven pump sets including Hire Charges, fuel charges crew charges labour charges, etc. complete as directed by the site engineer

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @18%

2. Provision for NAC @0.10%

3. Provision for Seigniorage Charges

4. Provision for DMF 30% on Seigniorage Charges

5. Provision for Merit 2% on Seigniorage Charges