CONSTRUCTION OF PAY & USE UNDER ROB NR. PANDEYNAGAR IN T.P.S. NO. 62 (DINDOLI- BHEDWAD-BHESTAN) IN SOUTH EAST ZONE (LIMBAYAT), SURAT.

Name of work : Construction Of Pay & Use Under ROB Nr. Pandeynagar in T.P.S. No. 62 (Dindoli-

Bhedwad-Bhestan) In South East Zone (Limbayat), Surat.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

(A) WORK UP TO PLINTH LEVEL

1 Excavation for foundation including sorting out and

stacking off useful materials and disposing of the

excavated stuff up to 50 mt. lead and all lift, watering

etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 51.50 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

2 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

250mm dia 10.00 Rmt 326.84

SMC SOR , ITEM NO. 94, PG. NO.

3 Providing & Filling Rubbles including hand packing & filling

interstics with Quarry Spalls complete for all leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO. 3 11.50 C.M. 1064.80

4 Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

Crushed stone agg 20m.m Nominal size) &curing comp.

excl. cost of form work in :(a) foundation & Plinth

(A) Foundation 3.00 C.M. 3005.76

(C) Grade Slab 0.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

5 Providing & laying cement concrete 1:2:4 (1 cement :

sand : 4 graded stone agg. 20 mm nominal size) & curing

comp. Includ. cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

(C) Grade slab 10.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

6 Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

456:2000 (latest revision) and as per tender specification

in all items including cost of form work and rendering but

excluding cost of reinforcement

(A) foundation, footing, base of columns and mass

(SOR SMC - MIX DESIGN PG. NO-14)

7 Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

456:2000 (latest revision) and as per tender specification

in all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74

(2) Having cross sectional area more than 0.085 sq. mt .up

(3) Having cross sectional area more than 0.12 sq. mt.

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

(3) Having cross sectional area more than 0.12 sq. mt .

(SOR SMC - MIX DESIGN PG. NO-14)

8 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 1.50 C.M. 3982.62

9 Providing & fixing IS Mark TMT Bar FE 500d reinforcement

for R.C.C. work incl. bending, binding & placing in position

Upto G.L./P.L. 2633.00 Kg. 76.21

(SOR SMC Pg No. 1 It No. 8)

10 Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. - Ground Floor

(SOR SMC Pg No. 2 It No. 16) 13.00 C.M. 4511.97

11 Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 89.00 C.M. 130.39

12 Filling in foundation and plinth with murrum or selected

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 25.00 C.M. 289.06

13 carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as

per 6131_part II concentration weight one litter give 1% 54.00 S.M. 82.89

concentration inclusive of one litter chemicals emulsions

application at the rate of 5 litter chemicals /sqmt of

surface is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

14 Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as

vertical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR 16.00 S.M 324.00

15 Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

TOTAL COST UP TO PLINTH

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

(B) WORK ABOVE PLINTH

16 Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

456:2000 (latest revision) and as per tender specification

in all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12587.74

Terrace Floor 0.00 C.M. 12627.34

(2) Having cross sectional area more than 0.085 sq. mt .up

Ground Floor 3.00 C.M. 11136.62

Terrace Floor 1.00 C.M. 11176.22

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 9190.79

Terrace Floor 0.00 C.M. 9230.39

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8994.86

Terrace Floor 0.00 C.M. 9034.46

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

Ground Floor 5.50 C.M. 8075.85

Terrace Floor 0.00 C.M. 8115.45

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 6999.09

Terrace Floor 0.00 C.M. 7038.69

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7887.74

Terrace Floor 0.00 C.M. 7927.34

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7306.10

Terrace Floor 0.00 C.M. 7345.70

(3) Having more than 13 cm. Thickness

Ground Floor 10.00 C.M. 6727.93

Terrace Floor 0.00 C.M. 6767.53

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 1.50 C.M. 9419.25

Terrace Floor 0.00 C.M. 9458.85

(SOR SMC Pg No. 2 It No. 13)

Ground Floor 1.50 C.M. 6913.25

Terrace Floor 0.00 C.M. 6952.85

(SOR SMC Pg No. 2 It No. 13)

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

17 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 2.50 C.M. 3982.62

18 Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

456:2000 (latest revision) and as per tender specification

in all items including cost of form work and rendering but

excluding cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7158.83

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9030.72

(SOR SMC - MIX DESIGN PG. NO-14)

19 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Ground Floor 2778.00 Kg 76.21

Terrace Floor 85.00 Kg 77.21

(SOR SMC Pg No. 2 It No. 15)

20 Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

Ground Floor 27.00 C.M. 4511.97

Terrace Floor 4.00 C.M. 4786.95

(SOR SMC Pg No. 2 It No. 16)

21 Providing & constructing Half brick masonary in Fly Ash

bricks having crushing strength not less than 70 kg/sq.cm

in c.m 1:4 (1 cement: 4 sand) curing etc complete.

Ground Floor 60.00 S.M. 678.86

Terrace Floor 0.00 S.M. 685.11

(SOR SMC Pg No. 2 It No. 17)

22 Providing & Applying 15mm.th.cement plaster in single

coat on brick/concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1 cement :

3sand) (A) For wall and similar surfaces -- Ground Floor

(A) for wall and similar surfaces

Ground Floor 281.00 S.M 237.51

Terrace Floor 25.00 S.M 265.65

23 Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For

wall and similar surfaces -- Ground Floor

(B) for ceilings and soffits of stairs

Ground Floor 98.00 S.M 214.60

(SOR SMC Pg No. 3 It No. 24)

24 Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC)at junction of brick work and

RCC work or two dissimilar surfaces, at all heights fixed by

nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 19.00 S.M. 102.00

First floor 2.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

25 Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Ground Floor 150.00 S.M 324.00

Terrace Floor 17.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28)

26 Providing throating or plaster drip and moulding it to

R.C.C. chajja etc.comp.. For all floor

Ground Floor 36.00 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

27 Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

Ground Floor 36.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

28 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement. (Basic Rate-

Ground Floor 0.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

29 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

Ground Floor 209.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

30 Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

comp.Size 24" x 24" For Antiskid tiles

Ground Floor 70.00 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

31 Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Ground Floor 0.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

32 Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

Ground Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

33 Providing and constructing sandwitch type Granite stone

platform 0.6 mt. wide & 0.75 mt. height, including one end

side granite stone (Double Polish) of 1.25 mt. height &

front granite stone patti of 10 cm wide, vertical partitions

of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3

with finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.12, It No. 123) MR

34 Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by

Engineer in charge etc. comp.For all Floors.

All Floor 0.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

35 Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows &clearstory windows incl. Indian teak

wood frames of finished size 12cm x7cm.incl. anodized

aluminum fixtures & fastenings incl. Primer coat of

approved quality & two coats of oil painting etc. For all

Floor (A) Fully Panelled

All Floor 6.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

36 Providing and fixing FRP frame size 125x65 mm and

mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides

& edges in Gel coat finish. The core of the shutter & frame

is to filed up with injected polyurethane foam done in situ

along with embedded wooden pieces for stiffening & also 16.00 S.M 2019.98

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of

S.S. hinges with fastener sleeve & alluminium fixtures &

fasteningsFor all Floors.

(SMC SOR,Pg No.5, It No. 55)

37 Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as

per approved shade & texture, of make incl. Sal wood 0.00 S.M 3720.00

frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 18.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

38 Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 63.50 x

38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm

x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt.

0.695 Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size

mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. 0.00 S.M 1705.67

of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm

thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. complete for window.For all Floors.

(A) Same as above but colour anodized 0.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

39 Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

mm x 1.30 mm (of jindal section no;8688, @ Wt.

Kg/mt), vertical member of size 92 mm x 31.75 mm x

mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mm x 18 mm 0.00 S.M 1591.87

x 1.29 mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8949 @ wt. of 0.456 kg/mt) with

mm thick transparent bronze colour tinted float glass with

powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per

(A) Same as above but colour anodized

All Floor 0.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

40 Providing and fixing standared extruded ofalluminium

section of size 63mm x 38.10mm x1.2mm , @ Wt.

Kg/mt with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

A) Same as above but Colour anodized 9.00 S.M 2414.00

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR

41 Providing & laying granite slab 18 mm thick in Window-

Door seal,Frames Etc laid on 10 mm thick cement mortar

1:4 (1 Cement: 4 Coarse sand) with necessary adhesive

material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp. (Basic Rate:

Rs. 1000.00/S.M.).For all Floors.

For all Floors. 35.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

42 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 372.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

43 Providing & fixing Powder Coated Aluminium partly

glazed and partly panelled partition using medium duty

sections of Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x 38.10mm (

Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt),

Galzing Clip with 5 mm thick clear float glass of approved

make including all other necessary fittings and fixtures.

Entire work will have to be made water proof using

necessary rubber sectioned wherever required. Gaps all

round the frame to be filled with approved water proof

sealent. Bottom portion of doors both side to be covered

with 12mm thick prelaminated particle board of approved

make and quality and as per design.

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 2400.00

SMC SOR Alluminium Work ITEM NO.7(A),Pg No.17 MR

44 Providing & fixing partly panel & partly glass Powder

Coated Aluminium doors with aluminium section of

Hindalco, Jindal , Narmada,Banco or Equivalent approved

make having Poder Coated outer frame Leg Partition

section of 63.50 mm x 38.10 mm having weight 1.158 kg. /

R.M. shutter section having size 83.5 mm x 44.45mm ( top

& bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door

vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. &

top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section

No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass

in acid frogting and 12 mm thick prelaminated sheet of

Greenlam, Panama or archid make as approved by

Engineer-in-charge including fixing brass pivot, handle, lock

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 3237.00

SMC SOR Alluminium Work ITEM NO.6(A),Pg No.17 MR

45 Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around

square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of

Red lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 0.00 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

46 Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters. (A) For

plain grill For all Floor

For all Floors 0.00 S.M 65.31

SMC SOR, colour works,item no.-8,Pg No.15

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

47 Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners

, stainless steel bolts etc., of

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only

weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners

SMC SOR, ITEM NO 120,Pg No.11, MR 0.00 Kg. 450.00

48 (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water proof test

as directed. (M.R.)

B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and

grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.(b) Laying

cement concrete using broken bricks/brick bats 25 mm to

100 mm size with 50% of cement mortar 1:5 (1 Cement :

Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4

added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet & other

adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test. All above operations to be down in order and

as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 80.00 S.M 511.00

SMC SOR, PAGE NO 7 IT NO 62 B M.R.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

(A) Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm.

th' in the floor of the depression & about 18mm th' On the

side walls of the depression up to the floor level, water

proofing plaster about 18 mm. th' be continued on the

walls above the floor level for a height of 600 mm. with

surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm

nominal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

For all Floors 0.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

49 Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glased

tiles of to be laid over cementr morter 1:3 to plain or slope

and to be tempered to bring morter crème out up to

surface using white cement including grounding off

jnctions and extending them up to 15 cm along the wall,

clearing with water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 80.00 S.M 747.29

50 Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other matter and

sand papered smooth.

(A) for wall and similar surfaces

For all Floors 306.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 98.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

51 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 306.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 98.00 S.M 79.39

SMC SOR , coiour works,Pg No.15,item no.-5

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

52 Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and

free from all loose dirt, chalk, grease, fungi, algae and

flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended. Minimum 4-6

hours duration is required between each coat of weather

shield max paint.For all Floors.

For all Floors 167.00 S.M 82.00

SMC SOR, coiour works,Pg No.17,item no.-17

53 Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing

complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 20.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

54 Providing & laying granite slab 18mm thick in skirting,

risers of steps,dedo and pillars laid on 10mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand) and finished with

flush pointing in white or colour cement including rubbing

& polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR PAGE NO 4,IT NO 40 M.R. 4.00 S.M 2449.00

55 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs

curing, layig including painting the exposed portion of

loops, all as per standard design complete.

For all Floors. 4.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

56 Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers

& the like. For all Floor

For all Floors. 5.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

57 Providing & fixing in position collapsible steel shutters

with vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with

bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Ground Floor 6.00 S.M 5865.10

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

SMC SOR , PAGE NO 5, IT NO

58 Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for Shelve joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.) (Basic Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 0.00 S.M 1050.00

59 Wall Vinyl Sticker 30.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

60 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100

SMC SOR, PAGE NO.13,IT NO 147 (MR)

61 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 148 (MR)

62 5mm PVC sheet Eco Vinyl (Any size) 30.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

63 Decorative theme base designing & painting with all

waterproof materials

SMC SOR, PAGE NO.13,IT NO 150 (MR)

64 Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth as

mentioned in manufacturer's specification, cleaning the

hole with required air blower and other necessary tools

and tackles, positioning, providing and grouting chemical,

allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-in

SMC SOR, PAGE NO.11,IT NO 126 (MR)

TOTAL COST OF SUPER STRUCTURE

(C) WATER & SUPPLY SANITATION

65 Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

mm size "P'or "S" trap for water closet squatting pan

joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117*

Jaquar ,HindWare

For all Floors. 0.00 Nos. 3275.00

SMC sor- Sanitary Items,Page no21,It No.

66 Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap with normal closing

seat cover L bend ncluding jointing the trap with soil pipe

in cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware

C0297*/ C0278, HindWare sleek 20011, Jaquar- CNS-WHT-

For all Floors. 7.00 Nos 3282.00

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

SMC sor- Sanitary Items,Page no21,It No.

67 Prov.& Fixing Health Faucet ABS Body with wall Hook and

1 Meter chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-

587 ,HindWare F160109

For all Floors. 0.00 Nos 971.00

SMC sor- Sanitary Items,Page no21,It No.

68 Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

1089NSQ ,HindWare F860075

For all Floors. 7.00 Nos 3465.00

SMC sor- Sanitary Items,Page no21,It No.

69 Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making

good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

For all Floors. 4.00 Nos 2656.00

SMC sor- Sanitary Items,Page no21,It No.7

70 Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet

or plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

All Floor 4.00 Nos 833.73

SMC sor Page no7 , It No.72

71 Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 4.00 Nos 1423.00

SMC sor Sanitary Items,Page no21, It No.

72 Providing & Fixing 15 mm Dia bib tap with wall Flange at

all floor levels, polished bright etc. comp

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

All floor 7.00 NO 1323.00

SMC sor Sanitary Items,Page no21, It No.

73 Providing & Fixing 15 mm Dia 2 way bib tap with wall

Flange at all floor levels, polished bright etc. comp

Make- Cera F2013163, Parry ware G4834A1, HindWare

Cat. No.: F530004, Jaquar FLR-5041N

All floor 0.00 NO 1755.00

SMC sor Sanitary Items,Page no21, It No.

74 Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare F280052

& CONCEALED STOP COCK F850105

All floor 0.00 NO 2110.00

SMC sor Sanitary Items,Page no21, It No.

75 Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long and

nuts, washer and brass flange complete, including cutting

and making good the wall where required.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat.

No.: F440020 F850094, jaquar CON 053 KN

For all Floors. 7.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

76 Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor

fasteners & accessories

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua

ACN 1121N ,HindWare F880007

For all Floors. 4.00 Nos 890.00

SMC sor Sanitary Items,Page no21,It No.

77 Providing & Fixing stainless steel recessed type Soap dish

of approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 4.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

78 Providing & fixing of overhead shower 80 mm (3”) dia with

3 flow with Overhead Shower arm 200 mm with wall

flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989

,HindWare Cat. No.: F160144

For all Floors. 0.00 Nos 1569.00

SMC sor Sanitary Items,Page no21,It No.

79 Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following nominal

diameter of self cleaning design with C.I. scread down or

hinged grating including the cost of cutting and making

good the walls.

All floor 20.00 558.36

SMC sor.Page no 8,It No.

80 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make for soil and waste discharge system at all

floor levels incl. All fixtures like bends, tees,shoe etc.

jointed with resin of approved brand & manufacture etc.

SMC sor,Page no 8 It No. 84 M.R.

81 Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex

make for rain water at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand

& manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SMC sor ,Page no 8, It No. 85 M.R.

82 Providing and fixing in position P.V.C. cowl vent to pipes of

prince, suprime, jain Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

83 Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as

per instruction given by Eng. incharge. For

75mm PVC pipe 20.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

84 Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

85 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SMC sor Page no8 It No. 87 MR

86 Providing and fixing M.S. holder bat clamps at all floor

level,of approved design to C.I. or S.C.I pipes including cost

of cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

87 Providing and fixing G.I. holder "Z" clamps at all floor

level,of approved pipes including cost of cutting holes and

making good the wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

88 Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC sor Page no8,It No.

89 Providing and fixing abonite ball cock of approved quality

as directed etc. comp.

SMC sor- Page no 8,It No.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

90 Providing, Lowering and laying joining R.C.C. NP2 CLASS

pipe in cement mortar in proportion 1:1 of following

nominal internal diameters including testing of pipes and

joints etc. complete.

SMC sor- Page no.8, It No.

SMC Storm drainage SOR 20-21, Page no1 It No.1

91 Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of

300mm X 300mm size (inside) including plastering smooth

inside and outside 15 mm thick in C.M 1:3 etc. comp.i)

square mouth traps (A)300 MM X 300 MM Size - P type.For

SMC sor,Page no 7, It No.

92 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside

to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 0.00 No. 3155.63

2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.'.(A) Precast

RCC heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. 2904.47

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC sor, Page no.7, It No.75

93 Providing & construction simple chamber of 23 cm. th'

B.B. Masonary in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab

with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size), Foundation concrete 1: 5: 10 & 0.00 No. 2932.93

fixing C.I. cover with frame to be not less than 38 kg. On

top etc. comp. Inside dimension, 455 x 610 mm &450 mm

deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no8,It No.76

94 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt.

Size having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 4.00 NO 958.17

95 Providing and fixing G.I, Rain water spout of 50 mm dia

and 30 cm Length

SMC sor- Page no6 It No. 64 3.00 NO 101.91

96 Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT 13261H ,HindWare BACK SMALL 60001 7.00 NO 2476.00

SMC sor- Sanitary Items,Page no.21, It No.8

97 Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 9.00 S.M 1050.00

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

98 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture

of the water proofing material, concrete work for top,

bottom slab & side pardi for under ground Tank & Item

incl. Necessary excavation & refilling the available earth,

15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M.

1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with

smooth finishing,watering etc.Comp.to all inner face of

tank curing etc. comp. incl. Locking arrangement, outlet,

inlet, overflow & wash out pipe arrangement as necessary

& C.I. Cover 0.60 x .045 weight not less then 35kg. etc.

com. as per structural drawing excluding Steel & as

directed by Engineer-in-charge

Under Ground water Tank 5000.00 Lit 5.96

SMC sor - It No.

99 Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor

levels, in flooring, treads of steps & landings laid on a bed

of 12 mm. Av. Th.C.M.1:3 (1cement : 3 sand) finished with

flush pointing in white cement etc.com. For all floors

Under Ground water Tank 1.50 SM 857.42

SMC SOR, Page no4, It No.

100 Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor levels

in skirting risers of steps & dado on 10 mm. th. C.M.1:3

(1cement :3 sand) including necessary cement paste for

fixing and joined with white cement slurry etc.complete.

Under Ground water Tank 13.00 SM 887.64

SMC SOR, Page no4, It No.

101 Providing & fixing IS Mark TMT FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.

comp. Upto G.L./P.L.

Upto G.L./P.L. 690.00 Kg. 76.21

SMC SOR- Page no1, It No.

102 Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace.

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

Electrical work

Part-01 Point wiring in Copper (MODULAR)

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade ZHFR PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete 30.00 Pt. 471.83

2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade ZHFR

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat. III 3.00 Pt. 660.55

3 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat. III 10.00 Pt. 496.99

4 Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR

PVC insulated multistrand copper wires, in following type

of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat. III 5.00 Pt. 732.46

5 Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type

Cat. III 5.00 Pt. 240.51

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

6 Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade ZHFR PVC insulated multi strand

copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat. III 1.00 Pt. 586.86

7 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

Cat.III 0.00 Ea. 152.35

8 (4) TV Co-axial Socket outlet Cat.III 1.00 Ea. 152.35

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

Complete Cat.III

9 Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction 200.00 Mtr. 22.25

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

11 Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc. 100.00 Mtr. 15.40

complete of following sizes. (1) 20 mm

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size .(2) 25 mm

13 Mains & Wires

Mains with 1.1 KV grade ZHFR PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor ZHFR PVC insulated stranded

wire of green colour for earth continuity of following size

(C) With oval conduit /PVC casing capping double lock type

(a) 2 wire 1.5 sq. mm 200.00 Mtr. 55.72

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

14 (b) 2 wire 2.5 sq. mm (From LDB to SB and SB to SB ) 50.00 Mtr. 77.03

15 Mains with 1.1 KV grade ZHFR PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor ZHFR PVC insulated stranded wire of green

colour for earth continuity of following size (C) with oval

conduit /PVC casing capping double lock type

(a) 2 wire 4 sqmm 50.00 Mtr. 110.54

(g) 4 wire 4 sq. mm 100.00 Mtr. 179.74

(b) 2 wire 6 sq. mm 0.00 Mtr. 145.59

16 Decorative call bell Ting-tong box type 250 volts complete

17 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(B) 4 core 25 Sq. mm 0.00 Mtr. 187.44

(C) 4 core 35 Sq. mm 0.00 Mtr. 251.64

18 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia 0.00 Mtr. 61.62

(B)63mm outer dia 0.00 Mtr. 72.75

19 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench

/ pipe at road crossing or floor of following size of cables.

(C) 4 core 6 Sq. mm 0.00 Mtr. 506.71

20 Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

21 Providing and erecting Street Light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the

brackets and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays, reducer

and with check nuts complete painted with one coat of

Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr 1 Ea. 683.03

22 Supplying & erecting approved make street light box

comprising CNC Processed robust housing made from

single sheet multi folded with high grade powder coating (

RAL-7032 Structure finish as Standard) of IP-55 degree of

Protection Gasket(PU Gasketing) of following size of Box.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

23 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminium

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(ii) 15 to 24 Watts 1 Ea. 1805.00

Subtotal Part-01

Part-02 LT Switchgear, Distribution Boards & LT Panel

24 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component.

for following Max. rating erected as directed

(ii) 40Amps. DP

Cat. III 1.00 Ea. 2233.98

25 Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component

for following Max. rating erected as directed.

(ii) 40Amps. FP

Cat. III 0.00 Ea. 2636.27

(iii) 63 Amps. FP Cat. III 0.00 Ea. 3038.55

26 Supplying & erecting approved make RCCB + MCB (Electro

magnetic type only) working on residual current device

having 10 KA short circuit breaking capacity and 30 mAmp.

Sensitivity & 30 mili sec. tripping time conforming to IS

12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected

including all materials lugs screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

27 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

28 providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

Cat III 6.00 Ea. 111.27

29 Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

30 sheets Steel powder coated enclosure suitable for

incorporating One/Two nos. MCB

31 Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

Cat-lll 0.00 Ea. 2610.59

Cat-lll 0.00 Ea. 4784.66

Subtotal Part-02

Part-03 Indoor Lighting Item

32 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

33 Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable

(iii) 10 to 15 watts Cat-III 10.00 Ea. 188.30

34 (B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV 0.00 Ea. 1794.03

Subtotal Part-03

Part-04 Fan & Accessories

35 Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

with remote unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current

and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge]

36 Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

37 Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty 3.00 Ea. 106.99

PVC box complete erected concealed in Ceiling with

necessary finishing.

38 Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM Cat.II 5.00 Ea. 2054.23

39 Providing 2.5mm.thick laminated acrylic sheet to cover the

fan hook or Fan box.

Subtotal Part-04

Part-05 Earthing System

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

40 Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp.

41 Providing and erecting Annealed bare Copper wire 8 to

42 Providing and erecting HOT deep Galvanised iron strip wire

43 Providing and erecting Pipe type earthing with 40 mm dia

2.5 mtr long 'B' grade G.I. pipe with necessary coupling

buch buried in specially prepared earth pit & G.I. earth 1.0 Ea. 821.69

wire of 8 SWG erected & connected as directed (For panel)

44 For using salt and charcoal / coke as required for pipe type

45 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg. charcoal and salt

with alternate layers of charcoal & salt, 20mm.dia. G.I.

pipe with Funnel with a wire mesh for watering & bricks

masonry block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised Iron /

copper earth wire No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end socket as

per direction & duly tested by earth tester confirming to IS

(As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 1 Ea. 2311.01

46 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

SR. NO. SOR RATE

DESCRIPTION QUANTITY UNIT AMOUNT

Subtotal Part-05 0

Part-06 Water Cooler & Purifier

47 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚ C within a hour, The water cooler

should be comprising of hermetically sealed compressor, 0 Ea. 40933.00

fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel. ◦

48 SITC of Water Purifire Eureka Forbs Make AG 200 or

Subtotal Part-06 0

Part-07 Motor, Pumps & Starter

49 Providing & erecting open well horizontal mono block

pump set with cast iron body, complete for three phase

submersible motor having

(B) 0.75 H.P. single phase open well motor pump set

having discharge of 170 LPM @ 20 mtr. head suitable for

25 mm dia delivery pipe with control panel

50 Supplying and erecting Direct - On - Line Starter with 18 A.

rating contactor and with 3.5 Amp. 18A range directly

operated in totally insulated elegant enclosure for single

phase operation up to 3 HP as per IS 13947 complete

erected on P.W. Block with necessary connection.

51 Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of

Engineer in charge on site complete with wiring

connection with existing wires , with copper conductor

from pump to upper and lower tank.

Subtotal Part-07

Total Electrical work

(A) Total amount up to plinth

(A) Total amount up to plinth

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

(CD Total amount of electrical work

(CD Total amount of electrical work

TOTAL (A+B+C+D)